1. DL manuals
  2. 2N
  3. Speaker System
  4. Helios IP
  5. Configuration Manual

2N Helios IP Configuration Manual

Manual is about: IP INTERCOM

Summary of Helios IP

  • Page 1

    Www.2n.Cz version firmware 2n ® helios ip ip intercom configuration manual 2.11 2.11.

  • Page 2: Content

    The 2n telekomunikace a.S. Is a czech manufacturer and supplier of telecommunications equipment. The product family developed by 2n telekomunikace a.S. Includes gsm gateways, private branch exchanges (pbx), and door and lift communicators. 2n telekomunikace a.S. Has been ranked among the czech top c...

  • Page 3: Content

    Content 1. Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Express wizard for basic settings . . . . . . . . . . . . . . . . . . . . 6 3. Model differences and function licensing . . . . . . . . . . . . . 11 4. Signalling of operational statuses . . . . . . ...

  • Page 4: 1. Product Overview

    4 2n telekomunikace a.S., www.2n.Cz ® 1. Product overview the door intercoms can smartly replace traditional doorbell 2n helios ip ® push-button speakerphone panels and all wiring, bells and home intercom installations in buildings with structured cabling. The intercoms provide more advanced and wid...

  • Page 5

    5 2n telekomunikace a.S., www.2n.Cz ® safety abide by this information to prevent persons from injury. Always warning abide by this information to prevent damage to the device. Always caution important information for system functionality. Tip useful information for quick and efficient functionality...

  • Page 6: 2. Express Wizard For Basic

    6 2n telekomunikace a.S., www.2n.Cz ® 2. Express wizard for basic settings lan connection setting you have to know the intercom configuration interface address to connect to the lan successfully. Automatic ip address retrieval from the dhcp server is set by default in the intercoms. Thus, if connect...

  • Page 7: Firmware Update

    7 2n telekomunikace a.S., www.2n.Cz ® firmware update we also recommend you to update your intercom firmware upon the first login to the intercom. Refer to for the latest firmware version. Press the www.2n.Cz update button in the menu to upload firmware. The firmware system maintenance / intercom wi...

  • Page 8: Quick Dial Button Settings

    8 2n telekomunikace a.S., www.2n.Cz ® – set the sip proxy ip address or domain name. Proxy address – set the sip registrar ip address or domain name. The sip registrar address proxy and sip registrar addresses are usually identical. – enable intercom registration with the set sip registrar. Registra...

  • Page 9

    9 2n telekomunikace a.S., www.2n.Cz ® you can also use the intercom with one or more ip phones without a 2n helios ip ® sip server. Use the for outgoing calls and enter the called phone sip direct sip call address ( ) instead of the phone number. Sip:phone_number@phone_ip_address electric lock switc...

  • Page 10

    10 2n telekomunikace a.S., www.2n.Cz ® enable the switch in the parameter in the switch enabled hardware switches / / tab, set the to the intercom output to which the electric switch 1 controlled output door lock is connected. Now set one or more activation codes for the electric door lock switching...

  • Page 11: 3. Model Differences and

    11 2n telekomunikace a.S., www.2n.Cz ® 3. Model differences and function licensing this manual is valid for all members of the family and so some features 2n helios ip ® described herein are only available in selected models or need to be 2n helios ip ® activated with a valid licence key. This secti...

  • Page 12

    12 2n telekomunikace a.S., www.2n.Cz ® property/model 2n helios ip ® verso vario force safety uni audio kit video kit basic unit button count 1 1, 3 or 6 1, 2 or 4 1 1 or 2 up to 16 external programmable buttons button extenders up to 145 up to 48 no numeric keypad optional no digital input yes opti...

  • Page 13

    13 2n telekomunikace a.S., www.2n.Cz ® corresponding to the above mentioned licences. The licences can be combined arbitrarily. Property/licence enhanced audio enhanced video enhanced integration enhanced security nfc gold (profi) user sounds • • automatic audio test • • noise detection • • audio/vi...

  • Page 14: 4. Signalling of Operational

    14 2n telekomunikace a.S., www.2n.Cz ® 4. Signalling of operational statuses 2n helios ip ® generates sounds to signal switching and changes of operational statuses. Each status change is assigned a different type of tone. See the table below for the list of signals. Tone meaning user activated this...

  • Page 15

    15 2n telekomunikace a.S., www.2n.Cz ® call prolongation confirmation signalling calls are time-limited in for security reasons 2n helios ip ® (protection against blocking). Refer to the miscellaneous . Subsection for details internal application launched the internal application is launched upon po...

