3Com CoreBuilder 2500 User Manual - page 133
Administering UDP Helper
10-17
Setting the BOOTP
Hop Count Limit
You can set the maximum
hop count
, that is, the maximum number of
times that packets will be forwarded within the router. The range is
0
through
16
hops.
Default
The default hop count setting is
4
.
To set the hop count limit:
1
From the top level of the Administration Console, enter:
ip udpHelper hopCountLimit
2
Enter the BOOTP relay hop count limit.
Setting the BOOTP
Relay Threshold
You can set the maximum time limit for routing a packet. If you use
0
as
the value, the router does not process the value in the seconds field. If
you use a nonzero value, the router uses that value along with the hop
count value to determine whether to forward a UDP packet.
To set the BOOTP relay threshold:
1
From the top level of the Administration Console, enter:
ip udpHelper threshold
2
Enter the BOOTP relay threshold.
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧
ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
atmArpServer
multicast
➧
udpHelper
routing
icmpRouterDiscovery
ospf
rip
ping
statistics
display
define
remove
➧
hopCountLimit
threshold
interface
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧
ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
atmArpServer
multicast
➧
udpHelper
routing
icmpRouterDiscovery
ospf
rip
ping
statistics
display
define
remove
hopCountLimit
➧
threshold
interface