1. DL manuals
  2. Anritsu
  3. Signal Processors
  4. MS2830A
  5. Operation Manual

Anritsu MS2830A Operation Manual

Manual is about: Signal Analyzer Spectrum Analyzer Function Remote Control

Summary of MS2830A

  • Page 1

    Document no.: m-w3336ae-34.0 anritsu corporation ● for safety and warning information, please read this manual before attempting to use the equipment. ● additional safety and warning information is provided within the ms2830a signal analyzer operation manual (mainframe operation)，ms2840a signal anal...

  • Page 2: Danger

    Ii safety symbols to prevent the risk of personal injury or loss related to equipment malfunction, anritsu corporation uses the following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of the symbols before using the equipment. Some or all of t...

  • Page 3

    Iii notes on export management this product and its manuals may require an export license/approval by the government of the product's country of origin for re-export from your country. Before re-exporting the product or manuals, please contact us to confirm whether they are export-controlled items o...

  • Page 4

    Iv.

  • Page 5: About This Manual

    I about this manual operation manual configuration the operation manual configuration of the ms2830a, ms2840a, and ms2850a signal analyzer is shown below. Ms2690a/ms2691a/ms2692a and ms2830a/ms2840a/ms2850a signal analyzer operation manual (phase noise measurement function operation) ms2690a/ms2691a...

  • Page 6

    Ii • signal analyzer operation manual (mainframe operation) • signal analyzer operation manual (mainframe remote control) description of basic operations, maintenance procedures, common functions and common remote functions of the mainframe • signal analyzer operation manual (signal analyzer functio...

  • Page 7: Table Of Contents

    1 index iii 2 3 4 5 6 7 9 appen di x 8 table of contents overview ........................................... 1-1 chapter 1 1.1 overview of spectrum analyzer ................................... 1-2 1.2 features of spectrum analyzer .................................... 1-3 chapter 2 basic operation ....

  • Page 8: Chapter 6

    Iv measure function ............................ 6-1 chapter 6 6.1 selecting measure function ......................................... 6-2 6.2 adjacent channel leakage power measurement (acp) ............................................................................ 6-4 6.3 burst average power me...

  • Page 9: Chapter 9

    1 index v 2 3 4 5 6 7 9 appen di x 8 noise floor reduction ..................... 9-1 chapter 9 9.1 overview of noise floor reduction .............................. 9-2 9.2 noise floor reduction .................................................. 9-3 9.3 acquiring noise floor calibration values .........

  • Page 10

    Vi..

  • Page 11

    1-1 1 o ve rvi ew overview chapter 1 this chapter provides an overview of the spectrum analyzer function. 1.1 overview of spectrum analyzer ................................... 1-2 1.2 features of spectrum analyzer .................................... 1-3.

  • Page 12

    Chapter 1 overview 1-2 1.1 overview of spectrum analyzer the ms2830a, ms2840a, ms2850a signal analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added. The spectrum analyzer function (hereinafter “this application”) enables high-s...

  • Page 13

    1.2 features of spectrum analyzer 1-3 1 o ver view 1.2 features of spectrum analyzer a spectrum analyzer is a measuring device for analyzing the frequency components of an input signal. The relative values of the various frequency components are displayed in graph form, with the horizontal axis repr...

  • Page 14

    Chapter 1 overview 1-4 the real-time method, which is characterized by a small time lag, is suitable for measurement in a narrow frequency range of several tens of mhz maximum. Compared to the real-time method, the sweep method requires a long time to draw a screen, but since it allows observation o...

  • Page 15

    1.2 features of spectrum analyzer 1-5 1 o ve rvi ew figure 1.2-3 shows the configuration of a typical sweep-type spectrum analyzer. The super heterodyne method, which is one of the methods that can be used for implementing a sweep-type spectrum analyzer, is described below. The input signal from ext...

  • Page 16

    Chapter 1 overview 1-6..

  • Page 17

    2-1 2 basic operation chapter 2 basic operation this chapter describes the basic operation of the spectrum analyzer function. 2.1 display description ....................................................... 2-2 2.2 single/continuous sweep ............................................. 2-4 2.3 setting ...

  • Page 18: 2.1 Display

    Chapter 2 basic operation 2-2 2.1 display description this section describes the main screen and main function menus of the spectrum analyzer function. Figure 2.1-1 main screen of spectrum analyzer function.

  • Page 19

    2.1 display description 2-3 2 basic operation pressing the when the spectrum analyzer function is selected in the application switch menu displays the main function menu. The main function menu consists of two pages, which can be toggled by pressing . Table 2.1-1 main function menu function key menu...

  • Page 20: 2.2 Single/continuous

    Chapter 2 basic operation 2-4 2.2 single/continuous sweep there are two types of sweep, single and continuous. (1) single sweep press to execute sweep once. When the trigger function or gate function is on, only 1 sweep is executed when the sweep start conditions are met. (2) continuous sweep press ...

  • Page 21: 2.3 Setting

    2.3 setting frequency 2-5 2 basic operation 2.3 setting frequency the spectrum analyzer function can set the following four measurement frequencies.  center frequency  frequency span  start frequency  stop frequency pressing (frequency) on page 1 of the main function menu, or pressing displays t...

  • Page 22

    Chapter 2 basic operation 2-6 frequency function menu table 2.3-1 frequency function menu function key menu display function page 1 frequency press frequency to display this menu. F1 center sets the center frequency. 2.3.1 “setting center frequency” f2 start sets the start frequency. 2.3.3 “setting ...

  • Page 23

    2.3 setting frequency 2-7 2 basic operation table 2.3-1 frequency function menu (cont’d) function key menu display function page 2 frequency press frequency, and then press to display this menu. F1 external mixer (on/off)* 1 turn on when using external mixer. This function is available with ms2830a-...

  • Page 24

    Chapter 2 basic operation 2-8 table 2.3-1 frequency function menu (cont’d) function key menu display function f8 micro wave preselector bypass (on/off) enables/disables the micro wave preselector bypass function. This function is available with ms2830a-007/067/167, ms2840a-067/167, ms2850a. Ms2830a ...

  • Page 25

    2.3 setting frequency 2-9 2 basic operation the display items related to the frequency parameters are described below. Figure 2.3-2 display items related to frequency parameters table 2.3-3 display items related to frequency parameters no. Display description [1] center or start displays the center ...

  • Page 26

    Chapter 2 basic operation 2-10 2.3.1 setting center frequency the center frequency of the frequency range to be swept can be set. Setting range and resolution for center frequency setting range: ms2830a-040: 100 mhz to 3.7 ghz* ms2830a-041: 100 mhz to 6.1 ghz* ms2830a-043: 100 mhz to 13.6 ghz* ms...

  • Page 27

    2.3 setting frequency 2-11 2 basic operation 2.3.2 setting frequency span the frequency span to be swept can be set. The mode when the frequency span is higher than 0 hz is called the frequency domain mode (horizontal axis = frequency), and if it is 0 hz, it is called the time domain mode (horizonta...

  • Page 28

    Chapter 2 basic operation 2-12 2.3.3 setting start frequency the start frequency of the frequency range to be swept can be set. Setting range and resolution for start frequency setting range: ms2830a-040: 100 mhz to 3.6999997 ghz* ms2830a-041: 100 mhz to 6.0999997 ghz* ms2830a-043: 100 mhz to 13....

  • Page 29

    2.3 setting frequency 2-13 2 basic operation example: to set the stop frequency to 1 ghz 1. Press . 2. Press (stop). 3. After pressing , press (ghz) to set the stop frequency..

  • Page 30

    Chapter 2 basic operation 2-14 2.3.5 setting frequency offset the offset value for the frequency display can be set. Setting range and resolution for frequency offset setting range: 100 ghz to 100 ghz resolution: 1 hz example: to set the frequency offset to 1 ghz 1. Press . 2. Press (offset value)....

  • Page 31: Frequency Domain Parameters

    2.3 setting frequency 2-15 2 basic operation 2.3.7 setting whether to couple time domain parameters and frequency domain parameters sets whether to couple the time domain parameters and frequency domain parameters. If coupling is enabled, the rbw, vbw, detection mode, and trace point are coupled (sh...

  • Page 32: 2.3.8 Switching Speed

    Chapter 2 basic operation 2-16 2.3.8 switching speed selects the normal or fast frequency switching speed. Table 2.3.8-1 switching speed switching speed descriptions fast tuning the operation is done so as to increase the frequency switching speed. (fast switching) normal the operation is done so as...

  • Page 33: 2.3.9  Setting Step Size

    2.3 setting frequency 2-17 2 basic operation 2.3.9 setting step size the step size of the center, start and stop frequency can be set. Setting range and resolution for step size setting range: ms2830a-040: 1 hz to 3.6 ghz ms2830a-041: 1 hz to 6.0 ghz ms2830a-043: 1 hz to 13.5 ghz ms2830a-044: 1 hz t...

  • Page 34: 2.3.10 Low Phase Noise

    Chapter 2 basic operation 2-18 2.3.10 low phase noise this function is available when ms2830a-062/066 or ms2840a-066/166 low phase noise performance function is installed. Low phase noise performance option summary: the ssb phase noise is improved for rf input signals by provision of an internal ded...

  • Page 35

    2.3 setting frequency 2-19 2 basic operation displaying "low phase noise icon" "low phase noise" is displayed when the low phase noise performance function is enabled at the conditions in table 2.3.10-1. ● for the setting method for low phase noise in system settings, refer to section 3.4.4 in the m...

  • Page 36

    Chapter 2 basic operation 2-20 "sg control" is displayed when ms2830a-052/152/352 internal signal generator control function is on. (displaying priority: [low phase noise] figure 2.3.10-1 low phase noise display this is displayed when low phase noise performance is enabled..

  • Page 37

    2.3 setting frequency 2-21 2 basic operation 2.3.11 displaying the spurious mode icon when “spurious” is selected for the frequency band mode, the spurious mode icon is displayed in the following condition: condition of displaying the icon * for ms2830a-040, ms2840a-040 not displayed * for ms2830a-0...

  • Page 38: 2.4 Setting

    Chapter 2 basic operation 2-22 2.4 setting level pressing (amplitude) on the main function menu, or pressing displays the amplitude function menu. Figure 2.4-1 amplitude key.

  • Page 39

    2.4 setting level 2-23 2 basic operation table 2.4-1 amplitude function menu for the amplitude function menu when f1 (external mixer) on page2 of the frequency function menu is set to on, refer to table 8.2-2. Function key menu display function page 1 amplitude press amplitude to display this menu. ...

  • Page 40

    Chapter 2 basic operation 2-24 table 2.4-1 amplitude function menu (cont’d) function key menu display function page 2 amplitude press amplitude, and then press to display this menu. F1 impedance sets 50 /75 of impedance. 2.4.7 “setting impedance” f5 noise floor reduction info. Displays the tempera...

  • Page 41

    2.4 setting level 2-25 2 basic operation the display items related to the level parameters are described below. Figure 2.4-2 display items related to level parameters table 2.4-2 display items related to level parameters no. Display description [1] reference level displays the reference level. [2] r...

  • Page 42

    Chapter 2 basic operation 2-26 the reference level (upper end of amplitude scale) range is described below. Setting range and resolution for reference level setting range: refer to table 2.4-3 and table 2.4-4. Resolution: 0.01 db (db unit system) effective number of digits: 3 (w unit) effective numb...

  • Page 43

    2.4 setting level 2-27 2 basic operation table 2.4-4 reference level setting range (when pre-amp is set to on) scale mode unit reference level range log scale dbm* 1 130 to +30 dbm db v* 2 23.01 to +136.99 dbv (impedance = 50 ) –21.25 to +138.75 db v (impedance = 75 ) dbmv* 3 83.01 to +76.99...

  • Page 44

    Chapter 2 basic operation 2-28 2.4.1 setting reference level the reference level (upper end of amplitude scale) can be set. Example: to set the reference level to 10 dbm 1. Press . 2. Press (reference level). 3. After pressing , press (dbm) to set the reference level..

  • Page 45

    2.4 setting level 2-29 2 basic operation 2.4.2 setting input attenuator (1) auto mode the input attenuator is automatically set according to the set reference level. When a signal of the same level as the reference level is input, the input level to the internal mixer is set so as become 10 dbm or ...

