3D Systems ProX DMP320 User Manual - page 74
of
83
74
3D SYSTEMS, INC
.
Door Seal
Door seals may get damaged over time from opening and
closing .
Periodically inspect door seals and if door seals
are damaged, follow this procedure to replace them .
Door Seal Removal and Replace
Tools:
•
Sharp knife
•
Super glue
•
Rubber hammer
•
Small flat screwdriver
•
Rubber seal 12mm
1 . Remove the old seal from the door using the flat screwdriver to
remove it easily .
2 . Feed a new seal in the groove . You may need to gently tap with a
rubber hammer to force it in place .
3 . Cut the ends of the seal straight and glue together with super glue .
Be careful not to use too much glue, this will make the rubber hard .