3xLogic VSX-1.3MP-PIR1 User Manual - page 28
User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
28
a. Pan the camera to the right or left.
b. Tilt the camera up or down.
c. Zoom in or out.
d. Refocus the lens.
3) Click
to finish the setting of the current preset.
4) You can click
to delete the preset.
Note:
You can configure up to 128 presets.
Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or when an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
to call the preset.
Or you can place the mouse on the presets interface, and call the preset by typing the preset No. to call the
corresponding presets.
Figure 5-‐5
Calling a Preset