- DL manuals
- 2N
- Speaker System
- Helios IP
- Configuration Manual
2N Helios IP Configuration Manual
Summary of Helios IP
Page 1
Www.2n.Cz version firmware 2n ® helios ip ip intercom configuration manual 2.7 2.7.
Page 2: Content
The 2n telekomunikace a.S. Is a czech manufacturer and supplier of telecommunications equipment. The product family developed by 2n telekomunikace a.S. Includes gsm gateways, private branch exchanges (pbx), and door and lift communicators. 2n telekomunikace a.S. Has been ranked among the czech top c...
Page 3: Content
Content 1. Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Express wizard for basic settings . . . . . . . . . . . . . . . . . . . . 6 3. Model differences and function licensing . . . . . . . . . . . . . 11 4. Signalling of operational statuses . . . . . . ...
Page 4: 1. Product Overview
4 2n telekomunikace a.S., www.2n.Cz ® 1. Product overview the door intercoms can smartly replace traditional doorbell 2n helios ip ® push-button speakerphone panels and all wiring, bells and home intercom installations in buildings with structured cabling. The intercoms provide more advanced and wid...
Page 5
5 2n telekomunikace a.S., www.2n.Cz ® safety abide by this information to prevent persons from injury. Always warning abide by this information to prevent damage to the device. Always caution important information for system functionality. Tip useful information for quick and efficient functionality...
Page 6: 2. Express Wizard For Basic
6 2n telekomunikace a.S., www.2n.Cz ® 2. Express wizard for basic settings lan connection setting you have to know the intercom configuration interface address to connect to the lan successfully. Automatic ip address retrieval from the dhcp server is set by default in the intercoms. Thus, if connect...
Page 7: Firmware Update
7 2n telekomunikace a.S., www.2n.Cz ® firmware update we also recommend you to update your intercom firmware upon the first login to the intercom. Refer to for the latest firmware version. Press the www.2n.Cz update button in the menu to upload firmware. The firmware system maintenance intercom will...
Page 8: Quick Dial Button Settings
8 2n telekomunikace a.S., www.2n.Cz ® – set the sip proxy ip address or domain name. Proxy address – set the sip registrar ip address or domain name. The sip registrar address proxy and sip registrar addresses are usually identical. – enable intercom registration with the set sip registrar. Registra...
Page 9
9 2n telekomunikace a.S., www.2n.Cz ® you can also use the intercom with one or more ip phones without a 2n helios ip ® sip server. Use the for outgoing calls and enter the called phone sip direct sip call address ( ) instead of the phone number. Sip:phone_number@phone_ip_address electric lock switc...
Page 10
10 2n telekomunikace a.S., www.2n.Cz ® enable the switch in the parameter in the switch enabled hardware switches tab, set the to the intercom output to which the electric switch 1 controlled output door lock is connected. Now set one or more activation codes for the electric door lock switching..
Page 11: 3. Model Differences and
11 2n telekomunikace a.S., www.2n.Cz ® 3. Model differences and function licensing this manual is valid for all members of the family and so some features 2n helios ip ® described herein are only available in selected models or need to be 2n helios ip ® activated with a valid licence key. This secti...
Page 12
12 2n telekomunikace a.S., www.2n.Cz ® property/model 2n helios ip ® verso vario force safety uni audio kit video kit basic unit button count 1 1, 3 or 6 1, 2 or 4 1 1 or 2 up to 16 external programmable buttons button extenders up to 145 up to 48 no numeric keypad optional no digital input yes opti...
Page 13
13 2n telekomunikace a.S., www.2n.Cz ® property/licence enhanced audio enhanced video enhanced integration enhanced security gold (profi) user sounds • • automatic audio test • • audio/video streaming (rtsp server) • • external ip camera support • • onvif support • • extended switch setting options ...