  • Page 16: 5. Intercom Configuration

    16 2n telekomunikace a.S., www.2n.Cz ® 5. Intercom configuration.

  • Page 17: Start Screen

    17 2n telekomunikace a.S., www.2n.Cz ® start screen the start screen is an introductory overview screen displayed upon login to the intercom web interface. Use the back arrow in the left-hand upper corner of the following web interface pages to return to this screen anytime. The screen header includ...

  • Page 18

    18 2n telekomunikace a.S., www.2n.Cz ® services phone – telephone and sip connection settings streaming – audio/video streaming settings (onvif, rtsp, multicast, etc.) onvif - onvif settings e-mail – e-mail sending and smtp connection settings automation – flexible intercom settings according to the...

  • Page 19: 5.1 Status

    19 2n telekomunikace a.S., www.2n.Cz ® 5.1 status the menu provides clear status and other essential information on the status intercom. The menu is divided into three tabs: , and . Device services licence device the tab displays basic information on the intercom model, its features, device firmware...

  • Page 21: Access Log

    21 2n telekomunikace a.S., www.2n.Cz ® access log the tab displays the last 10 records on applied cards. Each record includes access log the card tapping time, card id and type and description details (validity, card owner, etc.)..

  • Page 22

    22 2n telekomunikace a.S., www.2n.Cz ®.

  • Page 23: 5.2 Directory

    23 2n telekomunikace a.S., www.2n.Cz ® 5.2 directory here is what you can find in this subsection: 5.2.1 users 5.2.2 time profiles 5.2.3 access cards.

  • Page 24: 5.2.1 Users

    24 2n telekomunikace a.S., www.2n.Cz ® 5.2.1 users the users list is one of the crucial parts of the intercom configuration. It contains user information relevant for such intercom functions as quick dialling, rfid card/code door unlocking, missed call e-mails and so on. The users list contains up t...

  • Page 25

    25 2n telekomunikace a.S., www.2n.Cz ® numeric keypad and press * to start the call. This original fw 2.10 option is no more recommended due to potential user management troubles. – enter the switch activating user codes (door lock user switch codes activation, e.G.). A time profile can be assigned ...

  • Page 26

    26 2n telekomunikace a.S., www.2n.Cz ® you can assign up to three user phone numbers to each user position. In case the user is inaccessible on one number, the following number will be dialled after a ringing timeout. Enable the to enable dialling multiple parallel call to following number numbers s...

  • Page 27

    27 2n telekomunikace a.S., www.2n.Cz ® translation (nat) between the pc and intercom and the addresses have to comply with the router or another nat-executing device. The port1 (default value: 8003) parameter defines the destination port for the udp messages sent to . The port2 (default value: 80) p...

  • Page 28

    28 2n telekomunikace a.S., www.2n.Cz ® both for user activation and deactivation. User deactivation code – set a private user deactivation code: up to 16 characters including digits 0-9 only. User current state – select the current state of the user. Each user can be assigned a private switch activa...

  • Page 29

    29 2n telekomunikace a.S., www.2n.Cz ® one of the profiles is active at least. Double authentication - set card + numeric code authentication for a user: apply a valid user card and then enter one of the switch activating codes (within ten seconds after tapping) to activate the switch in this mode..

  • Page 30: 5.2.2 Time Profiles

    30 2n telekomunikace a.S., www.2n.Cz ® 5.2.2 time profiles such intercom functions as outgoing calls and rfid card/numeric code access, for example, can be time-limited by being assigned a . By assigning a time time profile profile you can: block all calls to a selected user beyond the set time inte...

  • Page 31

    31 2n telekomunikace a.S., www.2n.Cz ® list of parameters profile name – enter a profile name. This parameter is optional and helps you find items in the time profile list and select profiles in the switch, card and phone number settings more easily. This parameter helps you set time profiles within...

  • Page 32

    32 2n telekomunikace a.S., www.2n.Cz ® profile activation code – set the profile activation code: 16 characters including digits 0–9 only. If the activation code is the only code defined or the activation and deactivation codes are identical, then the activation code is used both for profile activat...

  • Page 33: 5.2.3 Access Cards

    33 2n telekomunikace a.S., www.2n.Cz ® 5.2.3 access cards each intercom user can be assigned one or more access rfid cards. Typically, the card id is included in the users list together with such user data as phone numbers, e-mail address and so on. Or, you can define the rfid cards in the installed...

  • Page 34

    34 2n telekomunikace a.S., www.2n.Cz ® trick to enter card ids: tap the card on the intercom reader and find it in the access . Double-click to select the card id and push ctrl+c. Now that you have the card log id in your box, you can insert it with ctrl+v in any intercom setting field. Having been ...

