3D Systems ProX DMP320 User Manual - page 50
of
83
50
3D SYSTEMS, INC
.
Shutting Printer Down
Anytime the Build Module is removed from the printer, the printer should be shut down first. Follow these steps to shut down printer:
2 . Shut down the PC the same way any PC is shut down, select
Shut Down
(2) under Start .
3 . Turn off the
24 Volts
(3) .
4 . Turn off the
Main Power
(4) .
2
CAUTION: Do not turn off the 24 Volts before
shutting down DMP deposition .
CAUTION: Do not turn off the main power before
shutting down the computer .
3
4
1
1 . Close
DMP Control
and
DMP Deposition
by clicking the
boxes for all two windows in the upper right corner (1) .