Yamaha FZ6-ST Supplementary Service Manual - Eng
Other manuals for FZ6-ST:
Supplementary Service Manual, Owner's Manual
of
469
5-21
CYLINDER HEAD
ENG
NOTE:
19 Nm (1.9 m
Skg, 14 ftSlb)
50 Nm (5.0 m
Skg, 36 ftSlb)
12 Nm (1.2 m
Skg, 8.7 ftSlb)
NOTE:
EAS00233
INSTALLING THE CYLINDER HEAD
1. Install:
Sgasket
New
1
Sdowel pins
2
2. Install:
Scylinder head
Pass the timing chain through the timing chain
cavity.
3. Tighten:
Scylinder head bolts
1
X
10
1st
2nd
Scylinder head bolts
11
,
12
SLubricate the cylinder head bolts with engine
oil.
STighten the cylinder head bolts in the proper
tightening sequence as shown and torque
them in two stages.
SFirst, tighten the bolts
1
X
10
to approximate-
ly 19 Nm (1.9 m
Skg, 14 ftSlb) with a torque
wrench and then tighten the 50 Nm (5.0 m
Skg,
36 ft
Slb).
4. Install:
Sexhaust camshaft
Sintake camshaft
Refer to “INSTALLING THE CAMSHAFTS”.