Massage c hai r instruction manuals luxury massage chair model no.: tc-626 be sure to read this instruction manuals carefully and use it properly after use, keep this manual reach at all time for future use.
Thanks for purchasing our massage chair, please read this manual thoroughly especially on the part of safety issues in order to use this massage chair properly, and keep this manual within reach at all time for future use. Contents important safety instructions . . . . . . . . . . . . 2 specificatio...
Safety instruction *please read this manual carefully before use - the points quoted here are indispensable to using the product properly and to prevent hazards or damages to the user or other people. - after reading through, keep the manual at a safe place where you can consult it whenever necessar...
Safety instruction *please read this manual carefully before use - user must follow the instruction of manual while using massage chair . - do not use massage chair with other medical treatment device to decrease its effect or get injured. - don’t let kids or pet play around massage chair such as be...
Product name massage chair model no. Tc-626 input voltage refer to products label power consumption refer to products label frequency refer to products label net weight 95kgs material pu unit set carton size 1400(l) *830(w) *1220(h)mm p.4.
Product structure main part of massage chair (front) p.5 head pad back rest controller seat pad arm rest back pad shoulder set foot rest castors.
Main part of massage chair (back) p.6 fix part of back pad and head pad, removable back cover controller interface power switch fuse power wire.
Product installation a. Unpack and remove accessories a. Unpack the packaging tape and move upward of the outer box. B. Move down the side board box at the top. Then remove the styrofoam on each side. C. Remove the accessory box for use. D. The content of accessory box is controller, controller stan...
C. Install of controller stand a. Take out the controller stand from assessor box and remove the plastic bag. B. Loose the 4 screws of the side board with phillips screwdriver. C. Match the end of controller stand to the hold on side board. Tighten the 4 screws with phillips screwdriver. D. Take the...
Product installation notice ＊ please don ’t place the massage chair under the direct sun light and near the heater, will cause discolor and stiffen ＊ please place cloth or something alike under the massage chair to prevent abrasion and noise ＊ please make sure there is no obstacles around massage ch...
Make sure the product in good condition make sure have installed the backrest pad and head pillow pad make sure the power plug no abnormal make sure the footrest frame is in the vertical position (may lead to breakage and damage at the level state of footrest, when you sit or impose very vigor...
1. Remote controller operation description: p.11 front side power pause display window seatrest portion zero gravity timing adjustment auto programs footrest adjustment position adjustment width adjustment speed adjustment air pressure massage area massage position area adjustment. Manuals programs.
2. Remote controller’s function description power on/off. This button for starting/stopping the massage chair. Press once on this button and the back light of the controller will be lighted, the massage chair is in idle mode. Press this button again to stop all massage functions. Pause. The pause bu...
Operation description adjust chair position function button manual features massage area p. 13 keep pushing the button, then it make footrest position keep up and down separately. Keep pushing the button for adjustment the backrest and footrest position. (note: backrest and footrest move together at...
Display function: 1. Auto massage process display. 2. Massage style and strength display. 3. Massage chair backrest, footrest ajustment display. 4. Zero gravity position ajustment display. 5. Remain time display. 6. Pause status display. 7. Massage roller width display. 8. Spot/ area massage display...
About turn off p.15 1. After massage, press the power button on the controller, it will adjust the backrest and footrest to the initial position. * please make sure it's clear around the chiar in advance. 2. After massage chair stop all the actions, please put controller on the holder. 3. Please pre...
Care and maintenance p.16 use only a dry cloth to clean the machine to prevent water seepage. Plastic part, tube and leather could be cleaned by neutral detergents also, but it have to be mop with dry cloth after that. Please mop it with dry cloth softly or clean it with hairbrush. Please keep it dr...
Trouble shoot * please confirm the following situations before request for repair. Because the product might be stop working due to the improper operations or other simple reasons, therefore please report to our customer service if the following situations happened. * it's normal when operation soun...
The rollers stop working suddenly. No reaction accupoint recognition function failure backrest or foot rest doesn't reset to the initial position. Broken please stop use the product. P.18 - when excessive force, the roller will stop working due to the safety concerned. - turn off the machine, and tu...