Page 14: 4. Signalling of Operational
14 2n telekomunikace a.S., www.2n.Cz ® 4. Signalling of operational statuses 2n helios ip ® generates sounds to signal switching and changes of operational statuses. Each status change is assigned a different type of tone. See the table below for the list of signals. Tone meaning user activated this...
Page 15
15 2n telekomunikace a.S., www.2n.Cz ® call prolongation confirmation signalling calls are time-limited in for security reasons 2n helios ip ® (protection against blocking). Refer to the miscellaneous . Subsection for details internal application launched the internal application is launched upon po...
Page 16: 5. Intercom Configuration
16 2n telekomunikace a.S., www.2n.Cz ® 5. Intercom configuration.
Page 17: Start Screen
17 2n telekomunikace a.S., www.2n.Cz ® start screen the start screen is an introductory overview screen displayed upon login to the intercom web interface. Use the back arrow xxx in the left-hand upper corner of the following web interface pages to return to this screen anytime. The screen header in...
Page 18
18 2n telekomunikace a.S., www.2n.Cz ® services phone – telephone and sip connection settings streaming – audio/video streaming settings (onvif, rtsp, multicast, etc.) e-mail – e-mail sending and smtp connection settings automation – flexible intercom settings according to the user's requirements us...
Page 19: 5.1 Status
19 2n telekomunikace a.S., www.2n.Cz ® 5.1 status the menu provides clear status and other essential information on the status intercom. The menu is divided into three tabs: , and . Device services licence device the tab displays basic information on the intercom model, its features, device firmware...
Page 21: 5.2 Directory
21 2n telekomunikace a.S., www.2n.Cz ® 5.2 directory here is what you can find in this subsection: 5.2.1 phone book 5.2.2 time profiles 5.2.3 access cards.
Page 22: 5.2.1 Phone Book
22 2n telekomunikace a.S., www.2n.Cz ® 5.2.1 phone book the phone book is one of the crucial parts of the intercom configuration. It contains user information relevant for such intercom functions as quick dialling, rfid card/code door unlocking, missed call e-mails and so on. The phone book is arran...
Page 23
23 2n telekomunikace a.S., www.2n.Cz ® the public user list. Then select the users to be accessible by quick dialling and copy their phone numbers to the lower phone book positions corresponding to the quick dial buttons. Refer to the menu for the phone book settings. Use the directory phone book na...
Page 24
24 2n telekomunikace a.S., www.2n.Cz ® you can assign up to three user phone numbers to each phone book position. In case the user is inaccessible on one number, the following number will be dialled after a ringing timeout. Enable the to enable dialling parallel call to following number multiple num...
Page 25
25 2n telekomunikace a.S., www.2n.Cz ® translation (nat) between the pc and intercom and the addresses have to comply with the router or another nat-executing device. The port1 (default value: 8003) parameter defines the destination port for the udp messages sent to . The port2 (default value: 80) p...
Page 27: 5.2.2 Time Profiles
27 2n telekomunikace a.S., www.2n.Cz ® 5.2.2 time profiles such intercom functions as outgoing calls and rfid card/numeric code access, for example, can be time-limited by being assigned a . By assigning a time time profile profile you can: block all calls to a selected user beyond the set time inte...
Page 28
28 2n telekomunikace a.S., www.2n.Cz ® list of parameters profile name – enter a profile name. This parameter is optional and helps you find items in the time profile list and select profiles in the switch, card and phone number settings more easily. This parameter helps you set time profiles within...
Page 29
29 2n telekomunikace a.S., www.2n.Cz ® profile activation code – set the profile activation code: 16 characters including digits 0–9 only. If the activation code is the only code defined or the activation and deactivation codes are identical, then the activation code is used both for profile activat...
Page 30: 5.2.3 Access Cards
30 2n telekomunikace a.S., www.2n.Cz ® 5.2.3 access cards each intercom user can be assigned one or more access rfid cards. Typically, the card id is included in the phone book together with such user data as phone numbers, e-mail address and so on. Or, you can define the rfid cards in the installed...
