3xLogic VSX-1.3MP-PIR1 User Manual - page 76
User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
76
Figure 10-‐9 Modify an IP
3) Click the OK to finish modifying.
Delete an IP Address
4) Left-‐click an IP address from filter list and click Delete.
Delete all IP Addresses
5) Click Clear to delete all the IP addrsses.
6) Click Save to save the settings.
10.5 Viewing Device Information
Enter the Device Information interface:
Configuration > Basic Configuration> System > Device Information Or Configuration > Advanced
Configuration> System > Device Information In the Device Information interface, you can edit the
Device Name.
Other information your network camera, such as Model, Serial No., Firmware Version, Encoding Version,
Number of Channels, Number of HDDs, Number of Alarm Input and Number of Alarm Output are displayed.
The information cannot be changed in this menu. It is the reference for maintenance or modification in the
future.
Figure 10-‐8
Device Information
10.6 Maintenance
REBOOTING THE CAMERA
Steps:
1) Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance Or Configuration >
Advanced Configuration> System > Maintenance:
2) Click Rebootto reboot the network camera.