  • Page 35

    35 2n telekomunikace a.S., www.2n.Cz ® description gets displayed in the menu whenever the card is applied records and helps you find the card list items more easily without affecting the intercom function..

  • Page 36: 5.3 Hardware

    36 2n telekomunikace a.S., www.2n.Cz ® 5.3 hardware here is what you can find in this section: 5.3.1 switches 5.3.2 audio 5.3.3 camera 5.3.4 keyboard 5.3.5 buttons 5.3.6 display 5.3.7 card reader 5.3.8 digital inputs 5.3.9 extenders.

  • Page 37: 5.3.1 Switches

    37 2n telekomunikace a.S., www.2n.Cz ® 5.3.1 switches switches provide a very flexible and efficient control of such intercom peripherals as electric door locks, lighting, additional ringing signalling, and so on. Allo 2n helios ip ® ws you to configure up to 4 (depending on model types) independent...

  • Page 38

    38 2n telekomunikace a.S., www.2n.Cz ® list of parameters switch enabled – enable/disable the switch globally. When disabled, the switch cannot be activated by any of the available codes (including user switch codes), by a call or quick dial button. Switch mode – set the monostable/bistable mode for...

  • Page 39

    39 2n telekomunikace a.S., www.2n.Cz ® output type – if you use the security relay module, set the 2n helios ip ® output type to . In the mode, the output works in the inverse security security mode, i.E. Remains closed and controls the security relay module 2n helios ip ® using a specific pulse seq...

  • Page 40

    40 2n telekomunikace a.S., www.2n.Cz ® for example. During an outgoing call the switch is activated after sip message 180 ringing is received. The called party confirms ringing by this message. The switch is active during the whole call in the bistable mode, and activated by the call beginning and d...

  • Page 41

    41 2n telekomunikace a.S., www.2n.Cz ® http (get request) and must be as follows: http://ip_address/path. E.G.: . Http://192.168.1.50/relay1=on command sent upon deactivation – set the command to be sent to the external device (web relay, e.G.) upon switch deactivation. The command is sent via the h...

  • Page 42: 5.3.2 Audio

    42 2n telekomunikace a.S., www.2n.Cz ® 5.3.2 audio all the models are equipped with a speaker or power amplifier output 2n helios ip ® to which an external loudspeaker can be connected. Set the phone call and state signalling volume control in this configuration section. Set the to master volume e o...

  • Page 43

    43 2n telekomunikace a.S., www.2n.Cz ® adaptive volume – enable the adaptive volume mode in which the speaker volume is adjusted automatically depending on the noise level of the intercom installation site. – set the maximum gain to be applied to the master volume in maximum gain the adaptive mode. ...

  • Page 44

    44 2n telekomunikace a.S., www.2n.Cz ® values are relative against the set master volume. Switch activation tone volume – set the volume of the switch activation tone. The volume values are relative against the set master volume. User sounds volume - set the volume of the user sounds to be played. T...

  • Page 45

    45 2n telekomunikace a.S., www.2n.Cz ® noise level threshold - set the microphone noise level threshold for alarm setting. - set the time interval during which the signal must be above alarm start delay the threshold to start alarm. - set the time interval during which the signal must be below alarm...

  • Page 46: 5.3.3 Camera

    46 2n telekomunikace a.S., www.2n.Cz ® 5.3.3 camera this menu is only available in the models that are equipped with an 2n helios ip ® internal camera or can be connected to an external camera. The camera signal can be streamed directly into the call via a videophone, sent by e-mail, streamed via on...

  • Page 47

    47 2n telekomunikace a.S., www.2n.Cz ® camera. Ptz control enabled – enable the ptz (pan-tilt-zoom) function to control the camera display area during the call via dtmf (for 2n® helios ip verso only) from your ip phone numeric keypad. Click the * key to enable/disable the ptz mode. The meanings of t...

  • Page 48

    48 2n telekomunikace a.S., www.2n.Cz ® ir led brightness level - set the infrared led brightness level in the range of 0-100% in several steps. Infrared illumination is automatically activated in night mode. The ir led brightness level settings are only available in the and with hd camera models. 2n...

  • Page 49

    49 2n telekomunikace a.S., www.2n.Cz ® sensitivity threshold - set the lower and upper sensitivity and hysteresis limits for the motion detecting algorithm. - set the rectangular detection area in the image. Detection area - display the activity history (image brightness changes) activity graph incl...

