Xerox Xerox 4110 User Manual - page 46
Xerox 4590/4110 Copier/Printer User Guide
2-18
2. Copy
1.
Select
Independent X-Y%
.
2.
To specify the height and width ratios, use the
up
and
down
buttons.
Auto
Copies are made with the height and width ratios set automatically
to match the paper size. If this option is selected, a check mark is
added.
Auto (Copy All)
The height and width ratios are set automatically to match the
paper size and the document is copied at a slightly reduced size to
prevent image loss. If this option is selected, a check mark
appears in the
Copy All
check box.
KEY POINT:
If you select
Copy All
, you need to set border erase
dimensions to 0 inches (0 mm), depending on the size of the
original document. Note that even if the border erase is set to 0
inches (0 mm), the edge of the copied document sometimes
appears dirty or image loss sometimes occurs depending of the
size of the original.
X (width) Y (height)
Set the height and width ratios within the range from 25 to 400% in
1% increments.