  • Page 46

    Chapter 2 basic operation 2-30 table 2.4.2-2 input attenuators set in auto mode (when pre-amp is set to on) n = reference level (dbm) attenuator auto (db) resolution 2 db resolution 10 db 130 n 20 10 10 20 n 18 12 20 18 n 16 14 20 16 n 14 16 20 14 n 12 18 20 12 n 10 20 20 10...

  • Page 47

    2.4 setting level 2-31 2 basic operation (2) manual mode to measure extremely low level signals such as low level harmonic spurious signals, set the input attenuator manually. The setting range of the input attenuator in manual setting is as follows. The following tables show the setting range and r...

  • Page 48

    Chapter 2 basic operation 2-32 table 2.4.2-4 input attenuator setting range (when pre-amp is set to off) attenuator manual lower limit upper limit logic* (  = 0,  = 1,  = 2) the minimum value is 0 db. 60 db table 2.4.2-5 input attenuator setting range (when pre-amp is set to on) attenuator manual...

  • Page 49: 2.4.3 Setting Scale

    2.4 setting level 2-33 2 basic operation 2.4.3 setting scale pressing (scale) on the amplitude function menu displays the scale function menu. Table 2.4.3-1 scale function menu function key menu display function f1 scale (log/lin) selects the scale mode (log/lin). This switches f2 and f3 display. F2...

  • Page 50

    Chapter 2 basic operation 2-34 (1) setting the log scale the log scale can be selected from the following: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0, 10.0, 20.0 db/div example: to set log scale division to 20 db/div and number of scale lines to 12 1. Press . 2. Press (scale). 3. Press (scale) and select log. 4. ...

  • Page 51

    2.4 setting level 2-35 2 basic operation 2.4.4 setting reference level unit the level display unit for the log scale mode can be set. In the case of lin scale, the level display unit is fixed to v. Reference level display unit dbm, db v, dbmv, v, w, dbv (emf), dbv/m example: to set the reference ...

  • Page 52

    Chapter 2 basic operation 2-36 2.4.5 setting reference level offset the waveform trace can be displayed with an arbitrary offset value added. Setting range and resolution for reference level offset setting range: 100 to 100 db resolution: 0.01 db figure 2.4.5-1 adding an offset value example: to se...

  • Page 53: 2.4.6 Pre-Amp

    2.4 setting level 2-37 2 basic operation 2.4.6 pre-amp note: this function can be set only when ms2830a-008/108/068/168, ms2840a-008/108/068/168/069/169, ms2850a-068/168 pre-amp is installed. The level sensitivity can be increased by setting pre-amp to on. Example: to set pre-amp to on 1. Press . 2....

  • Page 54: 2.5 Setting

    Chapter 2 basic operation 2-38 2.5 setting rbw/vbw the resolution bandwidth (rbw) and video bandwidth (vbw) can be selected either automatically or arbitrarily. Pressing (bw) on the main function menu, or pressing displays the bw function menu. Figure 2.5-1 bw key.

  • Page 55

    2.5 setting rbw/vbw 2-39 2 basic operation table 2.5-1 bw function menu function key menu display function f1 rbw (auto/manual) selects automatic or manual setting of the resolution bandwidth (rbw) for the mode set with (rbw mode). When rbw mode is normal: 2.5.1 “setting resolution bandwidth (rbw) ”...

  • Page 56

    Chapter 2 basic operation 2-40 2.5.1 setting resolution bandwidth (rbw) auto or manual can be selected for setting resolution bandwidth (rbw). This function is available if rbw mode is set to normal when ms2830a-016/116, ms2840a-016/116 is installed. Auto the resolution bandwidth is automatically se...

  • Page 57

    2.5 setting rbw/vbw 2-41 2 basic operation 2.5.2 setting video bandwidth (vbw) auto or manual can be selected for setting video bandwidth (vbw). Auto the video bandwidth is set to the same as the resolution bandwidth (rbw) or the nearest value. It is set to off when the detection mode (detection) is...

  • Page 58

    Chapter 2 basic operation 2-42 2.5.3 setting video vbw/power vbw the spectrum analyzer function allows selection of either video vbw or power vbw as the video filter for the better and smooth screen display. Two vbm modes video: performs smoothing and averaging with a video filter after logarithmic ...

  • Page 59

    2.5 setting rbw/vbw 2-43 2 basic operation 2.5.4 setting span:rbw ratio the span:rbw ratio can be turned on or off, and the span:rbw ratio can be specified. This function is available when the rbw mode is set to auto. Span:rbw ratio (on/off) turns on or off the span:rbw ratio function. On (enabled) ...

  • Page 60

    Chapter 2 basic operation 2-44 2.5.5 setting cispr resolution bandwidth (rbw) this function is available if rbw mode is set to cispr when ms2830a-016/116, ms2840a-016/116 is installed. Refer to section 2.5.1 “setting resolution bandwidth (rbw)” when the mode is set to normal. The following restricti...

  • Page 61

    2.5 setting rbw/vbw 2-45 2 basic operation figure 2.5.5-1 screen for cispr.

  • Page 62

    Chapter 2 basic operation 2-46..

  • Page 63

    3-1 3 d is pla y m od e s elec tio n display mode selection chapter 3 this chapter describes the trace, storage mode, and wave detection mode. 3.1 setting storage mode ................................................... 3-2 3.1.1 storage mode types ......................................... 3-3 3.1.2...

  • Page 64

    Chapter 3 display mode selection 3-2 3.1 setting storage mode pressing (trace) on the main function menu, or pressing displays the trace function menu. Figure 3.1-1 trace key table 3.1-1 trace function menu function key menu display function f1 active trace selects trace to be set. Trace type and st...

  • Page 65

    3.1 setting storage mode 3-3 3 d is pla y m od e s elec tio n 3.1.1 storage mode types the following storage modes can be selected for trace a, trace b, trace c, trace d, trace e, and trace f. Table 3.1.1-1 storage mode types mode display description display example lin average lin in the log displa...

  • Page 66: 3.1.2 Averaging Function

    Chapter 3 display mode selection 3-4 3.1.2 averaging function this function displays the averaged trace results. Example: to set trace a to average and the storage count to 100 1. Press . 2. Press (active trace) and then press (a). 3. Press (storage mode) and select (average). 4. Press (storage coun...

  • Page 67

    3.1 setting storage mode 3-5 3 d is pla y m od e s elec tio n 3.1.3 max hold/min hold function this function holds and displays the maximum value (max hold) or minimum value (min hold) of the trace data. Example: to set trace a to max hold, trace b to min hold, and simultaneous display 1. Press . 2....

  • Page 68

    Chapter 3 display mode selection 3-6 3.1.4 setting wave detection mode the wave detection mode can be selected from the modes listed in table 3.1.4-1. When couple time/frequency domain is set to off, each parameter is specified in accordance with the already-specified frequency axis or time axis mea...

  • Page 69

    3.1 setting storage mode 3-7 3 display mode selection figure 3.1.4-1 screen display differences according to wave detection mode pos & neg sample points screen display positive negative sample sample points screen display screen display.

  • Page 70

    Chapter 3 display mode selection 3-8 example: to set the wave detection mode to negative 1. Press . 2. Press (detection) and then press (negative). Figure 3.1.4-2 wave detection mode selection trace parameter wave detection mode.

  • Page 71

    3.1 setting storage mode 3-9 3 d is pla y m od e s elec tio n 3.1.5 displaying and updating trace you can configure trace type display settings here. Table 3.1.5-1 lists the available options. Table 3.1.5-1 trace type writing modes trace type writing modes display description write w updates the dis...

  • Page 72: 3.2  Setting Limit Line

    Chapter 3 display mode selection 3-10 3.2 setting limit line you can evaluate trace data by drawing limit line. Notes: ● the limit line function is not available when measure function is set to on. ● limit test (evaluation of trace data) is not performed when, on the amplitude function menu, the sca...

  • Page 73

    3.2 setting limit line 3-11 3 d is pla y m od e s elec tio n 3.2.1 setting limit function parameters pressing (trace) on the main function menu or pressing displays the trace function menu. Selecting (limits) on the trace function menu displays the limit function menu. Example: to draw –20 dbm limit...

  • Page 74: 3.2.2  Setting Limits

    Chapter 3 display mode selection 3-12 3.2.2 setting limits selecting (limits) on the trace function menu displays the limits function menu. You can set six types of limit line. Table 3.2.2-1 limits function menu function key menu display function f1 limit1 sets limit line 1. 3.2.3 “setting limit1 to...

  • Page 75

    3.2 setting limit line 3-13 3 d is pla y m od e s elec tio n 3.2.3 setting limit1 to 6 selecting (limit1) to (limit6) on the limits function menu displays limit1 to limit6 function menu. Table 3.2.3-1 limit1 to 6 function menus function key menu display function page 1 limit1 to limit6 press (limit1...

  • Page 76

    Chapter 3 display mode selection 3-14 table 3.2.3-1 limit1 to 6 function menus (cont’d) function key menu display function page 2 limit1 to limit6 press (limit1) to (limit6) on the limits function menu and then press to display page 2. F1 limit line type (frequency) sets the mode of setting the freq...

  • Page 77

    3.2 setting limit line 3-15 3 d is pla y m od e s elec tio n (2) margin function example: to display a margin line by adding the limit line with –20 db 1. Press . 2. Press (limits). 3. Press (limit1). 4. Press (margin) to set it to on. 5. Press (margin value). 6. Press , and then press (db) to set m...

  • Page 78: 3.2.4  Edit Parameters

    Chapter 3 display mode selection 3-16 3.2.4 edit parameters selecting (edit) on the limit1 to 6 function menu displays the edit-limit x function menu. Table 3.2.4-1 edit-limit x function menu function key menu display function f1 point sets the limit point you want to edit. F2 add point adds a limit...

  • Page 79

    3.2 setting limit line 3-17 3 d is pla y m od e s elec tio n (1) setting point point setting range: 1 to limit points (max: 100) minimum resolution: 1 rotary knob resolution: 1 step key resolution: 1 (2) setting frequency offset example: to set frequency offset to 1 ghz 1. Press . 2. Press (limits)....

  • Page 80

    Chapter 3 display mode selection 3-18 (3) setting amplitude example: to set amplitude to –10 dbm 1. Press . 2. Press (limits). 3. Press (limit1). 4. Press (edit). 5. Press (amplitude). 6. Press , and press (dbm) to set amplitude. Amplitude when limit line type (amplitude) is abs. Setting range: –300...

  • Page 81

    3.2 setting limit line 3-19 3 d is pla y m od e s elec tio n (4) connected to previous pt pass/fail evaluation between limit points is performed by making linear interpolation between the current limit point and the other limit point that is located on the nearest left of the current limit point. Al...

  • Page 82

    Chapter 3 display mode selection 3-20 (6) creating a new limit line 1. Press (edit). 2. Press (add point). 3. Set the frequency. 4. Set the amplitude. 5. Press (connected to previous pt) and set to on/off. 6. Set the previous pt level offset. 7. Repeat steps 3 to 6 until the limit points are set. (7...

  • Page 83

    3.2 setting limit line 3-21 3 d is pla y m od e s elec tio n 3.2.5 limit envelope function selecting (envelope) on the limit1 to 6 function menu displays the envelope-limit x function menu. Set the values of the following: (points), (offset) and (shape). Then, clicking (create envelope) automaticall...

  • Page 84

    Chapter 3 display mode selection 3-22 create envelope example: when executing the create envelope menu with the following menu settings: type: upper, trace points: 15, points: 3, offset: 5 db, shape: slope the following figure shows a limit line (—) and limit points ( ○) that are automatically creat...

  • Page 85

    3.2 setting limit line 3-23 3 d is pla y m od e s elec tio n points setting range: when shape is set to slope: 2 to (trace points–2) × 2 + 2, (max: 100) when shape is set to square: 2 to trace points, (max: 100) default: 41 resolution: 1 (slope), 2 (square) shape when shape is set to slope: the numb...

  • Page 86

    Chapter 3 display mode selection 3-24 3.2.6 saving a limit file the save function menu is displayed by pressing when the spectrum analyzer screen is active. For details on the functions, refer to table 3.2.6-1. Table 3.2.6-1 save function menu function key menu display function f1 device sets a save...

