3xLogic VSX-1.3MP-PIR1 User Manual - page 78
User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
78
Or Configuration > Advanced Configuration> System > Maintenance
2) Click Browse to select the local upgrade file and then click Upgrade to start remote upgrade.
Note:
The upgrading process will take 1 to 10 minutes. Please don't disconnect power of the
camera during the process. The camera reboots automatically after upgrading.
Figure 10-‐12
Figure Remote Upgrade
10.7 RS-‐232 Settings
Purpose:
The RS-‐232 port can be used in two ways:
1) Parameters Configuration: Connect a computer to the camera through the serial port. Device
parameters can be configured by using software such as HyperTerminal. The serial port parameters
must be the same as the serial port parameters of the camera.
2) Transparent Channel: Connect a serial device directly to the camera. The serial device will be
controlled remotely by the computer through the network.
Steps:
1) Enter RS-‐232 Port Setting interface:
Configuration> Advanced Configuration> System > RS232
Figure 10-‐13
RS-‐232 Settings
Figure 10-‐14
Note:
If you want to connect the camera by the RS-‐232 port, the parameters of the RS-‐232 should
be exactly the same with the parameters you configured here.
2) Click Save to save the settings.