Page 31
31 2n telekomunikace a.S., www.2n.Cz ® the . Double-click to select the card id and push ctrl+c. Now that you have records the card id in your box, you can insert it with ctrl+v in any intercom setting field. Having been read, the card id is compared with the intercom card database. If the card id m...
Page 32
32 2n telekomunikace a.S., www.2n.Cz ® and helps you find the card list items more easily without affecting the intercom function. Records the tab displays the last 10 records on applied cards. Each record includes records the card tapping time, card id and type and description details (validity, ca...
Page 33: 5.3 Hardware
33 2n telekomunikace a.S., www.2n.Cz ® 5.3 hardware here is what you can find in this section: 5.3.1 switches 5.3.2 speaker 5.3.3 microphone 5.3.4 camera 5.3.5 keyboard 5.3.6 display 5.3.7 card reader 5.3.8 extenders.
Page 34: 5.3.1 Switches
34 2n telekomunikace a.S., www.2n.Cz ® 5.3.1 switches switches provide a very flexible and efficient control of such intercom peripherals as electric door locks, lighting, additional ringing signalling, and so on. Allo 2n helios ip ® ws you to configure up to 4 (depending on model types) independent...
Page 35
35 2n telekomunikace a.S., www.2n.Cz ® list of parameters switch enabled – enable/disable the switch globally. When disabled, the switch cannot be activated by any of the available codes (including user switch codes), by a call or quick dial button. Switch mode – set the monostable/bistable mode for...
Page 36
36 2n telekomunikace a.S., www.2n.Cz ® the table above includes a list of universal codes that help you activate switches from the phone or intercom keypad. Up to 10 universal codes can be defined for each switch (depending on the particular intercom model). Code – enter a numeric code for the switc...
Page 37
37 2n telekomunikace a.S., www.2n.Cz ® activation by quick dial button – assign a quick dial button to the switch. The switch is activated whenever the button is pressed. Sound signalling – set the sound signalling type for switch activation. Choose the short beep, long beep (during the whole activa...
Page 38
38 2n telekomunikace a.S., www.2n.Cz ® e.G.: http://192.168.1.50/relay1=off enable switch control by http – enable the http switch control option. Refer to the switch control by http details below. Legacy switch code – enable the option to activate the first-listed switch when this box is checked, c...
Page 39: 5.3.2 Speaker
39 2n telekomunikace a.S., www.2n.Cz ® 5.3.2 speaker all the models are equipped with a speaker or power amplifier output 2n helios ip ® to which an external loudspeaker can be connected. Set the phone call and state signalling volume control in this configuration section. The speaker volume setting...
Page 40
40 2n telekomunikace a.S., www.2n.Cz ® list of parameters master volume – set the master volume for the entire system. This setting affects the volume of phone calls and all signalling tones. Adaptive volume – enable the adaptive volume mode in which the speaker volume is adjusted automatically depe...
Page 41
41 2n telekomunikace a.S., www.2n.Cz ® audio agc enabled – enable the automatic gain control of the line signal. Audio volume – set the phone call volume. The volume values are relative against the set master volume. Ringtone volume – set the incoming call signal loudness. Call-progress tone volume ...
Page 42: 5.3.3 Microphone
42 2n telekomunikace a.S., www.2n.Cz ® 5.3.3 microphone set the microphone and line audio input volume parameters in this intercom configuration section. The microphone volume settings are closely associated with the speaker sensitivity parameters and intercom installation site conditions, which aff...
Page 43
43 2n telekomunikace a.S., www.2n.Cz ® default audio input – set the default audio input (microphone, line input or audio module input) for phone calls and audio streaming. Line input gain – set the line input gain independently of the microphone gain setting. Note this setting is available in the l...
Page 44: 5.3.4 Camera
44 2n telekomunikace a.S., www.2n.Cz ® 5.3.4 camera this menu is only available in the models that are equipped with an 2n helios ip ® internal camera or can be connected to an external camera. The camera signal can be streamed directly into the call via a videophone, sent by e-mail, streamed via on...