  • Page 87

    3.2 setting limit line 3-25 3 d is pla y m od e s elec tio n on the save limit function menu, you can save settings of limit line to a file. Table 3.2.6-2 save limit function menu function key menu display function f1 limit1 saves the settings for limit line1 to a file with a specified name. F2 limi...

  • Page 88

    Chapter 3 display mode selection 3-26 3.2.7 loading a limit file the recall function menu is displayed by pressing when the spectrum analyzer screen is active. For details on the functions, refer to table 3.2.7-1. On the recall function menu, you can load and delete limit line files. Table 3.2.7-1 r...

  • Page 89

    3.2 setting limit line 3-27 3 d is pla y m od e s elec tio n load source directory of limit line file or limit line file formats that can be recalled csv, lim, xml on the recall limit1 to 6 function menu, you can select limit line file(s) you want to load or delete. Table 3.2.7-3 recall limit1 to 6 ...

  • Page 90: 3.3.1  Setting Normalize

    Chapter 3 display mode selection 3-28 3.3 setting normalize function this function is available for ms2830a only when ms2830a-052/152/352 is installed. Pressing (trace) on the main function menu, or pressing displays the trace function menu. Selecting (normalize) on the trace function menu displays ...

  • Page 91

    3.3 setting normalize function 3-29 3 d is pla y m od e s elec tio n the trace data stored by (store ref.) is initialized in the following conditions. (normalize) is turned off by the initialization. ● sg control on/off is changed. ● the trace selected by select trace is changed. ● the trace type wr...

  • Page 92

    Chapter 3 display mode selection 3-30 3.3.2 setting save correction csv data this function is available for ms2830a only when ms2830a-052/152/352 is installed. When the spectrum analyzer screen is displayed, press and then (save correction csv data) to store amplitude frequency characteristic of act...

  • Page 93: 3.4.1  Setting Math

    3.4 setting math function 3-31 3 d is pla y m od e s elec tio n 3.4 setting math function this function is available only for ms2830a. Pressing (trace) on the main function menu, or pressing displays the trace function menu. Selecting (math) on the trace function menu displays the math function menu...

  • Page 94: 3.5  Setting Time/sweep

    Chapter 3 display mode selection 3-32 3.5 setting time/sweep pressing (time/sweep) on the main function menu, or pressing displays the time/sweep function menu. Figure 3.5-1 time/sweep key table 3.5-1 time/sweep function menu function key menu display function f1 sweep time (auto/manual) sets the au...

  • Page 95

    3.5 setting time/sweep 3-33 3 d is pla y m od e s elec tio n 3.5.1 setting sweep time set the sweep time. When auto is set, the optimum value is set automatically. Each parameter is specified in accordance with the already-specified frequency axis or time axis measurement. Setting range and resoluti...

  • Page 96: 3.5.2  Setting Trace Point

    Chapter 3 display mode selection 3-34 3.5.2 setting trace point trace point refers to the number of waveform data points. When couple time/frequency domain is set to off, each parameter is specified in accordance with the already-specified frequency axis or time axis measurement. The following numbe...

  • Page 97: 3.5.3  Sweep Type Rules

    3.5 setting time/sweep 3-35 3 d is pla y m od e s elec tio n 3.5.3 sweep type rules for sweep (sw) type rules, specify the rules for determining which sweep method to use (sweep type or fft type) when performing a frequency sweep. When rbw mode is set to cispr, auto sweep type rules is fixed to swep...

  • Page 98

    Chapter 3 display mode selection 3-36 table 3.5.3-2 fft width function menu function key menu display function f1 ≤ 40 khz uses an fft width of 40 khz or less. F2 ≤ 2 mhz uses an fft width of 2 mhz or less. Figure 3.5.3-1 fft display note: fft is not displayed when the spectrum emission mask measure...

  • Page 99: 3.6  Save On Event

    3.6 save on event 3-37 3 d is pla y m od e s elec tio n 3.6 save on event the save on event function menu is displayed by pressing and (save on event) when the spectrum analyzer screen is active. For details on the functions, refer to table 3.6.1-1. 3.6.1 setting save on event the save on event func...

  • Page 100

    Chapter 3 display mode selection 3-38 file name this menu is used to set the filename (underlined part of the following) that is internal data of a waveform file to be saved as folder.Csv when performing the save on event function. Filename,date,999.500001 mhz,999.501819 mhz,…,1000.500001 mhz lim201...

  • Page 101

    3.6 save on event 3-39 3 d is pla y m od e s elec tio n 3.6.2 waveform files for save on event this section describes waveform files to be saved when the save on event function is turned on. Save destination and load source for waveform files after the parameters are set, a folder is created by the ...

  • Page 102

    Chapter 3 display mode selection 3-40. Meaning of description in file format _p: positive detection, _n: negative detection, _r: rms detection, _s: sample detection 3.6.3 delete waveform files for save on event the recall function menu is displayed by pressing when the spectrum analyzer screen is ac...

  • Page 103

    4-1 4 ma rk er f un ct ion marker function chapter 4 this chapter describes the marker functions. 4.1 setting marker ............................................................... 4-2 4.1.1 setting normal marker ...................................... 4-5 4.1.2 setting delta marker ....................

  • Page 104: 4.1 Setting

    Chapter 4 marker function 4-2 4.1 setting marker pressing (marker) on the main function menu, or pressing displays the marker function menu. The marker function menu consists of two pages, which can be toggled by pressing . Figure 4.1-1 marker key table 4.1-1 marker function menu function key menu f...

  • Page 105

    4.1 setting marker 4-3 4 ma rk er f un ct ion table 4.1-1 marker function menu (cont’d) function key menu function f8 next peak searches for the second biggest peak after the active marker, and moves the marker so that the marker becomes the center frequency of the zone marker. 4.2.2 “executing next...

  • Page 106

    Chapter 4 marker function 4-4 zone width function menu pressing (zone width) on the marker function menu displays the zone width function menu. Table 4.1-2 zone width function menu function key menu function f1 type (zone/spot) switches between the spot marker and the zone marker. 4.1.3 “setting zon...

  • Page 107

    4.1 setting marker 4-5 4 marker function 4.1.1 setting normal marker normal markers are displayed as ▼ and display the frequency (time) and level on the screen. 1. Press . 2. Press (normal) to display the normal markers. 3. Press (off) to stop displaying the markers. Example: to set all the markers ...

  • Page 108

    Chapter 4 marker function 4-6 4.1.3 setting zone marker the area enclosed by the dashed lines in figure 4.1.3-1 is called a zone marker. The current marker exists within this zone marker and moves to the maximum level point within the range indicated by the zone marker. The frequency (or time) and l...

  • Page 109

    4.1 setting marker 4-7 4 ma rk er f un ct ion example: to set the zone marker width to 10 mhz 1. Press . 2. Press (zone width) to open the zone width function menu. 3. After pressing , press (mhz) and set the zone marker width. Example: to set the spot marker. 1. Press . 2. Press (zone width) to ope...

  • Page 110

    Chapter 4 marker function 4-8 4.1.5 setting active marker select an active marker. You can set the position of the active marker by using the rotary knob and step key. Example: to set the active marker to 2. 1. Press . 2. Press (active marker). 3. Press (marker 2) to set the active marker to 2. 4.1....

  • Page 111

    4.1 setting marker 4-9 4 ma rk er f un ct ion 4.1.7 setting type of result display the marker result function is used to select a type of a marker result. Marker result function menu press (marker result) on page 2 of the marker function menu to display the marker result function menu. Table 4.1.7-1...

  • Page 112

    Chapter 4 marker function 4-10 this function allows you to select the power (total power, total density, and peak power) displayed in the zone marker. Example: to display the power per 1 hz in the zone band. 1. Press . 2. Press to move to page 2 of the marker function menu, and then press (marker re...

  • Page 113: 4.1.8  Setting Freq.Count

    4.1 setting marker 4-11 4 ma rk er f un ct ion 4.1.8 setting freq.Count the freq.Count function menu is used to set up frequency counter measurement. Freq.Count function menu press (freq.Count) in page 2 of marker function menu to display the freq.Count function menu. Table 4.1.8-1 freq.Count functi...

  • Page 114

    Chapter 4 marker function 4-12 4.1.9 setting n db bandwidth the n db bandwidth function is available only for ms2830a. Press (n db bandwidth) in page 3 of marker function menu to display the n db bandwidth function menu. Displays a bandwidth between the two points located n db lower than the selecte...

  • Page 115

    4.2 setting peak search function 4-13 4 ma rk er f un ct ion 4.2 setting peak search function four types of peak search function are available, peak, next peak, min, and next min search. Peak search function menu pressing (peak search) on page 2 of the main function menu, or pressing displays the pe...

  • Page 116

    Chapter 4 marker function 4-14 table 4.2-1 peak search function menu function key menu display function page1 peak search press (peak search) to display this page. F1 peak search moves the marker so that the maximum level point in the measurement band becomes the center frequency of the zone marker....

  • Page 117

    4.2 setting peak search function 4-15 4 ma rk er f un ct ion table 4.2-1 peak search function menu (cont’d) function key menu display function f4 next min this command searches for the next dip of the active marker and moves the marker so that it becomes the center frequency of the zone marker. 4.2....

  • Page 118

    Chapter 4 marker function 4-16 marker search function menu press (marker search function) on the peak search function menu to display the marker search function menu. Table 4.2-3 marker search function menu function key menu function f1 search peaks sort y sorts the markers by level in relation to t...

  • Page 119

    4.2 setting peak search function 4-17 4 ma rk er f un ct ion 4.2.1 executing peak search detects the maximum level point from the trace in the display and moves the marker. If there are several peak points, the marker moves to the point with smallest frequency (or time) (left side of scale). The pea...

  • Page 120

    Chapter 4 marker function 4-18 4.2.4 setting search threshold value specify the threshold value with the peak detection level. This also becomes the threshold value for the min search. The threshold value is displayed on the screen, and search upward or downward from this level can be specified. Exa...

  • Page 121

    4.2 setting peak search function 4-19 4 ma rk er f un ct ion 4.2.5 executing marker to center freq./marker to ref. Level the center frequency and reference level of the trace can be adjusted to match the frequency and level of the active marker. ● marker to center freq. Sets the marker frequency to ...

  • Page 122

    Chapter 4 marker function 4-20 4.2.6 executing marker search function sorts the markers set by search peaks number by frequency (time) or level. Note: marker search function can be executed when marker result is set to peak. 4.1.7 “setting type of result display” example: to sort three markers by le...

  • Page 123

    4.2 setting peak search function 4-21 4 ma rk er f un ct ion 4.2.7 executing power peak search this command moves the active marker to the position where the peak power of the zone width of the active marker becomes maximum in the measurement band. If there are several peak points, the marker moves ...

  • Page 124

    Chapter 4 marker function 4-22 4.2.9 executing min search this command moves the marker so that the minimum level point in the measurement band becomes the center frequency of the zone marker. Execute min search as follows: 1. Press . 2. Press to display page 2 of the peak search function menu. 3. P...

  • Page 125

    4.3 displaying marker list 4-23 4 ma rk er f un ct ion 4.3 displaying marker list displays the marker result list. The marker frequency and power are displayed on the list. Example: to set the marker display to on. 1. Press . 2. After pressing to move to page 2 of the marker function menu, press (ma...

  • Page 126

    Chapter 4 marker function 4-24..

  • Page 127

    5-1 5 t rig ger funct ion and gate functio n trigger function and gate function chapter 5 this chapter describes the trigger function and the gate function. 5.1 setting trigger function ............................................... 5-2 5.1.1 trigger sweep .............................................

  • Page 128

    Chapter 5 trigger function and gate function 5-2 5.1 setting trigger function pressing (trigger/gate) from the main function menu, or pressing displays the trigger function menu. The trigger function menu consists of three pages, which can be toggled by pressing . Figure 5.1-1 trigger/gate key.

  • Page 129

    5.1 setting trigger function 5-3 5 t rig ger funct ion and gate functio n table 5.1-1 trigger function menu function key menu display function page1 trigger press (trigger/gate) to display this page. F1 trigger switch (on/off) enables the trigger function. 5.1.1 “trigger sweep” f2 trigger source sel...