  • Page 50

    50 2n telekomunikace a.S., www.2n.Cz ® to make the function work properly. Rtsp stream address – enter the ip camera rtsp stream address: rtsp://camera_ip_address/parameters. The parameters are specific for the selected ip camera model. If you choose another intercom for 2n helios ip ® the external ...

  • Page 51

    51 2n telekomunikace a.S., www.2n.Cz ®.

  • Page 52: 5.3.4 Keyboard

    52 2n telekomunikace a.S., www.2n.Cz ® 5.3.4 keyboard this configuration section helps you set the numeric keypad and quick dial button functions. Allows you to: 2n helios ip ® use the numeric keypad for dialling common phone numbers use the numeric keypad for dialling a user position use the numeri...

  • Page 53

    53 2n telekomunikace a.S., www.2n.Cz ® none – button pressing does not affect the call setup or active call. Hang up – button pressing terminates the call setup or active call. Dial the following – button pressing initiates dialling of the following user number in the users list. This accelerates th...

  • Page 54

    54 2n telekomunikace a.S., www.2n.Cz ® backlight level – set the keypad and button backlight level. Keyboard mapping the and models are equipped 2n helios ip audio kit ® 2n helios ip video kit ® with eight terminals for up to 16 external buttons or a keypad. The functions can be set for each button ...

  • Page 55: 5.3.5 Buttons

    55 2n telekomunikace a.S., www.2n.Cz ® 5.3.5 buttons assign the / users to the quick dial buttons. By default, all available directory users intercom buttons are assigned to the listed users. A non-assigned button can be used for automation or switch activation, for example. The bulk editing functio...

  • Page 56

    56 2n telekomunikace a.S., www.2n.Cz ® display the list of all potentially available intercom buttons including those that are physically absent. In some intercom models ( , 2n helios ip vario ® 2n helios ip ® ), the button list is divided into 8/5-item groups corresponding to the button verso exten...

  • Page 57: 5.3.6 Display

    57 2n telekomunikace a.S., www.2n.Cz ® 5.3.6 display some models are equipped with a colour display. Configure the 2n helios ip vario ® display exclusively via the . In this menu, you can only switch 2n helios ip manager ® the display on/off and set a few parameters. List of parameters display enabl...

  • Page 58

    58 2n telekomunikace a.S., www.2n.Cz ® incidence)..

  • Page 59: 5.3.7 Card Reader

    59 2n telekomunikace a.S., www.2n.Cz ® 5.3.7 card reader this menu is available in the and models 2n helios ip vario ® 2n helios ip force ® only. Configure the card reader in the menu. 2n helios ip verso ® extenders the card reader helps you control access to your building effectively using contactl...

  • Page 60

    60 2n telekomunikace a.S., www.2n.Cz ® accepted hid cards – set the type of hid prox cards to be accepted by the card reader. The card reader supports just one card type at an instant. This setting is not applied if you do not use the hid prox cards. Interface mode – enable the wiegand function and ...

  • Page 61: 5.3.8 Digital Inputs

    61 2n telekomunikace a.S., www.2n.Cz ® 5.3.8 digital inputs in this configuration section set the parameters associated with digital inputs and their interconnections with other intercom functions. The digital inputs are available in selected intercom models or where appropriate equipment is install...

  • Page 62

    62 2n telekomunikace a.S., www.2n.Cz ® assigned input – select one (or none) of the logic inputs for the departure button function. Activation of the departure button input activates the selected switch. The activation time and mode are set by the selected switch parameters. – set the active input m...

  • Page 63: 5.3.9 Extenders

    63 2n telekomunikace a.S., www.2n.Cz ® 5.3.9 extenders the intercoms can be enhanced with extending modules 2n helios ip verso ® connected to the intercom basic unit. The following modules are available: five-button module keypad module infopanel module card reader module i/o module wiegand module t...

  • Page 64

    64 2n telekomunikace a.S., www.2n.Cz ® brightness during day - set the led brightness percentage value for the day mode. Brightness during night - set the led brightness percentage value for the night mode . Current brightness - display the current led brightness value automatically selected accordi...

  • Page 65

    65 2n telekomunikace a.S., www.2n.Cz ® basic unit module configuration output 1 maximum power - set the maximum load to be connected to the power output available on the basic unit. When he the output is active, t consumption of the other modules (backlight level, etc.) can be adjusted automatically...

  • Page 66

    66 2n telekomunikace a.S., www.2n.Cz ® keypad module configuration no parameters are available to the public at present. Infopanel module configuration no parameters are available to the public at present..

  • Page 67

    67 2n telekomunikace a.S., www.2n.Cz ® card reader module configuration module name - set the module name for card reader logging purposes. - set the passage direction for the card reader (not specified, in, out) direction for the attendance system purposes. - enable multiple user authentication via...

