Xerox Xerox 4110 User Manual - page 45
Xerox 4590/4110 Copier/Printer User Guide
2-17
2. Copy
Copy All (Full Screen)
To prevent image loss, the document is reduced to just below
100% when it is copied. If this option is selected, a check mark
appears in the
Copy All
check box.
KEY POINT:
If you select
Copy All
, you need to set border erase
dimensions to 0 inches (0 mm), depending on the size of the
original document. Note that even if the border erase is set to 0
inches (0 mm), the edge of the copied document sometimes
appears dirty or image loss sometimes occurs depending of the
size of the original.
When Variable% is Selected
You can enter any ratio for copying. Set the ratio within the range
from 25 to 400% in 1% increments.
1.
Select
Variable%
.
2.
Specify the ratio with the numeric keypad or the
up
and
down
buttons.
If you enter an incorrect value, select
C
.
When Independent X-Y% is Selected
You can specify different height and width ratios to scale the
height and width independently.