Xerox Xerox 4110 User Manual - page 413
Xerox 4590/4110 Copier/Printer User Guide
11-35
11. Problem Solving
016-713
Cause
The password set to the mailbox and the inputted
password were not in agreement.
Remedy
Enter the correct password.
016-714
Cause
Specified mailbox did not exist.
Remedy
Create a mailbox or specify the existing mailbox.
016-716
Cause
Unable to spool TIFF file because of insufficient disk
space.
Remedy
Remove unnecessary documents and users stored on
the printer and then attach the hard disk. When attaching
a hard disk, contact the Customer Support Center.
Refer to “Delete Documents in the Scan & Other Jobs Mailbox” on
page 4-73.
016-718
Cause
PCL print data could not be processed as there was
insufficient memory.
Remedy
Reduce resolution, cancel 2 Sided printing or N up, and
try to print again.
016-719
Cause
PCL print data could not be processed as there was
insufficient memory.
Remedy
Increase the size of the print page buffer.
016-720
Cause
The PCL print data included a command which cannot
be processed.
Remedy
Confirm the print data and try to print again.
016-721
Cause
An error occurred during print processing. Probable
causes are as follows:
1. Printing was instructed by
Automatic Tray
Selection
when
Paper Type Priority
is set to
Automatic Tray switching Off
for all paper in the
Common Settings
.
2. ESC/P command error
Remedy
For 1, when printing by Automatic Tray Selection, set
one of the paper types to a setting other than
Automatic Tray switching Off
in
Paper Type Priority
.
For 2, check print data.
Refer to “Paper Type Priority” in the System Administration Guide.
016-722
Cause
Unsupported staple position is specified.
Remedy
Confirm the position, and specify the print data again.
016-723
Cause
Unsupported punch position is specified.
Remedy
Confirm the position, and specify the print data again.
016-728
Cause
An unsupported tag was included in the TIFF file.
Remedy
Check the print data.
Refer to “Scan Options” on page 3-38.
016-729
Cause
Unable to print because the number of colors/resolution
of the TIFF file exceeds the allowed range.
Remedy
Change the number of colors/resolution for the TIFF file,
and specify the print data again.
Refer to “Scan Options” on page 3-38.
Error Code
Category
Cause and Remedy
C P S M O