3Com CoreBuilder 2500 User Manual - page 175
Configuring OSPF Interfaces
13-7
Displaying OSPF
Interface Information
The OSPF interface summary and detail displays contain information
about the system’s OSPF interface configuration.
To display OSPF interface configuration information, from the top level of
the Administration Console, enter:
ip ospf interface summary
OR
ip ospf interface detail
The following sample shows an OSPF interface summary:
The following sample shows an OSPF interface detail:
Table 13-2 lists the fields for the OSPF displays.
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧
ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
multicast
udphelper
routing
icmpRouterDiscovery
➧
ospf
rip
ping
statistics
areas
defaultRouteMetric
➧
interface
linkStateData
neighbors
routerID
partition
stubDefaultMetric
virtualLinks
statistics
➧
summary
➧
detail
statistics
mode
priority
areaID
cost
delay
hello
retransmit
dead
password
OSPF interface summary information
Xmit Xmit Hello Rxmit Dead
Indx Pri AreaID Cost Delay Intvl Intvl Intvl Password
1 1 0.0.0.0 1 1 10 5 40 No Password
2 1 158.101.0.0 1 1 10 5 40 No Password
OSPF interface detail information
Indx IP Address State DR BDR Notes
1 158.101.112.113 Off 0.0.0.0 0.0.0.0
2 158.101.142.1 BDR 158.101.142.254 158.101.142.1 RouterID
Table 13-2
Field Attributes for the OSPF Interface Displays
Field
Description
Indx
Interface entry index, which corresponds to the IP interface index
Pri
OSPF router priority for the interface
Area ID
OSPF area to which the interface belongs
Xmit Cost
Interface transmit cost
Xmit Delay
Interface transmit delay
Hello Intvl
OSPF hello packet transmit interval for the interface
Rxmit Intvl
LSA retransmit interval
Dead Intvl
Time interval before OSPF declares that a neighbor is dead
(continued)