3xLogic VSX-1.3MP-PIR1 User Manual - page 30
User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
30
!
Record File Size: Select the packed size of the manually recorded and downloaded video
files to 256M, 512M or 1G. After the selection, the maximum record file size is the value
you selected.
!
Save record files to: Set the saving path for the manually recorded video files.
!
Save downloaded files to: Set the saving path for the downloaded video files in playback
mode.
!
Picture and Clip Settings: Set the saving paths of the captured pictures and clipped video files. Valid
for the pictures you captured with the web browser.
!
Save snapshots in live view to: Set the saving path of the manually captured pictures in
live view mode.
!
Save snapshots when playback to: Set the saving path of the captured pictures in playback
mode.
!
Save clips to: Set the saving path of the clipped video files in playback mode.
Note:
You can click Browse to change the directory for saving the clips and pictures.
3) Click Save to save the settings.
6.2 Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time synchronization and DST settings.
Steps:
1) Enter the Time Settings interface:
Configuration > Basic Configuration >System > Time Settings
Or Configuration > Advanced Configuration >System > Time Settings
Figure 6-‐2
Time Settings
2) Select the Time Zone.
Select the Time Zone of your location from the drop-‐down menu.
3) Synchronizing Time by NTP Server.
a. Check the checkbox to enable the NTP function.
b. Configure the following settings:
!
Server Address: IP address of NTP server.