Page 45
45 2n telekomunikace a.S., www.2n.Cz ® of the ip phone keys in the ptz mode are as follows: ip phone key ptz mode function * enable/disable ptz 1 zoom in 3 zoom out 2 move cropped display up 4 move cropped display to the left 6 move cropped display to the right 8 move cropped display down 5 return t...
Page 46
46 2n telekomunikace a.S., www.2n.Cz ® current ir led brightness level - display the current ir led brightness level percentage. The level can be decreased below the set value so that automatically the maximum power consumption cannot be exceeded (typically, when multiple extenders are connected and...
Page 47: 5.3.5 Keyboard
47 2n telekomunikace a.S., www.2n.Cz ® 5.3.5 keyboard this configuration section helps you set the numeric keypad and quick dial button functions. Allows you to: 2n helios ip ® use the numeric keypad for dialling common phone numbers use the numeric keypad for dialling a phone book position use the ...
Page 48
48 2n telekomunikace a.S., www.2n.Cz ® you can only set the button that initiated the call. The following options are available: none – button pressing does not affect the call setup or active call. Hang up – button pressing terminates the call setup or active call. Dial the following – button press...
Page 49
49 2n telekomunikace a.S., www.2n.Cz ® backlight level – set the keypad and button backlight level. Keyboard mapping the and models are equipped 2n helios ip audio kit ® 2n helios ip video kit ® with eight terminals for up to 16 external buttons or a keypad. The functions can be set for each button ...
Page 50: 5.3.6 Display
50 2n telekomunikace a.S., www.2n.Cz ® 5.3.6 display some models are equipped with a colour display. Configure the 2n helios ip vario ® display exclusively via the . In this menu, you can only switch 2n helios ip manager ® the display on/off and set a few parameters. List of parameters display enabl...
Page 51
51 2n telekomunikace a.S., www.2n.Cz ® incidence)..
Page 52: 5.3.7 Card Reader
52 2n telekomunikace a.S., www.2n.Cz ® 5.3.7 card reader this menu is available in the and models 2n helios ip vario ® 2n helios ip force ® only. Configure the card reader in the menu. 2n helios ip verso ® extenders the card reader helps you control access to your building effectively using contactl...
Page 53
53 2n telekomunikace a.S., www.2n.Cz ® card reader enabled – enable the card reader function. If disabled, the card reader ignores all applied cards. If the card is disabled and the wiegand interface is out, all codes of the used cards are resent to the wiegand interface. Associated switch – select ...
Page 54: 5.3.8 Extenders
54 2n telekomunikace a.S., www.2n.Cz ® 5.3.8 extenders the intercoms can be enhanced with extending modules 2n helios ip verso ® connected to the intercom basic unit. The following modules are available: five-button module keypad module infopanel module card reader module i/o module wiegand module t...
Page 55
55 2n telekomunikace a.S., www.2n.Cz ® brightness during day - set the led brightness percentage value for the day mode. Brightness during night - set the led brightness percentage value for the night mode . Current brightness - display the current led brightness value automatically selected accordi...
Page 56
56 2n telekomunikace a.S., www.2n.Cz ® basic unit module configuration output 1 maximum power - set the maximum load to be connected to the power output available on the basic unit. When he the output is active, t consumption of the other modules (backlight level, etc.) can be adjusted automatically...
Page 57
57 2n telekomunikace a.S., www.2n.Cz ® keypad module configuration no parameters are available to the public at present. Infopanel module configuration no parameters are available to the public at present..
Page 58
58 2n telekomunikace a.S., www.2n.Cz ® card reader module configuration associated switch – set the number of the switch to be activated by tapping of a valid rfid card . Forward to wiegand output - set a group of wiegand outputs to which all the received rfid card ids will be resent . I/o module co...