  • Page 68

    68 2n telekomunikace a.S., www.2n.Cz ® i/o module configuration module name – set the module name for input/output specification in the setoutput, getinput and inputchanged objects in . 2n helios ip automation ® wiegand module configuration the wiegand module is equipped with the input and output , ...

  • Page 69

    69 2n telekomunikace a.S., www.2n.Cz ® module name - set the module name for input/output specification in the setoutput, getinput and inputchanged objects in the 2n helios ® settings. Ip automation direction - set the passage direction for the card reader (not specified, in, out) for the attendance...

  • Page 70: 5.4 Services

    70 2n telekomunikace a.S., www.2n.Cz ® 5.4 services here is what you can find in this section: 5.4.1 phone 5.4.2 streaming 5.4.3 onvif 5.4.4 e-mail 5.4.5 automation 5.4.6 http api 5.4.7 user sounds 5.4.8 audio test 5.4.9 web server 5.4.10 snmp.

  • Page 71: 5.4.1 Phone

    71 2n telekomunikace a.S., www.2n.Cz ® 5.4.1 phone the phone service is one of the basic functions of the intercom: helps you establish connections with other ip network terminal equipment. The intercoms 2n helios ® support the extended sip and are compatible with and certified by the leading sip pb...

  • Page 72

    72 2n telekomunikace a.S., www.2n.Cz ® explanation of ip telephony terms sip – is a phone call signalling transmission (session initiation protocol) protocol used in ip telephony. It is primarily used for setting up, terminating and forwarding calls between two sip devices (the intercom and another ...

  • Page 73

    73 2n telekomunikace a.S., www.2n.Cz ® sip 1 and sip 2 the 2n® helios ip intercoms allow two independent sip accounts (sip 1 and sip 2 tabs) to be configured. Thus, the intercom can be registered under two phone numbers, with two different sip exchanges and so on. Both the sip accounts process incom...

  • Page 74

    74 2n telekomunikace a.S., www.2n.Cz ® proxy address – set the sip proxy ip address or domain name. Proxy port – set the sip proxy port (typically 5060). Registration enabled – enable intercom registration with the set sip registrar. Registrar address – set the sip registrar ip address or domain nam...

  • Page 75

    75 2n telekomunikace a.S., www.2n.Cz ® sip transport protocol – set the sip communication protocol: udp (default), tcp or tls. Trusted certificate – specify one of the three sets of certificates issued by certification authorities to verify the sip server public certificate validity, refer to the ce...

  • Page 76

    76 2n telekomunikace a.S., www.2n.Cz ® rtp timeout – set the audio stream rtp packet receiving timeout during a call. If this limit is exceeded (rtp packets are not delivered), the call is terminated by the intercom. Set the parameter to 0 to disable this function. The parameter is only set for acco...

  • Page 77

    77 2n telekomunikace a.S., www.2n.Cz ® audio codec 1–4 – set the order of audio codecs for call setup: g.711 (pcma or pcmu), l16 or g.729. The order defines the codec priority, i.E. The first codec has the highest priority. Codec g.729 is available in selected intercoms only with a valid licence g.7...

  • Page 78

    78 2n telekomunikace a.S., www.2n.Cz ® in-band (audio) – enable classic dtmf dual tone receiving in the audio band. Rtp (rfc-2833) – enable dtmf receiving via the rtp according to rfc-2833. Sip info (rfc-2976) – enable dtmf receiving via sip info messages according to rfc-2976. Qos dscp value – set ...

  • Page 79

    79 2n telekomunikace a.S., www.2n.Cz ® video resolution – set the video resolution for phone calls. Video framerate – set the video frame rate for phone calls. Video bitrate – set the video stream bit rate for phone calls. Qos dscp value – set the video rtp packet priority in the network. The set va...

  • Page 80

    80 2n telekomunikace a.S., www.2n.Cz ® (packetisation mode 2). Set a value from the range of 96 through 127, or 0 to disable this codec type. H.263+ payload type – set the payload type for video codec h.263+ (packetisation mode 3). Set a value from the range of 96 through 127. Polycom compatibility ...

  • Page 81: 5.4.2 Streaming

    81 2n telekomunikace a.S., www.2n.Cz ® 5.4.2 streaming the intercoms provide several audio/video streaming methods; refer to 2n helios ip ® the table below: transmission method description jpeg/http static jpeg image transmission. Refer to the jpeg tab below. Mjpeg/http a series of consecutive jpeg ...