  • Page 130

    Chapter 5 trigger function and gate function 5-4 table 5.1-1 trigger function menu (cont’d) function key menu display function page2 gate press (trigger/gate), and then press to display page 2. F1 gate sweep (on/off) enables the gate function. 5.2.1 “gate sweep” f2 gate view* (on/off) displays the g...

  • Page 131: 5.1.1 Trigger Sweep

    5.1 setting trigger function 5-5 5 t rig ger funct ion and gate functio n 5.1.1 trigger sweep trigger sweep executes sweep using the specified trigger condition as the start point. A delay time until sweep start can be set through trigger delay. Trigger delay can be set only in the time domain mode....

  • Page 132

    Chapter 5 trigger function and gate function 5-6 example: to set the trigger level to +40 dbm, and trigger slope to rise 1. Press . 2. Press (trigger source) and then press (video). 3. Press to return to the previous menu. 4. Press (trigger level (video)). 5. After pressing , press (dbm) to set the ...

  • Page 133

    5.1 setting trigger function 5-7 5 t rig ger funct ion and gate functio n (2) wide if video trigger an if signal with a wide passing band of about 50 mhz or greater is detected, and sweep starts in synchronization with either the rise or fall of the detected signal. Setting range and resolution for ...

  • Page 134

    Chapter 5 trigger function and gate function 5-8 (4) frame trigger an equipment-internal trigger signal is used to generate a trigger and start the sweep. The generation period (period) and offset time (offset) for the trigger signal can be set. It is also possible to resynchronize the trigger signa...

  • Page 135

    5.1 setting trigger function 5-9 5 t rig ger funct ion and gate functio n table 5.1.1-2 frame sync setup function menu function key menu display function f1 off captures waveforms according to the equipment-internal trigger signal. F2 wide if video captures waveforms according to the equipment-inter...

  • Page 136: 5.2  Setting Gate Function

    Chapter 5 trigger function and gate function 5-10 5.2 setting gate function 5.2.1 gate sweep gate sweep executes sweep only for the length of time specified with the gate length. The sweep start point is determined by adding a delay time specified with the gate delay to the time when the trigger con...

  • Page 137

    5.2 setting gate function 5-11 5 t rig ger funct ion and gate functio n (1) wide if video trigger an if signal with a wide passing band of approximately 5 mhz or greater is detected and sweep starts in synchronization with either the rise or fall of that signal. Example: to set the gate delay to 100...

  • Page 138

    Chapter 5 trigger function and gate function 5-12 (2) external trigger sweep is executed only for the gate length time, using the rise or fall of the signal input to the external input connector as the start point. Example: to set the gate delay to 100 s, gate length to 300 s, and gate slope to fa...

  • Page 139

    5.2 setting gate function 5-13 5 t rig ger funct ion and gate functio n (3) frame trigger an equipment-internal trigger signal is used to generate a trigger and start the sweep. The generation period (period) and offset time (offset) for the trigger signal can be set. It is also possible to resynchr...

  • Page 140

    Chapter 5 trigger function and gate function 5-14 table 5.2.1-2 frame sync setup function menu function key menu display function f1 off captures waveforms according to the equipment-internal trigger signal. F2 wide if video captures waveforms according to the equipment-internal trigger signal. The ...

  • Page 141: 5.2.2 Gate View

    5.2 setting gate function 5-15 5 t rig ger funct ion and gate functio n 5.2.2 gate view this section describes the gate view. An assistant view (the gate view) for setting up the gate sweep segment is displayed on the lower part of the screen when gate view is set to on. By using the gate view, you ...

  • Page 142

    Chapter 5 trigger function and gate function 5-16 pressing (gate view setting) on page 2 of the trigger function menu displays the gate view setting function menu. This menu consists of two pages that are toggled by pressing . Table 5.2.2-2 gate view setting function menu function key menu display f...

  • Page 143

    5.2 setting gate function 5-17 5 t rig ger funct ion and gate functio n table 5.2.2-2 gate view setting function menu (cont’d) function key menu display function f4 vbw (auto/manual) selects auto setting or manual setting for the video bandwidth (vbw). The value that is the same as or closest to the...

  • Page 144

    Chapter 5 trigger function and gate function 5-18. Table 5.2.2-2 gate view setting function menu (cont’d) function key menu display function f7 attenuator sets the attenuator when spurious emission is set to on. The attenuator for the frequency domain is set and this menu item is disabled when spuri...

  • Page 145

    6-1 6 me asure functio n measure function chapter 6 this chapter describes the measure function of the spectrum analyzer function. 6.1 selecting measure function ......................................... 6-2 6.2 adjacent channel leakage power measurement (acp) ..........................................

  • Page 146

    Chapter 6 measure function 6-2 6.1 selecting measure function pressing (measure) on page 2 of the main function menu, or pressing displays the measure function menu. Figure 6.1-1 measure key table 6.1-1 measure function menu function key menu display function page1 measure press to display this page...

  • Page 147

    6.1 selecting measure function 6-3 6 me asure functio n table 6.1-1 measure function menu (cont’d) function key menu display function page1 measure press to display this page. F8 standard automatically sets the parameters according to the communication method, through specification of the input sign...

  • Page 148: (Acp)

    Chapter 6 measure function 6-4 6.2 adjacent channel leakage power measurement (acp) pressing (acp) on the measure function menu displays the acp function menu. Figure 6.2-1 acp function menu f2 f1 f3 f4 f5 f6 f7 f8.

  • Page 149

    6.2 adjacent channel leakage power measurement (acp) 6-5 6 me asure functio n table 6.2-1 acp function menu function key menu display function page1 acp press (acp) to display this page. F1 acp (on/off) the other measure functions are set to off when acp is set to on. F2 acp reference sets the refer...

  • Page 150

    Chapter 6 measure function 6-6 table 6.2-1 acp function menu (cont’d) function key menu display function page2 acp press (acp), and then press to display page 2. F1 offset setup mode set either the normal or adv. Mode with different offset setting contents. When adv. Is selected, the measurement res...

  • Page 151

    6.2 adjacent channel leakage power measurement (acp) 6-7 6 me asure functio n pressing (offset setup) in the acp function menu displays offset setup function menu. The offset setup function menu consists of two pages. Press to change the page. Table 6.2-3 offset setup function menu function key menu...

  • Page 152

    Chapter 6 measure function 6-8 the offset setup (advanced) function menu consists of 8 pages that are toggled by pressing . Figure 6.2-2 offset setup (advanced) function menu.

  • Page 153

    6.2 adjacent channel leakage power measurement (acp) 6-9 6 me asure functio n table 6.2-4 offset setup (advanced) function menu function key menu display function f1 edit offset number selects the offset number to be edited. Range: 1 to 8 f2 offset (on/off) sets the selected offset channel on/off. F...

  • Page 154

    Chapter 6 measure function 6-10 the display items for the measurement results when power result type (table 6.2-1) is set to offset are described below. Figure 6.2-3 display items for measurement result table 6.2-5 display items for measurement result no. Display description [1] span total/ carrier ...

  • Page 155

    6.2 adjacent channel leakage power measurement (acp) 6-11 6 me asure functio n the display items for the measurement results when power result type (table 6.2-1) is set to carrier are described below. Figure 6.2-4 display items for the measurement results table 6.2-6 display items for the measuremen...

  • Page 156

    Chapter 6 measure function 6-12 6.3 burst average power measurement pressing (burst average power) on the measure function menu displays the burst average power function menu. Table 6.3-1 burst average power function menu function key menu display function f1 burst average power (on/off) the other m...

  • Page 157

    6.3 burst average power measurement 6-13 6 me asure functio n figure 6.3-1 display items for measurement result table 6.3-2 display items for measurement result no. Display description [1] start time displays the start position (time) of the measurement interval. [2] stop time displays the stop posi...

  • Page 158

    Chapter 6 measure function 6-14 6.4 channel power measurement (channel power) press (channel power) on the measure function menu to display the channel power function menu. Table 6.4-1 channel power function menu function key menu display function f1 channel power (on/off) the other measure function...

  • Page 159

    6.4 channel power measurement (channel power) 6-15 6 me asure functio n figure 6.4-1 display items for measurement results table 6.4-2 display items for measurement results no. Display description [1] channel center displays the setting value of the channel center frequency. [2] channel width displa...

  • Page 160: Bandwidth)

    Chapter 6 measure function 6-16 6.5 occupied bandwidth measurement (occupied bandwidth) press (occupied bandwidth) on the measure function menu to display the occupied bandwidth function menu. Table 6.5-1 occupied bandwidth function menu function key menu display function f1 obw (on/off) the other m...

  • Page 161

    6.5 occupied bandwidth measurement (occupied bandwidth) 6-17 6 me asure functio n figure 6.5-1 display items for measurement results table 6.5-2 display items for measurement results no. Display description [1] obw displays the occupied bandwidth. [2] obw center displays the center frequency of the ...

  • Page 162: Emission Mask)

    Chapter 6 measure function 6-18 6.6 spectrum emission mask measurement (spectrum emission mask) on the measure function menu, pressing (spectrum emission mask) displays the spectrum emission mask function menu. Table 6.6-1 spectrum emission mask function menu function key menu function f1 spectrum e...

  • Page 163

    6.6 spectrum emission mask measurement (spectrum emission mask) 6-19 6 me asure functio n pressing (reference setup) in the spectrum emission mask function menu displays the reference setup function menu. The reference setup function menu consists of three pages. Press to change the page. Table 6.6-...

  • Page 164

    Chapter 6 measure function 6-20 table 6.6-2 reference setup function menu (cont’d) function key menu function page2 reference setup press (reference setup), and then press to display page 2. F2 rbw auto/manual switches auto/manual setting of rbw when measuring the reference power. F3 rbw value sets ...

  • Page 165

    6.6 spectrum emission mask measurement (spectrum emission mask) 6-21 6 me asure functio n press (offset setup) in the spectrum emission mask function menu displays the offset setup function menu. The offset setup function menu consists of four pages. Press to change the page. Table 6.6-3 offset setu...

  • Page 166

    Chapter 6 measure function 6-22 table 6.6-3 offset setup function menu (cont’d) function key menu function page3 offset setup press (offset setup), and then press twice to display page 3. F1 edit offset number selects offset to be set. F2 sweep time auto/manual switches auto/manual setting of sweep ...

  • Page 167

    6.6 spectrum emission mask measurement (spectrum emission mask) 6-23 6 me asure functio n on the spectrum emission mask function menu, pressing (limit setup) displays the limit setup function menu. Table 6.6-4 limit setup function menu function key menu function f1 edit offset number selects the off...

  • Page 168

    Chapter 6 measure function 6-24 table 6.6-4 limit setup function menu (cont’d) function key menu function f3 abs1 start level sets the absolute level upper limit 1 of the offset start frequency. F4 abs1 stop level sets the absolute level upper limit 1 of the offset stop frequency. F5 abs2 start leve...

  • Page 169

    6.6 spectrum emission mask measurement (spectrum emission mask) 6-25 6 me asure functio n the display items for the measurement results are described below. Figure 6.6-1 display items for measurement results table 6.6-5 display items for measurement results no. Display description [1] result display...

  • Page 170

    Chapter 6 measure function 6-26 table 6.6-5 display items for measurement results (cont’d) no. Display description [5] trace parameter displays storage mode, storage times, and trace type writing mode. Displays storage count in % for spectrum emission mask. 3.1.2 “averaging function” the measurement...

  • Page 171

    6.6 spectrum emission mask measurement (spectrum emission mask) 6-27 6 me asure functio n an error occurs between the ibw setting value and the actual integral width, according to the frequency resolution of trace point. The error (error [hz]) is calculated by the following formula: 1 startfreq stop...

  • Page 172

    Chapter 6 measure function 6-28 6.7 spurious emission measurement once spurious emission measurement has been executed, the segments set in segment setup are swept. After the measurement has finished, the result is displayed. Furthermore, the spurious detected by the limit line set in each segment i...

  • Page 173

    6.7 spurious emission measurement 6-29 6 me asure functio n table 6.7-1 description of spurious emission function menu function key menu display function page1 spurious emission press (spurious emission) to display this page. F1 spurious emission (on/off) when set to on, the other measure functions ...

  • Page 174

    Chapter 6 measure function 6-30 table 6.7-1 description of spurious emission function menu (cont’d) function key menu display function f5 displayed segment mode (auto/manual) sets displayed segment mode to auto/manual. When set to auto, the setting of displayed segment is automatically switched in o...

