3Com CoreBuilder 2500 User Manual - page 150
11-6
C
HAPTER
11: A
DMINISTERING
IP M
ULTICAST
R
OUTING
Defining a Multicast
Tunnel
To define a multicast tunnel:
1
From the top level of the Administration Console, enter:
ip multicast tunnel define
2
Enter the index numbers of the interfaces that you want to associate with
a multicast tunnel.
3
Enter the IP address of the destination multicast router.
The IP address of the destination multicast router must be a remote
address. The destination router cannot be directly connected to the same
subnetworks as the local IP address.
4
Enter the DVMRP metric value of the tunnel.
5
Enter the Time To Live (TTL) threshold of the tunnel.
6
Enter the rate limit of the tunnel.
Example:
Enter an IP interface index [1]: 2
Enter remote IP address: 192.9.200.40
Enter tunnel DVMRP metric [1]: 1
Enter tunnel TTL threshold [1]:
Enter tunnel rate limit [0]:
Removing a
Multicast Tunnel
To remove an IP multicast tunnel:
1
From the top level of the Administration Console, enter:
ip multicast tunnel remove
2
Enter the index numbers of the interfaces that are associated with the
tunnel that you want to remove.
Enter multicast tunnel index [1]: 1
The tunnel is removed.
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧
ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
atmArpServer
➧
multicast
udpHelper
routing
icmpRouterDiscovery
rip
ping
statistics
dvmrp
igmp
interface
➧
tunnel
routeDisplay
cacheDisplay
display
➧
define
remove
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧
ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
atmArpServer
➧
multicast
udpHelper
icmpRouterDiscovery
rip
ping
statistics
dvmrp
igmp
interface
➧
tunnel
routeDisplay
cacheDisplay
display
define
➧
remove