3xLogic VSX-1.3MP-PIR1 User Manual - page 75
User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
75
10.4 IP Address Filter
Purpose:
This function makes it possible for access control.
Steps:
1) Enter the IP Address Filter interface:
Configuration> Advanced Configuration> Security > IP Address Filter
Figure 10-‐7
IP Address Filter Interface
2) Check the checkbox of Enable IP Address Filter.
3) Select the type of IP Address Filter in the drop-‐down list, Forbidden and Allowed are selectable.
4) Set the IP Address Filter list.
Add an IP Address
Steps:
1) Click the Add to add an IP.
2) Input the IP Address.
Figure 10-‐8 Add an IP
3) Click the OK to finish adding.
Modify an IP Address
Steps:
1) Left-‐click an IP address from filter list and click Modify.
2) Modify the IP address in the text filed.