  • Page 82

    82 2n telekomunikace a.S., www.2n.Cz ® explanation of terms rtp (real-time transport protocol) – is a protocol defining the standard packet format for audio/video transmission via ip networks. Employs 2n helios ip ® this protocol for audio/video streaming. The rtp transport protocol is either udp or...

  • Page 83

    83 2n telekomunikace a.S., www.2n.Cz ® a. B. C. Set the video stream (video codec type, image resolution, frame rate and bit rate) parameters in the section. Video or, use the following rtsp uri and choose a codec type other than the currently set one: rtsp://ip_intercom_address/h264_stream rtsp://i...

  • Page 84

    84 2n telekomunikace a.S., www.2n.Cz ® video resolution – set the default image resolution for rtsp streaming. Video framerate – set the default video frame rate for rtsp streaming. Video bitrate – set the default video bit rate for rtsp streaming. Video quality - set the video compression level (fo...

  • Page 85

    85 2n telekomunikace a.S., www.2n.Cz ® jpeg here configure the simplest way of video streaming: jpeg/http and mjpeg/http. Send the following get address query to download images from the intercom: http://intercom_ip_address/api/camera/snapshot?Width= &height= w h or (for mjpeg, http server push): ht...

  • Page 86

    86 2n telekomunikace a.S., www.2n.Cz ® multicast receiver enabled – enable receiving of rtp packets on the selected multicast address and port. The audio stream received is played during an active call too and the sounds from the two sources get mixed. Receive address – set the multicast ip address ...

  • Page 87

    87 2n telekomunikace a.S., www.2n.Cz ® lan via the slp and the intercom gets registered with them automatically. The informacast server with which the intercom is registered can send the audio stream setting up commands to the intercom. Broadcast - the intercom receives audio from the informacast se...

  • Page 88

    88 2n telekomunikace a.S., www.2n.Cz ® ftp client enabled - enable camera image saving to the ftp server. Remote ftp server address - set the ftp server address in the ftp://ip_address or ftps://ip_address format. - set the ftp server username. The parameter is mandatory if the username ftp server r...

  • Page 89

    89 2n telekomunikace a.S., www.2n.Cz ® click to save the current ftp server configuration, load the camera apply & test image and save the image to the ftp server. The window above displays the ftp server communication details during saving..

  • Page 90: 5.4.3 Onvif

    90 2n telekomunikace a.S., www.2n.Cz ® 5.4.3 onvif list of parameters the intercoms are onvif compatible and fully implement the onvif 2n helios ip ® profile s. Discovery mode – enable the ws-discovery function, which allows the other onvif clients to search a compatible device in the lan. Set the p...

  • Page 91

    91 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. Note check the following rtsp and jpeg functions for enable to make the onvif function work properly (to gain full compatibility with the third party equipment): on the rtsp tab rtsp server enabled rtsp tab video stream enabled on the o rtsp tab udp...

  • Page 92: 5.4.4 E-Mail

    92 2n telekomunikace a.S., www.2n.Cz ® 5.4.4 e-mail to inform the intercom users on all missed and/or successfully completed calls, configure to send an e-mail after every call to the called user. You can 2n helios ip ® compile the e-mail subject and message text of your own. If your intercom is equ...

  • Page 93

    93 2n telekomunikace a.S., www.2n.Cz ® server address – set the smtp server address to which e-mails shall be sent. Server port – specify the smtp server port. Modify the value only if the smtp server setting is substandard. The typical smtp port value is 25. Username – enter a valid username for lo...

  • Page 94

    94 2n telekomunikace a.S., www.2n.Cz ® click to send a testing e-mail to the defined address with the aim to test apply & test the functionality of the current e-mail sending setting. Enter the destination e-mail address into the test e-mail address field and press the button. The current e-mail sen...

  • Page 95

    95 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. Send e-mail at – set e-mail sending upon outgoing phone calls. The e-mail is sent when the connection is terminated. The following options are available: any outgoing call - an e-mail will be sent upon every outgoing call. Missed outgoing call - an ...

  • Page 96

    96 2n telekomunikace a.S., www.2n.Cz ® attach snapshots – enable sending of an attachment including one or more camera snapshots taken during ringing or calling. Number of snapshots – set the count of snapshots to be attached to the e-mail message. Snapshot resolution – set the snapshot resolution f...

  • Page 97: 5.4.5 Automation

    97 2n telekomunikace a.S., www.2n.Cz ® 5.4.5 automation the intercom provides highly flexible setting options to satisfy variable 2n helios ip ® user needs. There are situations in which the standard configuration settings (switch or call modes, e.G.) are insufficient and so offers 2n helios ip ® 2n...