Page 59
59 2n telekomunikace a.S., www.2n.Cz ® intercom to the security system in your building, for example (to send ids of the rfid cards tapped on the rfid reader or codes received on any wiegand input). The wiegand module is also equipped with one logical input and one logical output, which can be contr...
Page 60: 5.4 Services
60 2n telekomunikace a.S., www.2n.Cz ® 5.4 services here is what you can find in this section: 5.4.1 phone 5.4.2 streaming 5.4.3 onvif 5.4.4 e-mail 5.4.5 automation 5.4.6 user sounds 5.4.7 web server 5.4.8 audio test.
Page 61: 5.4.1 Phone
61 2n telekomunikace a.S., www.2n.Cz ® 5.4.1 phone the phone service is one of the basic functions of the intercom: helps you establish connections with other ip network terminal equipment. The intercoms 2n helios ® support the extended sip and are compatible with and certified by the leading sip pb...
Page 62
62 2n telekomunikace a.S., www.2n.Cz ® explanation of ip telephony terms sip – is a phone call signalling transmission (session initiation protocol) protocol used in ip telephony. It is primarily used for setting up, terminating and forwarding calls between two sip devices (the intercom and another ...
Page 63
63 2n telekomunikace a.S., www.2n.Cz ® phone, in the login window and web interface start page. Phone number (id) – set the intercom phone number (or another unique id including characters and digits). Together with the domain, this number represents a unique intercom identification in calls and reg...
Page 64
64 2n telekomunikace a.S., www.2n.Cz ® sip transport protocol – set the sip communication protocol: udp (default), tcp or tls. Trusted certificate – specify one of the three sets of certificates issued by certification authorities to verify the sip server public certificate validity, refer to the ce...
Page 65
65 2n telekomunikace a.S., www.2n.Cz ® calls automatic answer – enable automatic answering of incoming calls. If this function is disabled, the intercom signals incoming calls by ringing and the user can answer them by pushing the * button on the numeric keypad. Call activation – select automatic or...
Page 66
66 2n telekomunikace a.S., www.2n.Cz ® audio codec 1–4 – set the order of audio codecs for call setup: g.711 (pcma or pcmu), l16 or g.729. The order defines the codec priority, i.E. The first codec has the highest priority. Codec g.729 is available in selected intercoms only with a valid licence g.7...
Page 67
67 2n telekomunikace a.S., www.2n.Cz ® in-band (audio) – enable classic dtmf dual tone receiving in the audio band. Rtp (rfc-2833) – enable dtmf receiving via the rtp according to rfc-2833. Sip info (rfc-2976) – enable dtmf receiving via sip info messages according to rfc-2976. Qos dscp value – set ...
Page 68
68 2n telekomunikace a.S., www.2n.Cz ® video resolution – set the video resolution for phone calls. Video framerate – set the video frame rate for phone calls. Video bitrate – set the video stream bit rate for phone calls. Qos dscp value – set the video rtp packet priority in the network. The set va...
Page 69
69 2n telekomunikace a.S., www.2n.Cz ® (packetisation mode 2). Set a value from the range of 96 through 127, or 0 to disable this codec type. H.263+ payload type – set the payload type for video codec h.263+ (packetisation mode 3). Set a value from the range of 96 through 127. Polycom compatibility ...
Page 70: 5.4.2 Streaming
70 2n telekomunikace a.S., www.2n.Cz ® 5.4.2 streaming the intercoms provide several audio/video streaming methods; refer to 2n helios ip ® the table below: transmission method description jpeg/http static jpeg image transmission. Refer to the jpeg tab below. Mjpeg/http a series of consecutive jpeg ...
Page 71
71 2n telekomunikace a.S., www.2n.Cz ® explanation of terms rtp (real-time transport protocol) – is a protocol defining the standard packet format for audio/video transmission via ip networks. Employs 2n helios ip ® this protocol for audio/video streaming. The rtp transport protocol is either udp or...
