3D Systems ProX DMP320 User Manual - page 49
of
83
49
3D SYSTEMS, INC
.
Powering Up ProX DMP 320
7 . Start
DMP Deposition
(7) and
DMP Control
(8) .
8 . The printer is now ready to be used .
8
7
1 . Make sure printer is plugged in to the facility power .
2 . Turn on the main power switch .
3 . Turn on the main power switch, 24VDC .
4 . Make sure the emergency stop located on the front of the machine
is not engaged
5 . Press the “reset emergency stop.”
6 . Press the “pc on” button to turn the pc on.
3
2
5
6
6
SYSTEM USE