  • Page 98: 5.4.6 Http Api

    98 2n telekomunikace a.S., www.2n.Cz ® 5.4.6 http api 2n helios ip http api ® is an application interface designed for control of selected functions via the . It enables intercoms to be 2n helios ip ® http 2n helios ip ® integrated easily with third party products, such as home automation, security ...

  • Page 99: 5.4.7 User Sounds

    99 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. E. F. 5.4.7 user sounds the intercoms provide standard signalling of operational statuses by 2n helios ip ® tone sequences; refer to the signalling of operational statuses subsection. If you find the standard sound signalling inconvenient, modify th...

  • Page 100: 100

    100 2n telekomunikace a.S., www.2n.Cz ® list of parameters ringing before answering call – set the sound to be played before answering an incoming call (intercom ring tone). Call busy tone – set the sound to be played when the called user is busy. Call hang-up signalling – set the sound to be played...

  • Page 101: 101

    101 2n telekomunikace a.S., www.2n.Cz ®.

  • Page 102: 102

    102 2n telekomunikace a.S., www.2n.Cz ® 5.4.8 audio test the intercoms allow you to perform periodical tests of the integrated 2n helios ip ® speaker and microphone. For the test purpose, the integrated speaker generates one or more short beeps. The integrated microphone receives the generated tone ...

  • Page 103: 103

    103 2n telekomunikace a.S., www.2n.Cz ® test period – set the test period: daily or weekly. Test start time – set the test starting time in the hh:mm format. We recommend you to set a time at which a low intercom traffic is expected. Test now – push the button to start the test immediately regardles...

  • Page 104: 104

    104 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. 5.4.9 web server you can configure your intercom using a standard browser which 2n helios ip ® accesses the integrated web server. Use the secured https protocol for communication between the browser and intercom. Having accessed the intercom, ente...

  • Page 105: 105

    105 2n telekomunikace a.S., www.2n.Cz ® password – set the intercom access password. Press to change the password. The 8-character password must include one lower-case letter, one upper-case letter and one digit at least. Http port – set the web server port for http communication. The port setting w...

  • Page 106: 106

    106 2n telekomunikace a.S., www.2n.Cz ® invalid value! No yes active inactive active inactive .. .. .. While translating, modify the value of elements only. Do not modify the values. Id the language name specified by the attribute of the element will language be available in the selections of the we...

  • Page 107: 107

    107 2n telekomunikace a.S., www.2n.Cz ® 5.4.10 snmp the intercoms integrate a remote intercom supervision functionality 2n® helios ip via the snmp. The integrated snmp agent becomes available when the enhanced licence key is added. The intercoms support the snmp version 2c. Integration list of param...

  • Page 108: 108

    108 2n telekomunikace a.S., www.2n.Cz ® ip address - enter up to 4 valid ip addresses for snmp agent access to block access from other addresses. If the field is empty, the device may be accessed from any ip address..

  • Page 109: 109

    109 2n telekomunikace a.S., www.2n.Cz ® 5.5 system here is what you can find in this section: 5.5.1 network 5.5.2 date and time 5.5.3 licence 5.5.4 certificates 5.5.5 auto provisioning 5.5.6 syslog 5.5.7 maintenance.

  • Page 110: 110

    110 2n telekomunikace a.S., www.2n.Cz ® 5.5.1 network as the intercom is connected to the lan, make sure that its ip address 2n helios ip ® has been set correctly or obtained from the lan dhcp server. Configure the ip address and dhcp in the subsection. Network if you use the radius server and 802.1...

  • Page 111: 111

    111 2n telekomunikace a.S., www.2n.Cz ® static ip address – static ip address of the intercom, which is used together with the below mentioned parameters if the parameter is use dhcp server disabled. Network mask – network mask. Default gateway – address of the default gateway, which provides commun...

  • Page 112: 112

    112 2n telekomunikace a.S., www.2n.Cz ® tls authentication enabled – enable authentication of network devices via the 802.1x eap-tls protocol. Do not enable this function if your lan does not support 802.1x. If you do so, the intercom will become inaccessible. Trusted certificate – specify the set o...

  • Page 113: 113

    113 2n telekomunikace a.S., www.2n.Cz ® 5.5.2 date and time if you control validity of phone numbers, lock activation codes and similar by time profiles, make sure that the intercom internal date and time are set correctly. Most models are equipped with a back-up real-time clock to withstand 2n heli...

  • Page 114: 114

    114 2n telekomunikace a.S., www.2n.Cz ® synchronise – push the button to synchronise the intercom time value with your pc time value. Time zone – set the time zone for the installation site to define time shifts and winter/summer time transitions. Time zone rule – if the intercom is installed on a s...