  • Page 175

    6.7 spurious emission measurement 6-31 6 me asure functio n the parameters for save spurious emission parameter and recall spurious emission parameter are shown below: table 6.7-2 parameters to save/query parameter all the parameters (except spurious emission on/off) on spurious emission menu freque...

  • Page 176

    Chapter 6 measure function 6-32 table 6.7-3 descriptions of segment setup function menu function key menu display function page1 segment setup press (segment setup) to display this page. F1 edit segment number sets the segment number. F2 segment sets the segment to on/off. F3 start freq sets the sta...

  • Page 177

    6.7 spurious emission measurement 6-33 6 me asure functio n pressing (correction) on page 3 of the segment setup function menu displays the correction function menu. Table 6.7-4 descriptions of correction function menu function key menu display function f1 device selects the drive. F6 use common cor...

  • Page 178

    Chapter 6 measure function 6-34 pressing (time domain setup) on page 2 of the spurious emission function menu displays the time domain setup function menu. Table 6.7-6 descriptions of time domain setup function menu function key menu display function f1 edit segment number sets the segment. F2 coupl...

  • Page 179

    6.7 spurious emission measurement 6-35 6 me asure functio n when time domain measurement is set to on, time domain measurement is executed, as figure 6.7-1 shows. Figure 6.7-1 measurement sequence of time domain measurement start executing the sweep based on parameters in segment setup. Repeating th...

  • Page 180

    Chapter 6 measure function 6-36 figure 6.7-1 measurement sequence of time domain measurement (cont’d) from previous page executing time domain measurement by the following parameters: center frequency: f [hz] frequency span: 0 [hz] trace point: 1001 rbw: time domain rbw vbw: time domain vbw sweep ti...

  • Page 181

    6.7 spurious emission measurement 6-37 6 me asure functio n pressing (trace) on the main function menu or displays the trace function menu. During spurious emission measurement, the trace function menu changes, as shown below: table 6.7-7 descriptions of trace function menu function key menu display...

  • Page 182

    Chapter 6 measure function 6-38 display items of the measurement results are described below: when result type is set to worst, the summary page displays the spurious with the least margin from the limit line set in limit setup. Figure 6.7-2 display items of spurious emission measurement result (whe...

  • Page 183

    6.7 spurious emission measurement 6-39 6 me asure functio n table 6.7-8 descriptions of display items for spurious emission measurement results no. Item description [1] --- displays the trace of the segment. [2] no, segment, frequency, peak, margin, limit displays the summary page. Five measurement ...

  • Page 184

    Chapter 6 measure function 6-40 when result type is set to peaks, the spurious detected by search resolution and search threshold set in each segment is displayed on the summary page. Up to 10 spurious can be displayed per one segment. Figure 6.7-3 display items of spurious emission measurement resu...

  • Page 185

    6.7 spurious emission measurement 6-41 6 me asure functio n table 6.7-9 descriptions of spurious emission display items no. Item description [1] --- displays the trace of the segment. [2] no, segment, frequency, peak, margin, limit displays the summary page. Five measurement results are displayed pe...

  • Page 186

    Chapter 6 measure function 6-42 6.8 two-tone third order intermodulation distortion by inputting two different frequency cw signals (desired waves), two-tone third order intermodulation distortion is generated close to the desired waves according to non-linear characteristics of dut. Then, toi (thir...

  • Page 187

    6.8 two-tone third order intermodulation distortion 6-43 6 me asure functio n table 6.8-1 description of the toi function menu function key menu display function page 1 toi appears when pressing and (toi) in the measure function menu. F1 toi (on/off) turns off the other measurement functions if set ...

  • Page 188

    Chapter 6 measure function 6-44 figure 6.8-2 display items for measurement results [1] [3] [4] [5] [6] [2].

  • Page 189

    6.8 two-tone third order intermodulation distortion 6-45 6 me asure functio n table 6.8-2 description of display items for measurement results no. Item description [1] toi (dbm) displays the calculated toi. The worst value (lower) between two calculated values (lower and upper) is displayed. [2] amp...

  • Page 190

    Chapter 6 measure function 6-46 6.9 internal signal generator control function this function is available for ms2830a only when ms2830a-052/152/352 is installed. Dut characters are evaluated by controlling signal generator from spectrum analyzer. Display the 2nd page by pressing in the measure funct...

  • Page 191

    6.9 internal signal generator control function 6-47 6 me asure functio n table 6.9-1 sg control function menu (cont’d) function key menu display function f7 n db bandwidth displays a bandwidth between two points n db below the selected peak marker point. Displayed only on ms2830a. 4.1.9 “setting n d...

  • Page 192

    Chapter 6 measure function 6-48. 6.9.1 setting internal signal generator control function setting internal signal generator control press (sg control) in the sg control function menu to run the internal signal generator control function. When sg control is on, the sg is controlled and dut characteri...

  • Page 193

    7-1 7 o th er f un cti on s other functions chapter 7 this chapter describes the other functions of the spectrum analyzer function. 7.1 selecting other function .............................................. 7-2 7.2 setting title ................................................................... 7-...

  • Page 194

    Chapter 7 other functions 7-2 7.1 selecting other function pressing (accessory) on page 2 of the main function menu displays the accessory function menu. Table 7.1-1 accessory function menu function key menu display function f1 title sets the title character string. 7.2 “setting title” f2 title (on/...

  • Page 195: 7.2  Setting Title

    7.2 setting title 7-3 7 o th er f un cti on s 7.2 setting title a title of up to 32 characters can be displayed on the screen. (character strings of up to 17 characters can be displayed on a function menu.) 1. Press (accessory) on page 2 of the main function menu. 2. Press (title) to display the cha...

  • Page 196

    Chapter 7 other functions 7-4 7.3 erasing warmup message if the warmup message ( ) indicating that the level and frequency are not stable is displayed upon power on, the message can be deleted. 1. Press (accessory) on page 2 of the main function menu. 2. Press (erase warm up message) to delete the w...

  • Page 197

    7.4 setting uncal message 7-5 7 o th er f un cti on s 7.4 setting uncal message the spectrum analyzer function can also execute measurements when values for which the results cannot be guaranteed are set. In this case, the uncal message is displayed on the screen. Display of the uncal message can be...

  • Page 198

    Chapter 7 other functions 7-6 7.5 adjusting internal reference frequency signal pressing (reference clock) from the accessory function menu displays the reference clock function menu. Table 7.5-1 reference clock function menu function key menu display function f1 reference clock adjusts the frequenc...

  • Page 199

    7.6 input source for reference frequency signal 7-7 7 other functio n s 7.6 input source for reference frequency signal the reference frequency signal used is displayed on the screen. Ref.Int : the internal reference frequency signal is used. Ref.Int unlock : the internal reference frequency signal ...

  • Page 200

    Chapter 7 other functions 7-8 7.7 pre-amp on/off display if the ms2830a-008/108, ms2840a-008/108 pre-amp, ms2830a-068/168, ms2840a-068/168/069/169, or ms2850a-068/168 microwave preamplifier is installed, whether the pre-amp is on or off is displayed at the lower left of the screen. Figure 7.7-1 pre-...

  • Page 201: 7.8  Preselector Tuning

    7.8 preselector tuning 7-9 7 o th er f un cti on s 7.8 preselector tuning note: this function is available with ms2830a-044/045, ms2840a-044/046, ms2850a. This function is not available when external mixer is turned on. Pressing (preselector) from the accessory function menu displays the preselector...

  • Page 202

    Chapter 7 other functions 7-10. Ms2830a-044/045, ms2840a-044/046, ms2850a employs a preselector to eliminate unexpected responses such as image responses and multiple responses in order to let only the real signals appear on the display. The preselector is a tunable band-pass filter that follows the...

  • Page 203

    8-1 8 e xter na l m ix er external mixer chapter 8 this section describes the operation of the external mixer and measurement procedure using examples. 8.1 external mixer overview ............................................... 8-2 8.2 external mixer ....................................................

  • Page 204

    Chapter 8 external mixer 8-2 8.1 external mixer overview external mixer function is ms2830a-044/045, ms2840a-044/046, ms2850a dedicated function. The frequency range of ms2830a-044/045, ms2840a-044/046, ms2850a extends up to 325 ghz by using optional external mixer. Ma2806a, ma2808a, and ma2743c to ...

  • Page 205: 8.2  External Mixer

    8.2 external mixer 8-3 8 e xter na l m ix er 8.2 external mixer press (frequency) on page 1 of the main function menu, or press to display the frequency function menu. Then press (more) to show the second page of the frequency function menu for external mixer settings. Table 8.2-1 frequency function...

  • Page 206

    Chapter 8 external mixer 8-4 table 8.2-1 frequency function menu (cont’d) function keys menu display function f3 external mixer bias sets the external mixer bias. This function is available with ms2830a-044/045, ms2840a-044/046, or ms2850a. This function is not available when high performance wavegu...

  • Page 207

    8.2 external mixer 8-5 8 e xter na l m ix er table 8.2-1 frequency function menu (cont’d) function keys menu display function page 3 frequency press frequency, and then press twice to display this menu. F8 external mixer calibration* 4 executes the external mixer calibration function. This function ...

  • Page 208

    Chapter 8 external mixer 8-6 pressing (amplitude) on the main function menu, or pressing displays the amplitude function menu. Then press (more) to show the second page of the amplitude function menu for external mixer settings. Table 8.2-2 amplitude function menu function keys menu display function...

  • Page 209

    8.2 external mixer 8-7 8 e xter na l m ix er table 8.2-2 amplitude function menu (cont’d) function keys menu display function f7 offset (on/off) switches on/off the reference level offset function. 2.4.5 “setting reference level offset” f8 offset value sets the reference level offset value. 2.4.5 “s...

  • Page 210

    Chapter 8 external mixer 8-8 8.3 connecting external mixer 1. Fix the external mixer to the device under test. 2. Using the coaxial cable, connect the external mixer to the 1st local output on the front panel of ms2830a or ms2840a or ms2850a. Figure 8.3-1 external mixer connection notes: ● to connec...

  • Page 211

    8.4 setting band of external mixer 8-9 8 e xter na l m ix er 8.4 setting band of external mixer to set the band, perform the following key operation: press (external mixer band select) on page 2 of the frequency function menu, and use the function keys to select the desired band. Table 8.4-1 ext ban...

  • Page 212

    Chapter 8 external mixer 8-10 when selecting the band e– high performance 60-90 ghz, the ms2830a/ms2840a/ms2850a should be combined with the high performance waveguide mixer (60 to 90 ghz). The below equation shows the measurable side band phase noise on the selected band. Sideband phase noise = –95...

  • Page 213

    8.5 setting external mixer bias 8-11 8 e xter na l m ix er 8.5 setting external mixer bias sets the external mixer bias. Press (external mixer bias) on page 2 of the frequency function menu, and use the numeric keypad or rotary knob to input so that the received signal level becomes maximum. The dis...

  • Page 214

    Chapter 8 external mixer 8-12 8.6 setting conversion loss sets the external mixer conversion loss. If an accurate level measurement is necessary, use the value which was calibrated by the power meter. By default, this unit is adjusted to display the level that is derived from adding the input level ...

  • Page 215

    8.6 setting conversion loss 8-13 8 e xter na l m ix er figure 8.6-1 operation when correction factors are entered fa fb frequency (hz) level (dbm) correction factor input range la lb.

  • Page 216

    Chapter 8 external mixer 8-14 8.6.1 setting conversion loss table this executes loading of the external mixer conversion loss table. Connect the usb memory stick supplied with the high performance waveguide mixer. Press (conversion loss table) on external mixer conversion loss function menu to load ...

  • Page 217

    8.7 distinguishing measured signal - signal id 8-15 8 e xter na l m ix er 8.7 distinguishing measured signal - signal id in case of receiving unknown signals, be sure to turn on the signal id function. Signal id will be enabled by the following procedure below. On the second page of the frequency fu...

  • Page 218

    Chapter 8 external mixer 8-16 signal id cannot be set to on when measure function is on. Signal id cannot be set to on when ps function is on. When using the high performance waveguide mixer (60 to 90 ghz), signal id cannot be turned on if the start frequency is below 61.875 ghz..

