1. DL manuals
  2. 2N
  3. Speaker System
  4. Helios IP
  5. Installation Manual

2N Helios IP Installation Manual

Manual is about: IP INTERCOM

Summary of Helios IP

  • Page 1

    2n ® helios ip safety door access intercom installation manual version 1.2.1 www.2n.Cz.

  • Page 2

    The 2n telekomunikace a.S. Joint-stock company is a czech manufacturer and supplier of telecommunications equipment. The product family developed by 2n telekomunikace a.S. Includes intercoms, gsm and umts products, private branch exchanges (pbxs) and m2m solution. 2n telekomunikace a.S. Has been ran...

  • Page 3: Contents

    Contents 1. Product overview............................................................... 1 1.1 product description ....................................................................................................... 2 basic features.................................................................

  • Page 4

    4. Technical parameters ...................................................... 29 4.1 technical parameters .................................................................................................. 30 5. Supplementary information ............................................ 33 5.1 directives...

  • Page 5: Product

    1 1 1. Product overview in this section, we introduce the 2n ® helios ip safety product, outline its application options and highlight the advantages following from its use. Here is what you can find in this section: product description upgrade 2n ® helios ip safety components and associated product...

  • Page 6: Voip Telephones

    Product description 1.1 2 voip telephones 91378350 grandstream gxv3140 voip video telephone 91378351 grandstream gxv3175 voip telephone electric locks 932070e befo 1211 12v / 600 ma 932080e befo 1221 with momentum pin 932090e befo 1211mb with mechanical blocking power supply 91378100e 91378100us poe...

  • Page 7: Additional Modules

    Product description 1.1 3 additional modules 9151010 additional switch with normally open/closed contact and 12v switched output. 9159010 security relay 9137410e external ip relay terms and symbols.

  • Page 8: 1.1  Product Description

    Product description 1.1 4 1.1 product description basic features 2n ® helios ip safety is a highly resistant and reliable ip door access intercom provided with a lot of useful above-standard functions. Supporting the sip standard and being compatible with the leading ip pbx and telephone suppliers, ...

  • Page 9: Advantages of Use

    Product description 1.1 5 advantages of use uncompromising antivandal design high covering level – up to class ip69k variable mounting options (brick/plasterboard flush mounting, surface mounting) sensitive microphone and powerful loudspeaker bidirectional communication – acoustic echo cancelling in...

  • Page 10: 1.2  Upgrade

    Upgrade 1.2 6 1.2 upgrade the manufacturer reserves the right to modify the product in order to improve its qualities. Version changes.

  • Page 11: 1.3  2N

    2n® helios ip safety components and associated products 1.3 7 1.3 2n ® helios ip safety components and associated products basic units 9152101 1 button 9152101w 1 button, 10w loudspeaker, ip69k 2n ® helios ip safety is designed for outdoor applications and requires no additional roof. W- including p...

  • Page 12: Mounting Accessories

    2n® helios ip safety components and associated products 1.3 8 mounting accessories 9152000 mounting frame orange aluminum 9151001 brick flush mounting box stainless steel 9151002 plasterboard flush mounting box.

  • Page 13: Voip Telephones

    2n® helios ip safety components and associated products 1.3 9 voip telephones 91378350 grandstream gxv3140 voip video telephone 91378351 grandstream gxv3175 voip telephone electric locks 932070e befo 1211 12v / 600 ma 932080e befo 1221 with momentum pin 932090e befo 1211mb with mechanical blocking p...

  • Page 14: Additional Modules

    2n® helios ip safety components and associated products 1.3 10 additional modules 9151010 additional switch with normally open/closed contact and 12v switched output. 9159010 security relay 9137410e external ip relay.

  • Page 15: 1.4  Terms And Symbols

    Terms and symbols 1.4 11 1.4 terms and symbols symbols safety warning always abide by this information to prevent injury of persons! Warning  always abide by this information to prevent damage to the device. Caution important information for system functionality. Tip useful advice. Note additional ...

  • Page 17: Description And

    13 2 2. Description and installation in this section we describe the 2n ® helios ip safety product and its installation. Here is what you can find in this section: before you start mechanical installation electric installation.

  • Page 18: 2.1  Before You Start

    Before you start 2.1 14 2.1 before you start product completeness check please check the contents of your 2n ® helios ip safety delivery: 1 2n ® helios ip safety (selected model) 1 torx 10 / torx 20 double-ended wrench 1 spare sealing for big bushing for a thick cable, one hole 1 big blank with nut ...

  • Page 19: Mounting Type Overview

    Mechanical installation 2.2 15 2.2 mechanical installation mounting type overview refer to the table below for a list of mounting types and necessary components. 2n ® helios ip safety is preferably intended for surface mounting. For recessed mounting, it is necessary to order mounting frame or other...

  • Page 20

    Mechanical installation 2.2 16 recessed mounting – hollow bricks what you need: frame 9152000 brick flush mounting box, part no. 9151001 hole: 132 x 223 x 83mm flush mounting – plasterboard wall what you need: frame 9152000 plasterboard flush mounting box, part no. 9151002 hole: 118 x 235mm caution ...

  • Page 21: Common Mounting Principles

    Mechanical installation 2.2 17 common mounting principles caution make sure that the dowel holes have the required diameter. If the diameter is too large, the dowels may get loose. Use some suitable building adhesive to keep the dowels in place. Make sure that the hole depth is sufficient too! The d...

  • Page 22: Surface Mounting

    Mechanical installation 2.2 18 surface mounting wall (surface) mounting is used where flush mounting is inapplicable (in concrete and steel structures, entry barrier columns, etc.). The frame is not used. Caution if there is a risk of vandalism (in public garages, e.G.), use steel fixing elements in...

