3Com CoreBuilder 2500 User Manual - page 182
13-14
C
HAPTER
13: A
DMINISTERING
OSPF R
OUTING
Setting
Dead Intervals
The value of the dead interval determines how long neighbor routers wait
for a hello packet before they determine that the transmitting router is
inactive. Each time a router receives a hello packet from a neighbor, the
router resets the dead interval timer for that neighbor. See “Setting
Hello Timers” on page 13-13 for more information.
CAUTION:
Set the dead interval to the same value for all routers on the
network segment.
Default
The default value for the dead interval is
40
seconds.
To set the value of the dead interval:
1
From the top level of the Administration Console, enter:
ip ospf interface dead
2
Enter an IP interface.
3
Enter the value of the dead interval, in seconds.
Allowable values:
1
through
65535
.
Setting Passwords
Use this command to set a security password for a specific OSPF
interface.
CAUTION:
Use the same password for all routers on the network
segment because they are in the same area.
Default
The default is no password.
To enter an IP interface password:
1
From the top level of the Administration Console, enter:
ip ospf interface password
2
Enter an IP interface.
3
Enter the password.
You can use up to eight ASCII characters.
Example:
Select interface(s) (1-2|all): 2
Enter interface password [none]: xyzzy
Use the password
none
to remove a previously assigned password.
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧
ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧
ospf
rip
ping
statistics
areas
defaultRouteMetric
➧
interface
linkStateData
neighbors
routerID
partition
stubDefaultMetric
virtualLinks
statistics
summary
detail
statistics
mode
priority
areaID
cost
delay
hello
retransmit
➧
dead
password
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧
ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧
ospf
rip
ping
statistics
areas
defaultRouteMetric
➧
interface
linkStateData
neighbors
routerID
partition
stubDefaultMetric
virtualLinks
statistics
summary
detail
statistics
mode
priority
areaID
cost
delay
hello
retransmit
dead
➧
password