  • Page 219

    8.8 setting signal id mode 8-17 8 e xter na l m ix er 8.8 setting signal id mode sets the signal id mode. Press (signal id mode) on page 2 of the frequency function menu, and use the function keys to select the desired mode. Table 8.8-1 signal id mode function menu function keys menu display functio...

  • Page 220: 8.9  Setting Ps Function

    Chapter 8 external mixer 8-18 8.9 setting ps function sets the ps function of the external mixer. Press (ps center on off) on page 2 of the frequency function menu. This function reverses the frequency polarity of the external mixer at the center frequency and displays the sweep result of the two po...

  • Page 221

    8.10 setting external mixer cable loss 8-19 8 e xter na l m ix er 8.10 setting external mixer cable loss sets the external mixer cable loss. When an accurate level measurement is necessary, perform level calibration of the external mixer, using the value calibrated by the power meter. The ms2830a/ms...

  • Page 222

    Chapter 8 external mixer 8-20 (1) correction of the calibration signal prepare a signal generator as the source of calibration signals. Calibrate the output signal of the signal generator by using the power sensor/meter. Frequency: 1875 mhz output level: –20 dbm ± 0.05 db figure 8.10-2 correction of...

  • Page 223

    8.10 setting external mixer cable loss 8-21 8 e xter na l m ix er (3) ms2830a, ms2840a, ms2850a setting set up the ms2830a, ms2840a or ms2850a as below. Configuration screen correction ● correction (on/off): off spectrum analyzer screen frequency ● external mixer (on/off): on ● external mixer band s...

  • Page 224

    Chapter 8 external mixer 8-22 8.11 external mixer calibration function when an accurate level measurement is necessary, execute the external mixer calibration function. Input the signal calibrated by the power meter to 1st local output port and press (external mixer calibration) on page 3 of frequen...

  • Page 225

    8.11 external mixer calibration function 8-23 8 e xter na l m ix er (1) correction of the calibration signal prepare a signal generator as the source of calibration signals. Calibrate the output signal of the signal generator by using the power sensor/meter. Frequency: 1875 mhz output level: –20 dbm...

  • Page 226

    Chapter 8 external mixer 8-24. (3) performing external mixer calibration press (external mixer calibration) to calibrate 1st local output port..

  • Page 227

    9-1 9 noise floor reduction noise floor reduction chapter 9 this section describes the operation of the noise floor reduction and measurement procedure using examples. 9.1 overview of noise floor reduction .............................. 9-2 9.2 noise floor reduction ....................................

  • Page 228

    Chapter 9 noise floor reduction 9-2 9.1 overview of noise floor reduction the noise floor reduction function is available when ms2840a-051/151 or ms2850a-051/151 is installed. To use the noise floor reduction function in the external mixer, ms2840a should be installed with ms2840a-044/046 in additio...

  • Page 229: 9.2 Noise

    9.2 noise floor reduction 9-3 9 noise floor reduction 9.2 noise floor reduction press (amplitude) on page 1 of the main function menu, or press to display the amplitude function menu. Then press (more) to show the second page of the amplitude function menu for noise floor reduction settings. Table 9...

  • Page 230

    Chapter 9 noise floor reduction 9-4 table 9.2-1 amplitude function menu (cont’d) function key menu display function page 2 amplitude press amplitude, and then press to display this menu. F1 impedance sets 50 /75  of impedance. 2.4.7 “setting impedance” f5 noise floor reduction info. Displays the t...

  • Page 231

    9.3 acquiring noise floor calibration values 9-5 9 noise floor reduction 9.3 acquiring noise floor calibration values 9.3.1 acquiring noise floor calibration values for using rf input the noise floor calibration values are stored installed with ms2840a-051/151 or ms2850a-051/151. Thus, noise floor r...

  • Page 232

    Chapter 9 noise floor reduction 9-6 9.3.2 acquiring noise floor calibration values for using external mixer to perform noise floor reduction when using the external mixer, the noise floor calibration values including the external mixer should be acquired in advance in the following procedure. Figure...

  • Page 233

    9.3 acquiring noise floor calibration values 9-7 9 noise floor reduction ● it takes 20 to 30 minutes to acquire the noise floor calibration values. Do not power off or operate when acquiring the calibration values. ● when a waveguide terminator can't be used, it is possible to use an attenuator with...

  • Page 234

    Chapter 9 noise floor reduction 9-8 9.4 using noise floor reduction to perform noise floor reduction, take the following procedure to enable the function. 1. Press (amplitude) on page 1 of the main function menu, or press to display the amplitude function menu. 2. Press (more) to show the second pag...

  • Page 235

    9.5 displaying information of noise floor calibration 9-9 9 noise floor reduction 9.5 displaying information of noise floor calibration take the following procedure to display the temperature at the execution of analyze noise floor or analyze external mixer noise floor and the elapsed time after the...

  • Page 236

    Chapter 9 noise floor reduction 9-10..

  • Page 237

    A-1 a p p e n d ix a ppe ndi x a appendix a specifications table a-1 error messages message explanation out of range. The settable range is exceeded. Not available in frequency domain. This operation is invalid during frequency domain display. Not available in time domain. This operation is invalid ...

  • Page 238

    Appendix a specifications a-2 table a-1 error messages (cont’d) message explanation not available in sg marker trigger. This operation is invalid when sg marker trigger is used. Not available if not vector signal generator option. This operation is invalid when vector signal generator option is not ...

  • Page 239

    Appendix a specifications a-3 app endix a ppendix a table a-1 error messages (cont’d) message explanation not available in acp and burst average power off. The operation is invalid while acp and burst average power are set to off. Not available in acp off. The operation is invalid while acp is set t...

  • Page 240

    Appendix a specifications a-4 table a-1 error messages (cont’d) message explanation not available when gate view is set to off. The operation is invalid when gate view is set to off. Not available when all traces are set to blank. The operation is invalid when all traces are set to blank. Not availa...

  • Page 241

    Appendix a specifications a-5 a p p e n d ix a ppe ndi x a table a-1 error messages (cont’d) message explanation not available in external mixer off. External mixer band select, external mixer bias, conversion loss, cable loss, signal id, signal id mode cannot be set with external mixer set to off. ...

  • Page 242

    Appendix a specifications a-6. Table a-1 error messages (cont’d) message explanation not available when math isn’ t set to off. The attempted operation is invalid when math is set to other than off. Not available in normalize on. The attempted operation is invalid when normalize is on. Not available...

  • Page 243: Ms2830A

    B-1 a pp en dix a ppe ndi x b appendix b ms2830a default value list ms2830a frequency center 1.8 ghz (ms2830a-040) 3 ghz (ms2830a-041) 6.75 ghz (ms2830a-043) 13.25 ghz (ms2830a-044) 21.5 ghz (ms2830a-045) start 0 hz stop 3.6 ghz (ms2830a-040) 6 ghz (ms2830a-041) 13.5 ghz (ms2830a-043) 26.5 ghz (ms28...

  • Page 244

    Appendix b ms2830a default value list b-2 log scale line 10 offset off, 0 db pre-amp off bw rbw auto, 3 mhz vbw auto, 3 mhz vbw mode power marker active marker marker1 marker mode normal zone width 360 mhz (ms2830a-040) 600 mhz (ms2830a-041) 1.35 ghz (ms2830a-043) 2.65 ghz (ms2830a-044) 4.3 ghz (ms2...

  • Page 245

    Appendix b ms2830a default value list b-3 a pp en dix a ppe ndi x b trace-a storage mode off trace-b storage mode off trace-c storage mode off trace-d storage mode off trace-e storage mode off trace-f storage mode off storage count 10 limits limit 1 to 6 type on limit display off limit test off marg...

  • Page 246

    Appendix b ms2830a default value list b-4 trigger/gate trigger switch off trigger source video trigger slope rise trigger level (video) − 40 dbm trigger level (wide if video) −20 dbm trigger hold off trigger hold 100 µ s trigger delay 0 s gate sweep off gate view off gate delay 0 s gate length 1.0 m...

  • Page 247

    Appendix b ms2830a default value list b-5 a pp en dix a ppe ndi x b time/sweep sweep time (frequency domain) auto, 1 ms (ms2830a-040) auto, 2 ms (ms2830a-041) auto, 4 ms (ms2830a-043) auto, 89 ms (ms2830a-044) auto, 86 ms (ms2830a-045) sweep time (time domain) 100 ms auto sweep time select fast auto...

  • Page 248

    Appendix b ms2830a default value list b-6 measure acp on/off off acp reference both sides of carriers offset ch bw 3.84 mhz carrier bw 3.84 mhz in band center center frequency carrier spacing 5 mhz offset-1 on, 5 mhz offset-2 on, 10 mhz offset-3 off, 15 mhz in band filter type root nyquist offset ch...

  • Page 249

    Appendix b ms2830a default value list b-7 a pp en dix a ppe ndi x b spectrum emission mask on/off off limit side both result type peak reference mode channel reference power 0 dbm channel bw 3.84 mhz attenuator auto, 10 db rbw auto/manual manual, 30 khz vbw auto/manual auto, 30 khz vbw mode power sw...

  • Page 250

    Appendix b ms2830a default value list b-8 offset-2 offset on start freq 2.715 mhz stop freq 3.515 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 30 khz vbw auto, 30 khz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001 integrate bw au...

  • Page 251

    Appendix b ms2830a default value list b-9 a pp en dix a ppe ndi x b offset-4 offset on start freq 4 mhz stop freq 8 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 1 mhz vbw auto, 1 mhz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001...

  • Page 252

    Appendix b ms2830a default value list b-10 offset-6 offset off start freq 12.5 mhz stop freq 15 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 1 mhz vbw auto, 30 khz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001 integrate bw auto,...

  • Page 253

    Appendix b ms2830a default value list b-11 a pp en dix a ppe ndi x b segment-1 segment setup segment ms2830a-040 : on ms2830a-041 : on ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 9 khz ms2830a-041 : 9 khz ms2830a-043 : 9 khz ms2830a-044 : 9 khz ms2830a-045 : 9 khz sto...

  • Page 254

    Appendix b ms2830a default value list b-12 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 1 khz ms2830a-041 : on, 1 khz ms2830a-043 : o...

  • Page 255

    Appendix b ms2830a default value list b-13 a pp en dix a ppe ndi x b segment-2 segment setup segment ms2830a-040 : on ms2830a-041 : on ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 150 khz ms2830a-041 : 150 khz ms2830a-043 : 150 khz ms2830a-044 : 150 khz ms2830a-045 : 1...

  • Page 256

    Appendix b ms2830a default value list b-14 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 10 khz ms2830a-041 : on, 10 khz ms2830a-043 :...

  • Page 257

    Appendix b ms2830a default value list b-15 a pp en dix a ppe ndi x b segment-3 segment setup segment ms2830a-040 : on ms2830a-041 : on ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 30 mhz ms2830a-041 : 30 mhz ms2830a-043 : 30 mhz ms2830a-044 : 30 mhz ms2830a-045 : 30 mh...

  • Page 258

    Appendix b ms2830a default value list b-16 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 100 khz ms2830a-041 : on, 100 khz ms2830a-043...

  • Page 259

    Appendix b ms2830a default value list b-17 a pp en dix a ppe ndi x b segment-4 segment setup segment ms2830a-040 : on ms2830a-041 : on ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 1 ghz ms2830a-044 : 1 ghz ms2830a-045 : 1 ghz sto...

  • Page 260

    Appendix b ms2830a default value list b-18 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 1 mhz ms2830a-041 : on, 1 mhz ms2830a-043 : o...

  • Page 261

    Appendix b ms2830a default value list b-19 a pp en dix a ppe ndi x b segment-5 segment setup segment ms2830a-040 : on ms2830a-041 : on ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 2 ghz ms2830a-041 : 2 ghz ms2830a-043 : 2 ghz ms2830a-044 : 2 ghz ms2830a-045 : 2 ghz sto...

  • Page 262

    Appendix b ms2830a default value list b-20 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 1 mhz ms2830a-041 : on, 1 mhz ms2830a-043 : o...

  • Page 263

    Appendix b ms2830a default value list b-21 a pp en dix a ppe ndi x b segment-6 segment setup segment ms2830a-040 : on ms2830a-041 : on ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 3 ghz ms2830a-041 : 3 ghz ms2830a-043 : 3 ghz ms2830a-044 : 3 ghz ms2830a-045 : 3 ghz sto...