  • Page 23: Flush Mounting

    Mechanical installation 2.2 19 flush mounting – classic bricks if you use the brick flush mounting box, follow the instructions included in the box. If you do not use the mounting box, follow the instructions below: 1. Make a hole using the template. Suppose that all the required cables have been ca...

  • Page 24: Flush Mounting

    Mechanical installation 2.2 20 flush mounting – thermally insulated wall cut out the thermal insulation layer using the template (the same as for classic brick wall). Caution the hole depth depends on the insulation layer thickness. If the insulation layer is rather thick, you may need longer screws...

  • Page 25: Flush Mounting

    Mechanical installation 2.2 21 flush mounting – hollow bricks suppose you intend to install your 2n ® helios ip safety unit into a wall made of hollow bricks. Note that the external side of the bricks gets damaged by cutting and the dowels cannot practically be fixed into the thin internal part of t...

  • Page 26: Use Of Cable Bushings

    Mechanical installation 2.2 22 use of cable bushings the cable bushings included in the 2n ® helios ip safety delivery are designed for the following cables: big bushing: for two cables of the diameter of 5–6 mm (utp cable), or, upon insert replacement, for one thick cable/tube of the diameter of up...

  • Page 27: Pcb Connectors

    Electric installation 2.3 23 2.3 electric installation this subsection describes how to connect 2n ® helios ip safety into your local area network (lan) and how to connect supply voltage and the electric lock. Pcb connectors fig. 2.11 shows the lay-out of connectors on the 2n ® helios ip safety prin...

  • Page 28: Lan Connection

    Electric installation 2.3 24 description of connectors x1 loudspeaker x4 camera module x5 button 1 sw1 reset button (555v3 version only) x6 configuration jumpers x8 extending module (rfid card reader or additional switch) x10 buttons 1 through 4 x11 lan x12 servicing connector x13 keypad module x15 ...

  • Page 29: Electric Lock Connection

    Electric installation 2.3 25 electric lock connection 2n ® helios ip safety is equipped with an electrically isolated relay switch with no and nc contacts (terminal block x17) and 12v/700ma switched output (terminal block x18), to which a standard electric lock or another compatible electrical appli...

  • Page 30: Mounting Completion

    Electric installation 2.3 26 table 2.1 configuration jumpers x6 mounting completion 1. Having connected all the wires, make sure that the bushings, if used, are tightened properly and the rj-45 connector is inserted in the pcb connector. 2. Connect the pushbutton cable (to x5) and place the front co...

  • Page 31: Function and

    27 3 3. Function and use in this section we describe the basic and extending functions of the 2n ® helios ip safety product. Here is what you can find in this section: configuration maintenance.

  • Page 32: 3.1  2N

    2n® helios ip safety configuration 3.1 28 3.1 2n ® helios ip safety configuration use a pc equipped with any web browser to configure 2n ® helios ip safety: launch your web browser (internet explorer, firefox, etc.). Enter the ip address of your intercom ( http://192.168.1.100/ , e.G.). Log in using...

  • Page 33: 3.2  Maintenance

    Maintenance 3.2 29 3.2 maintenance cleaning if used frequently, 2n ® helios ip safety gets dirty. To clean it, use a piece of soft cloth moistened with clean water. We recommend you to obey the following principles while cleaning: never use aggressive detergents (such as abrasives or strong disinfec...

  • Page 35: Technical

    31 4 4. Technical parameters in this section we describe the technical parameters of the 2n ® helios ip safety product..

  • Page 36: 4.1  Technical Parameters

    Technical parameters 4.1 32 4.1 technical parameters signalling protocol sip buttons button design industrial waterproof, stainless steel, vandal resistant pushbutton, blue backlit count of buttons 1 (2 on request) numerical keypad (on request) audio microphone 2 integrated microphones amplifier 10w...

  • Page 37

    Technical parameters 4.1 33 declaration of conformity 2n telekomunikace a.S. Hereby declares that this product complies with all basic requirements and other relevant provisions of the 1999/5/ec directive. For the full wording of the declaration of conformity see www.2n.Cz . Industry canada this cla...

  • Page 39: Supplementary

    35 5 5. Supplementary information this section provides supplementary information on the 2n ® helios ip safety product. Here is what you can find in this section: applicable directives, laws and regulations.

  • Page 40

    Directives, laws and regulations 5.1 36 5.1 directives, laws and regulations 2n ® helios ip safety conforms to the following directives and regulations: directive 1999/5/ec of the european parliament and of the council, of 9 march 1999 – on radio equipment and telecommunications terminal equipment a...

  • Page 41: 5.2  Troubleshooting

    Troubleshooting 5.2 37 5.2 troubleshooting for tips concerning solutions of other potential problems see faq.2n.Cz ..

  • Page 42

    General instructions and cautions 5.3 38 5.3 general instructions and cautions please read this user manual carefully before using the product. Follow all instructions and recommendations included herein. Any use of the product that is in contradiction with the instructions provided herein may resul...

  • Page 43

    General instructions and cautions 5.3 39 electric waste and used battery pack handling do not place used electric devices and battery packs into municipal waste containers. An undue disposal thereof might impair the environment! Deliver your expired electric appliances and battery packs removed from...

  • Page 44

    2n telekomunikace a.S. Modřanská 621, 143 01 prague 4, czech republic tel.: +420 261 301 500, fax: +420 261 301 599 e-mail: sales@2n.Cz web: www.2n.Cz 1788.