Page 72
72 2n telekomunikace a.S., www.2n.Cz ® a. B. C. Set the video stream (video codec type, image resolution, frame rate and bit rate) parameters in the section. Video or, use the following rtsp uri and choose a codec type other than the currently set one: rtsp://ip_intercom_address/h264_stream rtsp://i...
Page 73
73 2n telekomunikace a.S., www.2n.Cz ® video resolution – set the default image resolution for rtsp streaming. Video framerate – set the default video frame rate for rtsp streaming. Video bitrate – set the default video bit rate for rtsp streaming. Video quality - set the video compression level (fo...
Page 74
74 2n telekomunikace a.S., www.2n.Cz ® http://intercom_ip_address/enu/camera x .Jpg w h or (for mjpeg, http server push): http://intercom_ip_address/enu/camera x .Jpg?Fps= w h n where and specify image resolution (supported resolutions: 160x120, 320x240, w h 640x480, 176x144, 322x272, 352x288, 1280x...
Page 75
75 2n telekomunikace a.S., www.2n.Cz ® multicast receiver enabled – enable receiving of rtp packets on the selected multicast address and port. The audio stream received is played during an active call too and the sounds from the two sources get mixed. Receive address – set the multicast ip address ...
Page 76
76 2n telekomunikace a.S., www.2n.Cz ® the intercom supports registration with up to 4 informacast servers at the same time and setup of up to 6 parallel audio streams. Informacast service enabled - enable the informacast service on your intercom side. Broadcast enabled - enable the broadcast comman...
Page 77: 5.4.3 Onvif
77 2n telekomunikace a.S., www.2n.Cz ® 5.4.3 onvif list of parameters the intercoms are onvif compatible and fully implement the onvif 2n helios ip ® profile s. Discovery mode – enable the ws-discovery function, which allows the other onvif clients to search a compatible device in the lan. Set the p...
Page 78
78 2n telekomunikace a.S., www.2n.Cz ® note preset authorisation for onvif username: admin password: 2n.
Page 79: 5.4.4 E-Mail
79 2n telekomunikace a.S., www.2n.Cz ® 5.4.4 e-mail to inform the intercom users on all missed and/or successfully completed calls, configure to send an e-mail after every call to the called user. You can 2n helios ip ® compile the e-mail subject and message text of your own. If your intercom is equ...
Page 80
80 2n telekomunikace a.S., www.2n.Cz ® server address – set the smtp server address to which e-mails shall be sent. Server port – specify the smtp server port. Modify the value only if the smtp server setting is substandard. The typical smtp port value is 25. Username – enter a valid username for lo...
Page 81
81 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. The following options are available: sent when the connection is terminated. Any outgoing call - an e-mail will be sent upon every outgoing call. Missed outgoing call - an e-mail will be sent upon every missed outgoing call. Via automation - no e-ma...
Page 82
82 2n telekomunikace a.S., www.2n.Cz ® attach snapshots – enable sending of an attachment including one or more camera snapshots taken during ringing or calling. Number of snapshots – set the count of snapshots to be attached to the e-mail message. Snapshot resolution – set the snapshot resolution f...
Page 83: 5.4.5 Automation
83 2n telekomunikace a.S., www.2n.Cz ® 5.4.5 automation the intercom provides highly flexible setting options to satisfy variable 2n helios ip ® user needs. There are situations in which the standard configuration settings (switch or call modes, e.G.) are insufficient and so offers 2n helios ip ® 2n...
Page 84: 5.4.6 User Sounds
84 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. E. F. 5.4.6 user sounds the intercoms provide standard signalling of operational statuses by 2n helios ip ® tone sequences; refer to the signalling of operational statuses subsection. If you find the standard sound signalling inconvenient, modify th...
Page 85
85 2n telekomunikace a.S., www.2n.Cz ® list of parameters ringing before answering call – set the sound to be played before answering an incoming call (intercom ring tone). Call busy tone – set the sound to be played when the called user is busy. Call hang-up signalling – set the sound to be played ...