  • Page 264

    Appendix b ms2830a default value list b-22 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 1 mhz ms2830a-041 : on, 1 mhz ms2830a-043 : o...

  • Page 265

    Appendix b ms2830a default value list b-23 a pp en dix a ppe ndi x b segment-7 segment setup segment ms2830a-040 : off ms2830a-041 : on ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 4 ghz ms2830a-043 : 4 ghz ms2830a-044 : 4 ghz ms2830a-045 : 4 ghz st...

  • Page 266

    Appendix b ms2830a default value list b-24 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 1 mhz ms2830a-043 : o...

  • Page 267

    Appendix b ms2830a default value list b-25 a pp en dix a ppe ndi x b segment-8 segment setup segment ms2830a-040 : off ms2830a-041 : on ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 5 ghz ms2830a-043 : 5 ghz ms2830a-044 : 5 ghz ms2830a-045 : 5 ghz st...

  • Page 268

    Appendix b ms2830a default value list b-26 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 1 mhz ms2830a-043 : o...

  • Page 269

    Appendix b ms2830a default value list b-27 a pp en dix a ppe ndi x b segment-9 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 6 ghz ms2830a-044 : 6 ghz ms2830a-045 : 6 ghz s...

  • Page 270

    Appendix b ms2830a default value list b-28 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 271

    Appendix b ms2830a default value list b-29 a pp en dix a ppe ndi x b segment-10 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 7 ghz ms2830a-044 : 7 ghz ms2830a-045 : 7 ghz ...

  • Page 272

    Appendix b ms2830a default value list b-30 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 273

    Appendix b ms2830a default value list b-31 a pp en dix a ppe ndi x b segment-11 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 8 ghz ms2830a-044 : 8 ghz ms2830a-045 : 8 ghz ...

  • Page 274

    Appendix b ms2830a default value list b-32 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 275

    Appendix b ms2830a default value list b-33 a pp en dix a ppe ndi x b segment-12 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 9 ghz ms2830a-044 : 9 ghz ms2830a-045 : 9 ghz ...

  • Page 276

    Appendix b ms2830a default value list b-34 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 277

    Appendix b ms2830a default value list b-35 a pp en dix a ppe ndi x b segment-13 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 10 ghz ms2830a-044 : 10 ghz ms2830a-045 : 10 g...

  • Page 278

    Appendix b ms2830a default value list b-36 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 279

    Appendix b ms2830a default value list b-37 a pp en dix a ppe ndi x b segment-14 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 11 ghz ms2830a-044 : 11 ghz ms2830a-045 : 11 g...

  • Page 280

    Appendix b ms2830a default value list b-38 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 281

    Appendix b ms2830a default value list b-39 a pp en dix a ppe ndi x b segment-15 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : on ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 12 ghz ms2830a-044 : 12 ghz ms2830a-045 : 12 g...

  • Page 282

    Appendix b ms2830a default value list b-40 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 283

    Appendix b ms2830a default value list b-41 a pp en dix a ppe ndi x b segment-16 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : off ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 1 ghz ms2830a-044 : 14 ghz ms2830a-045 : 14 g...

  • Page 284

    Appendix b ms2830a default value list b-42 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 285

    Appendix b ms2830a default value list b-43 a pp en dix a ppe ndi x b segment-17 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : off ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 1 ghz ms2830a-044 : 18 ghz ms2830a-045 : 18 g...

  • Page 286

    Appendix b ms2830a default value list b-44 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 287

    Appendix b ms2830a default value list b-45 a pp en dix a ppe ndi x b segment-18 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : off ms2830a-044 : on ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 1 ghz ms2830a-044 : 24 ghz ms2830a-045 : 24 g...

  • Page 288

    Appendix b ms2830a default value list b-46 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 289

    Appendix b ms2830a default value list b-47 a pp en dix a ppe ndi x b segment-19 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : off ms2830a-044 : off ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 1 ghz ms2830a-044 : 1 ghz ms2830a-045 : 32 g...

  • Page 290

    Appendix b ms2830a default value list b-48 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 291

    Appendix b ms2830a default value list b-49 a pp en dix a ppe ndi x b segment-20 segment setup segment ms2830a-040 : off ms2830a-041 : off ms2830a-043 : off ms2830a-044 : off ms2830a-045 : on start freq ms2830a-040 : 1 ghz ms2830a-041 : 1 ghz ms2830a-043 : 1 ghz ms2830a-044 : 1 ghz ms2830a-045 : 42 g...

  • Page 292

    Appendix b ms2830a default value list b-50 pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2830a-040 : on, 3 mhz ms2830a-041 : on, 3 mhz ms2830a-043 : o...

  • Page 293

    Appendix b ms2830a default value list b-51 a pp en dix a ppe ndi x b signal generator control on/off off sg output level –40 dbm (except below) –136 dbm (with ms2830a-022/122) sg output on/off off.

  • Page 294

    Appendix b ms2830a default value list b-52..

  • Page 295: Ms2840A

    C-1 a pp en dix a ppe ndi x c appendix c ms2840a default value list ms2840a frequency center 1.8 ghz (ms2840a-040) 3 ghz (ms2840a-041) 13.25 ghz (ms2840a-044) 22.25 ghz (ms2840a-046) start 0 hz stop 3.6 ghz (ms2840a-040) 6 ghz (ms2840a-041) 26.5 ghz (ms2840a-044) 44.5 ghz (ms2840a-046) switching spe...

  • Page 296

    Appendix c ms2840a default value list c-2 offset off, 0 db pre-amp off noise floor reduction off bw rbw auto, 3 mhz vbw auto, 3 mhz vbw mode power marker active marker marker1 marker mode normal zone width 360 mhz (ms2840a-040) 600 mhz (ms2840a-041) 2.65 ghz (ms2840a-044) 4.45 ghz (ms2840a-046) mark...

  • Page 297

    Appendix c ms2840a default value list c-3 a pp en dix a ppe ndi x c trace-c storage mode off trace-d storage mode off trace-e storage mode off trace-f storage mode off storage count 10 limits limit 1 to 6 type on limit display off limit test off margin off margin value 0 db edit point 1 frequency ce...

  • Page 298

    Appendix c ms2840a default value list c-4 trigger/gate trigger switch off trigger source video trigger slope rise trigger level (video) − 40 dbm trigger level (wide if video) −20 dbm trigger hold off trigger hold 100 µ s trigger delay 0 s gate sweep off gate view off gate delay 0 s gate length 1.0 m...

  • Page 299

    Appendix c ms2840a default value list c-5 a pp en dix a ppe ndi x c time/sweep sweep time (frequency domain) auto, 1 ms (ms2840a-040) auto, 2 ms (ms2840a-041) auto, 89 ms (ms2840a-044) auto, 86 ms (ms2840a-046) sweep time (time domain) 100 ms auto sweep time select fast auto sweep type rules dynamic...

  • Page 300

    Appendix c ms2840a default value list c-6 measure acp on/off off acp reference both sides of carriers offset ch bw 3.84 mhz carrier bw 3.84 mhz in band center center frequency carrier spacing 5 mhz offset-1 on, 5 mhz offset-2 on, 10 mhz offset-3 off, 15 mhz in band filter type root nyquist offset ch...

  • Page 301

    Appendix c ms2840a default value list c-7 a pp en dix a ppe ndi x c spectrum emission mask on/off off limit side both result type peak reference mode channel reference power 0 dbm channel bw 3.84 mhz attenuator auto, 10 db rbw auto/manual manual, 30 khz vbw auto/manual auto, 30 khz vbw mode power sw...

  • Page 302

    Appendix c ms2840a default value list c-8 offset-2 offset on start freq 2.715 mhz stop freq 3.515 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 30 khz vbw auto, 30 khz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001 integrate bw au...

  • Page 303

    Appendix c ms2840a default value list c-9 app endi x a ppendix c offset-4 offset on start freq 4 mhz stop freq 8 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 1 mhz vbw auto, 1 mhz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001 in...

  • Page 304

    Appendix c ms2840a default value list c-10 offset-6 offset off start freq 12.5 mhz stop freq 15 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 1 mhz vbw auto, 30 khz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001 integrate bw auto,...

  • Page 305

    Appendix c ms2840a default value list c-11 a pp en dix a ppe ndi x c segment-1 segment setup segment ms2840a-040 : on ms2840a-041 : on ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 9 khz ms2840a-041 : 9 khz ms2840a-044 : 9 khz ms2840a-046 : 9 khz stop freq ms2840a-040 : 150 khz ms2840a-...

  • Page 306

    Appendix c ms2840a default value list c-12 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 1 khz ms2840a-041 : on, 1 khz ms2840a-044 : on, 1 khz ms2840a-046 : on, 1 khz couple segment vbw ms2840a-040 : on, 1 khz ms2840a-041 : on, 1 khz ms2840a-04...

  • Page 307

    Appendix c ms2840a default value list c-13 a pp en dix a ppe ndi x c segment-2 segment setup segment ms2840a-040 : on ms2840a-041 : on ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 150 khz ms2840a-041 : 150 khz ms2840a-044 : 150 khz ms2840a-046 : 150 khz stop freq ms2840a-040 : 30 mhz m...

  • Page 308

    Appendix c ms2840a default value list c-14 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 10 khz ms2840a-041 : on, 10 khz ms2840a-044 : on, 10 khz ms2840a-046 : on, 10 khz couple segment vbw ms2840a-040 : on, 10 khz ms2840a-041 : on, 10 khz ms28...

  • Page 309

    Appendix c ms2840a default value list c-15 a pp en dix a ppe ndi x c segment-3 segment setup segment ms2840a-040 : on ms2840a-041 : on ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 30 mhz ms2840a-041 : 30 mhz ms2840a-044 : 30 mhz ms2840a-046 : 30 mhz stop freq ms2840a-040 : 1 ghz ms2840...

  • Page 310

    Appendix c ms2840a default value list c-16 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 100 khz ms2840a-041 : on, 100 khz ms2840a-044 : on, 100 khz ms2840a-046 : on, 100 khz couple segment vbw ms2840a-040 : on, 100 khz ms2840a-041 : on, 100 kh...

  • Page 311

    Appendix c ms2840a default value list c-17 a pp en dix a ppe ndi x c segment-4 segment setup segment ms2840a-040 : on ms2840a-041 : on ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 1 ghz ms2840a-046 : 1 ghz stop freq ms2840a-040 : 2 ghz ms2840a-04...

  • Page 312

    Appendix c ms2840a default value list c-18 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 1 mhz ms2840a-041 : on, 1 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 1 mhz ms2840a-041 : on, 1 mhz ms2840a-04...

  • Page 313

    Appendix c ms2840a default value list c-19 a pp en dix a ppe ndi x c segment-5 segment setup segment ms2840a-040 : on ms2840a-041 : on ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 2 ghz ms2840a-041 : 2 ghz ms2840a-044 : 2 ghz ms2840a-046 : 2 ghz stop freq ms2840a-040 : 3 ghz ms2840a-04...

  • Page 314

    Appendix c ms2840a default value list c-20 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 1 mhz ms2840a-041 : on, 1 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 1 mhz ms2840a-041 : on, 1 mhz ms2840a-04...

  • Page 315

    Appendix c ms2840a default value list c-21 a pp en dix a ppe ndi x c segment-6 segment setup segment ms2840a-040 : on ms2840a-041 : on ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 3 ghz ms2840a-041 : 3 ghz ms2840a-044 : 3 ghz ms2840a-046 : 3 ghz stop freq ms2840a-040 : 3.6 ghz ms2840a-...

  • Page 316

    Appendix c ms2840a default value list c-22 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 1 mhz ms2840a-041 : on, 1 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 1 mhz ms2840a-041 : on, 1 mhz ms2840a-04...

  • Page 317

    Appendix c ms2840a default value list c-23 a pp en dix a ppe ndi x c segment-7 segment setup segment ms2840a-040 : off ms2840a-041 : on ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 4 ghz ms2840a-044 : 4 ghz ms2840a-046 : 4 ghz stop freq ms2840a-040 : 3.6 ghz ms2840a...

  • Page 318

    Appendix c ms2840a default value list c-24 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 1 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 1 mhz ms2840a-04...

