Xerox Xerox 4110 User Manual - page 86
Xerox 4590/4110 Copier/Printer User Guide
2-58
2. Copy
Transparency Separators
A blank sheet can be output and be inserted as a separator
between copied transparencies. At the same time, only the
required number of copies for distribution is printed. When loading
transparencies in Tray 5 (Bypass Tray), make sure that the paper
for the separators (or for distribution) is loaded at the same
orientation as that of the transparencies.
KEY POINT:
Xerox recommends OHP film. Use of films not
recommended by Xerox may cause machine breakdown or paper
jams.
1.
On the
All Services
screen, select
Copy
. Select the
Output
Format
tab and then select
Transparency Separators
.
2.
Select any item.
3.
Select
Save
to keep your changes.
No Separators
Transparency separators are not used.
Blank Separators
A blank sheet of paper is inserted as a separator each time a
transparency is copied. Only one set of copies can be made.
Blank Separators + N Sets
A blank sheet of paper is inserted as a separator each time a
transparency is copied. At the same time, only the required
number of copies for distribution is printed.