Page 86
86 2n telekomunikace a.S., www.2n.Cz ®.
Page 87: 5.4.7 Web Server
87 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. 5.4.7 web server you can configure your intercom using a standard browser which 2n helios ip ® accesses the integrated web server. Use the secured https protocol for communication between the browser and intercom. Having accessed the intercom, enter...
Page 88
88 2n telekomunikace a.S., www.2n.Cz ® http port – set the web server port for http communication. The port setting will not be applied until the intercom gets restarted. Https port – set the web server port for https communication. The port setting will not be applied until the intercom gets restar...
Page 89: 5.4.8 Audio Test
89 2n telekomunikace a.S., www.2n.Cz ® 5.4.8 audio test the intercoms allow you to perform periodical tests of the integrated 2n helios ip ® speaker and microphone. For the test purpose, the integrated speaker generates one or more short beeps. The integrated microphone receives the generated tone a...
Page 90
90 2n telekomunikace a.S., www.2n.Cz ® test period – set the test period: daily or weekly. Test start time – set the test starting time in the hh:mm format. We recommend you to set a time at which a low intercom traffic is expected. Test now – push the button to start the test immediately regardless...
Page 91: 5.5 System
91 2n telekomunikace a.S., www.2n.Cz ® 5.5 system here is what you can find in this section: 5.5.1 network 5.5.2 date and time 5.5.3 licence 5.5.4 certificates 5.5.5 auto provisioning 5.5.6 syslog 5.5.7 maintenance.
Page 92: 5.5.1 Network
92 2n telekomunikace a.S., www.2n.Cz ® 5.5.1 network as the intercom is connected to the lan, make sure that its ip address 2n helios ip ® has been set correctly or obtained from the lan dhcp server. Configure the ip address and dhcp in the subsection. Network if you use the radius server and 802.1x...
Page 93
93 2n telekomunikace a.S., www.2n.Cz ® static ip address – static ip address of the intercom, which is used together with the below mentioned parameters if the parameter is use dhcp server disabled. Network mask – network mask. Default gateway – address of the default gateway, which provides communi...
Page 94
94 2n telekomunikace a.S., www.2n.Cz ® md5 authentication enabled – enable authentication of network devices via the 802.1x eap-md5 protocol. Do not enable this function if your lan does not support 802.1x. If you do so, the intercom will become inaccessible. Password – enter the access password for...
Page 95
95 2n telekomunikace a.S., www.2n.Cz ®.
Page 96: 5.5.2 Date and Time
96 2n telekomunikace a.S., www.2n.Cz ® 5.5.2 date and time if you control validity of phone numbers, lock activation codes and similar by time profiles, make sure that the intercom internal date and time are set correctly. Most models are equipped with a back-up real-time clock to withstand 2n helio...
Page 97
97 2n telekomunikace a.S., www.2n.Cz ® synchronise – push the button to synchronise the intercom time value with your pc time value. Time zone – set the time zone for the installation site to define time shifts and winter/summer time transitions. Time zone rule – if the intercom is installed on a si...
Page 98: 5.5.3 Licence
98 2n telekomunikace a.S., www.2n.Cz ® 5.5.3 licence some functions are available with a valid licence key only. Refer to the 2n helios ip ® subsection for the list of intercom model differences and function licensing licensing options. List of parameters licence key – enter the valid licence key. L...
Page 99
99 2n telekomunikace a.S., www.2n.Cz ® security licence are available. Enhanced audio – check whether the functions activated by the enhanced audio licence are available. Enhanced video – check whether the functions activated by the enhanced video licence are available. Enhanced integration – check ...
Page 100: 5.5.4 Certificates
100 2n telekomunikace a.S., www.2n.Cz ® a. B. C. D. 5.5.4 certificates some network services use the transaction layer security (tls) 2n helios ip ® protocol for communication with other lan devices to prevent third parties from monitoring and/or modifying the communication contents. Unilateral or b...