  • Page 115: 115

    115 2n telekomunikace a.S., www.2n.Cz ® 5.5.3 licence some functions are available with a valid licence key only. Refer to the 2n helios ip ® subsection for the list of intercom model differences and function licensing licensing options. List of parameters licence key – enter the valid licence key. ...

  • Page 116: 116

    116 2n telekomunikace a.S., www.2n.Cz ® security licence are available. Enhanced audio – check whether the functions activated by the enhanced audio licence are available. Enhanced video – check whether the functions activated by the enhanced video licence are available. Enhanced integration – check...

  • Page 117: 117

    117 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. 5.5.4 certificates some network services use the transaction layer security (tls) 2n helios ip ® protocol for communication with other lan devices to prevent third parties from monitoring and/or modifying the communication contents. Unilateral or b...

  • Page 118: 118

    118 2n telekomunikace a.S., www.2n.Cz ® press to load a certificate saved on your pc. Select the certificate (or private key) file in the dialogue window and push . Press to remove a certificate from the load intercom..

  • Page 119: 119

    119 2n telekomunikace a.S., www.2n.Cz ® a. B. C. A. B. C. D. E. F. 5.5.5 auto provisioning the intercoms help you update firmware and configuration manually, 2n helios ip ® or automatically from a storage on a tftp/http server selected by you according to predefined rules. You can configure the tftp...

  • Page 120: 120

    120 2n telekomunikace a.S., www.2n.Cz ® 2n helios ip vario ® with mac address 00-87-12-aa-00-11 downloads the following files from the tftp server: hipv-firmware.Bin hipv-common.Xml hipv-00-87-12-aa-00-11.Xml configuration use the tab to set automatic configuration download from the server configura...

  • Page 121: 121

    121 2n telekomunikace a.S., www.2n.Cz ® at boot time – enable check and, if possible, update execution upon every intercom start. Update period – set the update period: hourly, daily, weekly and monthly. Update at – set the update time in the hh:mm format for periodical updating at a low-traffic tim...

  • Page 122: 122

    122 2n telekomunikace a.S., www.2n.Cz ® 5.5.6 syslog the intercoms allow you to send system messages to the syslog server 2n helios ip ® including relevant information on the device states and processes for recording, analysis and audit. It is unncecessary to configure this service for common interc...

  • Page 123: 123

    123 2n telekomunikace a.S., www.2n.Cz ® 5.5.7 maintenance use this menu to maintain your intercom configuration and firmware. You can back up and reset all parameters, update firmware and/or reset default settings here. Back up configuration – back up the complete current configuration of your inter...

  • Page 124: 124

    124 2n telekomunikace a.S., www.2n.Cz ® the intercom has obtained the ip address upon restart, the login window will get displayed automatically..

  • Page 125: 125

    125 2n telekomunikace a.S., www.2n.Cz ® 6. Supplementary information zde je přehled toho, co v kapitole naleznete: 6.1 troubleshooting 6.2 directives, laws and regulations 6.3 general instructions and cautions.

  • Page 126: 126

    126 2n telekomunikace a.S., www.2n.Cz ® 6.1 troubleshooting for the most frequently asked questions refer to . Faq.2n.Cz.

  • Page 127: 127

    127 2n telekomunikace a.S., www.2n.Cz ® 6.2 directives, laws and regulations europe 2n helios ip ® conforms to the following directives and regulations: directive 1999/5/ec of the european parliament and of the council, of 9 march 1999 – on radio equipment and telecommunications terminal equipment a...

  • Page 128: 128

    128 2n telekomunikace a.S., www.2n.Cz ® fcc note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installati...

  • Page 129: 129

    129 2n telekomunikace a.S., www.2n.Cz ® 6.3 general instructions and cautions please read this user manual carefully before using the product. Follow all instructions and recommendations included herein. Any use of the product that is in contradiction with the instructions provided herein may result...

  • Page 130: 130

    130 2n telekomunikace a.S., www.2n.Cz ® electric waste and used battery pack handling do not place used electric devices and battery packs into municipal waste containers. An undue disposal thereof might impair the environment! Deliver your expired electric appliances and battery packs removed from ...

  • Page 131: 131

    131 2n telekomunikace a.S., www.2n.Cz ® 2n telekomunikace a.S. Modřanská 621, 143 01 prague 4, czech republic phone: +420 261 301 500, fax: +420 261 301 599 e-mail: sales@2n.Cz web: www.2n.Cz 1759v2.