3D Systems ProX DMP320 User Manual - page 46
46
3D SYSTEMS, INC
.
Status
This window gives an overview of the Machine status reports
Maintenance Tasks
Time
remaining: How much time until the maintenance task is due .
Status:
Overdue maintenance tasks
Maintenance tasks in the near future
Maintenance tasks in the further future
Operator:
Maintenance ->
Must be performed by 3d Systems certified maintenance personnel
Production
->
Must be performed by production operator
Description: Short description about the maintenance task
Info link: Opens up the applicable work instruction for the maintenance task .
Perform task:
Press button when maintenance task has been completed .
Message
:
Is a simple notepad-like tool that can be used for noting down reminders or communicating remarks to other operators of the same
printer . This messages will be stored even when DMP deposition is closed .