Page 101
101 2n telekomunikace a.S., www.2n.Cz ® press to load a certificate saved on your pc. Select the certificate (or private key) file in the dialogue window and push . Press to remove a certificate from the load intercom..
Page 102: 5.5.5 Auto Provisioning
102 2n telekomunikace a.S., www.2n.Cz ® a. B. C. A. B. C. D. E. F. G. 5.5.5 auto provisioning the intercoms help you update firmware and configuration manually, 2n helios ip ® or automatically from a storage on a tftp/http server selected by you according to predefined rules. You can configure the t...
Page 103
103 2n telekomunikace a.S., www.2n.Cz ® 2n helios ip vario ® with mac address 00-87-12-aa-00-11 downloads the following files from the tftp server: hipv-firmware.Bin hipv-common.Xml hipv-00-87-12-aa-00-11.Xml configuration use the tab to set automatic configuration download from the server configura...
Page 104
104 2n telekomunikace a.S., www.2n.Cz ® at boot time – enable check and, if possible, update execution upon every intercom start. Update period – set the update period: hourly, daily, weekly and monthly. Update at – set the update time in the hh:mm format for periodical updating at a low-traffic tim...
Page 105
105 2n telekomunikace a.S., www.2n.Cz ® result description pending... Update in progress update succeeded the configuration/firmware update has been successful. With firmware update, the device will be restarted in a few seconds. Firmware is up to date a firmware update attempt reveals that the late...
Page 106: 5.5.6 Syslog
106 2n telekomunikace a.S., www.2n.Cz ® 5.5.6 syslog the intercoms allow you to send system messages to the syslog server 2n helios ip ® including relevant information on the device states and processes for recording, analysis and audit. It is unncecessary to configure this service for common interc...
Page 107: 5.5.7 Maintenance
107 2n telekomunikace a.S., www.2n.Cz ® 5.5.7 maintenance use this menu to maintain your intercom configuration and firmware. You can back up and reset all parameters, update firmware and/or reset default settings here. Back up configuration – back up the complete current configuration of your inter...
Page 108
108 2n telekomunikace a.S., www.2n.Cz ® the intercom has obtained the ip address upon restart, the login window will get displayed automatically..
Page 109: 6. Supplementary Information
109 2n telekomunikace a.S., www.2n.Cz ® 6. Supplementary information zde je přehled toho, co v kapitole naleznete: 6.1 troubleshooting 6.2 directives, laws and regulations 6.3 general instructions and cautions.
Page 110: 6.1 Troubleshooting
110 2n telekomunikace a.S., www.2n.Cz ® 6.1 troubleshooting for the most frequently asked questions refer to . Faq.2n.Cz.
Page 111: Europe
111 2n telekomunikace a.S., www.2n.Cz ® 6.2 directives, laws and regulations europe 2n helios ip ® conforms to the following directives and regulations: directive 1999/5/ec of the european parliament and of the council, of 9 march 1999 – on radio equipment and telecommunications terminal equipment a...
Page 112: Fcc
112 2n telekomunikace a.S., www.2n.Cz ® fcc note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installati...
Page 113
113 2n telekomunikace a.S., www.2n.Cz ® 6.3 general instructions and cautions please read this user manual carefully before using the product. Follow all instructions and recommendations included herein. Any use of the product that is in contradiction with the instructions provided herein may result...
Page 114
114 2n telekomunikace a.S., www.2n.Cz ® electric waste and used battery pack handling do not place used electric devices and battery packs into municipal waste containers. An undue disposal thereof might impair the environment! Deliver your expired electric appliances and battery packs removed from ...
Page 115
115 2n telekomunikace a.S., www.2n.Cz ® 2n telekomunikace a.S. Modřanská 621, 143 01 prague 4, czech republic phone: +420 261 301 500, fax: +420 261 301 599 e-mail: sales@2n.Cz web: www.2n.Cz 1759v2.