Yamaha FZ6-ST Supplementary Service Manual - Cool
Other manuals for FZ6-ST:
Supplementary Service Manual, Owner's Manual
of
469
6-10
THERMOSTAT
COOL
NOTE:
12 Nm (1.2 m
Skg, 8.7 ftSlb)
NOTE:
EAS00466
INSTALLING THE THERMOSTAT
1. Install:
Sthermostat
Install the thermostat with its breather hole
a
facing up.
2. Install:
Sthermostat cover
Before installing the thermostat cover to the cyl-
inder head, lubricate the O-ring with a thin coat
of lithium soap based grease.
3. Fill:
Scooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.
4. Check:
Scooling system
Leaks
! Repair or replace any faulty part.
5. Measure:
Sradiator cap opening pressure
Below the specified pressure
! Replace the
radiator cap.
Refer to “CHECKING THE RADIATOR”.