  • Page 319

    Appendix c ms2840a default value list c-25 a pp en dix a ppe ndi x c segment-8 segment setup segment ms2840a-040 : off ms2840a-041 : on ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 5 ghz ms2840a-044 : 5 ghz ms2840a-046 : 5 ghz stop freq ms2840a-040 : 3.6 ghz ms2840a...

  • Page 320

    Appendix c ms2840a default value list c-26 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 1 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 1 mhz ms2840a-04...

  • Page 321

    Appendix c ms2840a default value list c-27 a pp en dix a ppe ndi x c segment-9 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 6 ghz ms2840a-046 : 6 ghz stop freq ms2840a-040 : 3.6 ghz ms2840...

  • Page 322

    Appendix c ms2840a default value list c-28 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 323

    Appendix c ms2840a default value list c-29 a pp en dix a ppe ndi x c segment-10 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 7 ghz ms2840a-046 : 7 ghz stop freq ms2840a-040 : 3.6 ghz ms284...

  • Page 324

    Appendix c ms2840a default value list c-30 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 325

    Appendix c ms2840a default value list c-31 a pp en dix a ppe ndi x c segment-11 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 8 ghz ms2840a-046 : 8 ghz stop freq ms2840a-040 : 3.6 ghz ms284...

  • Page 326

    Appendix c ms2840a default value list c-32 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 327

    Appendix c ms2840a default value list c-33 a pp en dix a ppe ndi x c segment-12 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 9 ghz ms2840a-046 : 9 ghz stop freq ms2840a-040 : 3.6 ghz ms284...

  • Page 328

    Appendix c ms2840a default value list c-34 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 329

    Appendix c ms2840a default value list c-35 a pp en dix a ppe ndi x c segment-13 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 10 ghz ms2840a-046 : 10 ghz stop freq ms2840a-040 : 3.6 ghz ms2...

  • Page 330

    Appendix c ms2840a default value list c-36 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 331

    Appendix c ms2840a default value list c-37 a pp en dix a ppe ndi x c segment-14 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 11 ghz ms2840a-046 : 11 ghz stop freq ms2840a-040 : 3.6 ghz ms2...

  • Page 332

    Appendix c ms2840a default value list c-38 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 333

    Appendix c ms2840a default value list c-39 a pp en dix a ppe ndi x c segment-15 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 12 ghz ms2840a-046 : 12 ghz stop freq ms2840a-040 : 3.6 ghz ms2...

  • Page 334

    Appendix c ms2840a default value list c-40 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 335

    Appendix c ms2840a default value list c-41 a pp en dix a ppe ndi x c segment-16 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 14 ghz ms2840a-046 : 14 ghz stop freq ms2840a-040 : 3.6 ghz ms2...

  • Page 336

    Appendix c ms2840a default value list c-42 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 337

    Appendix c ms2840a default value list c-43 a pp en dix a ppe ndi x c segment-17 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 18 ghz ms2840a-046 : 18 ghz stop freq ms2840a-040 : 3.6 ghz ms2...

  • Page 338

    Appendix c ms2840a default value list c-44 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 339

    Appendix c ms2840a default value list c-45 a pp en dix a ppe ndi x c segment-18 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : on ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 24 ghz ms2840a-046 : 24 ghz stop freq ms2840a-040 : 3.6 ghz ms2...

  • Page 340

    Appendix c ms2840a default value list c-46 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 1 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 341

    Appendix c ms2840a default value list c-47 a pp en dix a ppe ndi x c segment-19 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : off ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 1 ghz ms2840a-046 : 32 ghz stop freq ms2840a-040 : 3.6 ghz ms2...

  • Page 342

    Appendix c ms2840a default value list c-48 search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : on, 3 mhz ms2840a-046 : on, 1 mhz couple segment vbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-04...

  • Page 343

    Appendix c ms2840a default value list c-49 a pp en dix a ppe ndi x c segment-20 segment setup segment ms2840a-040 : off ms2840a-041 : off ms2840a-044 : off ms2840a-046 : on start freq ms2840a-040 : 1 ghz ms2840a-041 : 1 ghz ms2840a-044 : 1 ghz ms2840a-046 : 42 ghz stop freq ms2840a-040 : 3.6 ghz ms2...

  • Page 344

    Appendix c ms2840a default value list c-50. Pause before sweep off correction common preamp off limit setup start level − 13 dbm stop level auto, −13 dbm search resolution 6 db threshold level −90 dbm time domain setup couple segment rbw ms2840a-040 : on, 3 mhz ms2840a-041 : on, 3 mhz ms2840a-044 : ...

  • Page 345: Ms2850A

    D-1 app endi x a ppendix d appendix d ms2850a default value list ms2850a frequency center 16 ghz (ms2850a-047) 22.25 ghz (ms2850a-046) start 0 hz stop 32 ghz (ms2850a-047) 44.5 ghz (ms2850a-046) switching speed normal (best phase noise) preselector auto tune off offset off, 0 hz step size 1 ghz exte...

  • Page 346

    Appendix d ms2850a default value list d-2 bw rbw auto, 3 mhz vbw auto, 3 mhz vbw mode power marker active marker marker1 marker mode normal zone width 3.2 ghz (ms2850a-047) 4.45 ghz (ms2850a-046) marker trace a marker result peak marker type zone couple zone on spot line on marker list off frequency...

  • Page 347

    Appendix d ms2850a default value list d-3 app endi x a ppendix d limits limit 1 to 6 type on limit display off limit test off margin off margin value 0 db edit point 1 frequency center frequency connected to previous pt on previous pt level offset 0.0 db envelope points 41 offset 3.0 db shape slope ...

  • Page 348

    Appendix d ms2850a default value list d-4 trigger/gate trigger switch off trigger source video trigger slope rise trigger level (video) 40 dbm trigger level (wide if video) 20 dbm trigger hold off trigger hold 100 s trigger delay 0 s gate sweep off gate view off gate delay 0 s gate length 1.0 ms g...

  • Page 349

    Appendix d ms2850a default value list d-5 app endi x a ppendix d time/sweep sweep time (frequency domain) auto, 89 ms (ms2850a-047) auto, 86 ms (ms2850a-046) sweep time (time domain) 100 ms auto sweep time select fast auto sweep type rules dynamic range fft width ≤ 40 khz trace point 10001 peak sear...

  • Page 350

    Appendix d ms2850a default value list d-6 measure acp on/off off acp reference both sides of carriers offset ch bw 3.84 mhz carrier bw 3.84 mhz in band center center frequency carrier spacing 5 mhz offset-1 on, 5 mhz offset-2 on, 10 mhz offset-3 off, 15 mhz in band filter type root nyquist offset ch...

  • Page 351

    Appendix d ms2850a default value list d-7 app endi x a ppendix d spectrum emission mask on/off off limit side both result type peak reference mode channel reference power 0 dbm channel bw 3.84 mhz attenuator auto, 10 db rbw auto/manual manual, 30 khz vbw auto/manual auto, 30 khz vbw mode power sweep...

  • Page 352

    Appendix d ms2850a default value list d-8 offset-2 offset on start freq 2.715 mhz stop freq 3.515 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 30 khz vbw auto, 30 khz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001 integrate bw au...

  • Page 353

    Appendix d ms2850a default value list d-9 app endi x a ppendix d offset-4 offset on start freq 4 mhz stop freq 8 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 1 mhz vbw auto, 1 mhz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001 in...

  • Page 354

    Appendix d ms2850a default value list d-10 offset-6 offset off start freq 12.5 mhz stop freq 15 mhz reference level auto, 0 dbm attenuator auto, 10 db rbw manual, 1 mhz vbw auto, 30 khz vbw mode power sweep time auto, 1 ms auto sweep time select fast detection rms trace point 1001 integrate bw auto,...

  • Page 355

    Appendix d ms2850a default value list d-11 app endi x a ppendix d segment-1 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 9 khz ms2850a-046 : 9 khz stop freq ms2850a-047 : 150 khz ms2850a-046 : 150 khz reference level 0 dbm attenuator auto, 10 db detection positive...

  • Page 356

    Appendix d ms2850a default value list d-12 segment-2 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 150 khz ms2850a-046 : 150 khz stop freq ms2850a-047 : 30 mhz ms2850a-046 : 30 mhz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : ma...

  • Page 357

    Appendix d ms2850a default value list d-13 app endi x a ppendix d segment-3 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 30 mhz ms2850a-046 : 30 mhz stop freq ms2850a-047 : 1 ghz ms2850a-046 : 1 ghz reference level 0 dbm attenuator auto, 10 db detection positive r...

  • Page 358

    Appendix d ms2850a default value list d-14 segment-4 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 1 ghz ms2850a-046 : 1 ghz stop freq ms2850a-047 : 2 ghz ms2850a-046 : 2 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : manual, ...

  • Page 359

    Appendix d ms2850a default value list d-15 app endi x a ppendix d segment-5 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 2 ghz ms2850a-046 : 2 ghz stop freq ms2850a-047 : 3 ghz ms2850a-046 : 3 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw...

  • Page 360

    Appendix d ms2850a default value list d-16 segment-6 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 3 ghz ms2850a-046 : 3 ghz stop freq ms2850a-047 : 4 ghz ms2850a-046 : 4 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : manual, ...

  • Page 361

    Appendix d ms2850a default value list d-17 app endi x a ppendix d segment-7 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 4 ghz ms2850a-046 : 4 ghz stop freq ms2850a-047 : 5 ghz ms2850a-046 : 5 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw...

  • Page 362

    Appendix d ms2850a default value list d-18 segment-8 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 5 ghz ms2850a-046 : 5 ghz stop freq ms2850a-047 : 6 ghz ms2850a-046 : 6 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : manual, ...

  • Page 363

    Appendix d ms2850a default value list d-19 app endi x a ppendix d segment-9 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 6 ghz ms2850a-046 : 6 ghz stop freq ms2850a-047 : 7 ghz ms2850a-046 : 7 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw...

  • Page 364

    Appendix d ms2850a default value list d-20 segment-10 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 7 ghz ms2850a-046 : 7 ghz stop freq ms2850a-047 : 8 ghz ms2850a-046 : 8 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : manual,...

  • Page 365

    Appendix d ms2850a default value list d-21 app endi x a ppendix d segment-11 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 8 ghz ms2850a-046 : 8 ghz stop freq ms2850a-047 : 9 ghz ms2850a-046 : 9 ghz reference level 0 dbm attenuator auto, 10 db detection positive rb...

  • Page 366

    Appendix d ms2850a default value list d-22 segment-12 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 9 ghz ms2850a-046 : 9 ghz stop freq ms2850a-047 : 10 ghz ms2850a-046 : 10 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : manua...

  • Page 367

    Appendix d ms2850a default value list d-23 app endi x a ppendix d segment-13 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 10 ghz ms2850a-046 : 10 ghz stop freq ms2850a-047 : 11 ghz ms2850a-046 : 11 ghz reference level 0 dbm attenuator auto, 10 db detection positiv...

  • Page 368

    Appendix d ms2850a default value list d-24 segment-14 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 11 ghz ms2850a-046 : 11 ghz stop freq ms2850a-047 : 12 ghz ms2850a-046 : 12 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : man...

  • Page 369

    Appendix d ms2850a default value list d-25 app endi x a ppendix d segment-15 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 12 ghz ms2850a-046 : 12 ghz stop freq ms2850a-047 : 14 ghz ms2850a-046 : 14 ghz reference level 0 dbm attenuator auto, 10 db detection positiv...

  • Page 370

    Appendix d ms2850a default value list d-26 segment-16 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 14 ghz ms2850a-046 : 14 ghz stop freq ms2850a-047 : 18 ghz ms2850a-046 : 18 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : man...

  • Page 371

    Appendix d ms2850a default value list d-27 app endi x a ppendix d segment-17 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 18 ghz ms2850a-046 : 18 ghz stop freq ms2850a-047 : 24 ghz ms2850a-046 : 24 ghz reference level 0 dbm attenuator auto, 10 db detection positiv...

  • Page 372

    Appendix d ms2850a default value list d-28 segment-18 segment setup segment ms2850a-047 : on ms2850a-046 : on start freq ms2850a-047 : 24 ghz ms2850a-046 : 24 ghz stop freq ms2850a-047 : 26.5 ghz ms2850a-046 : 32 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 : m...

  • Page 373

    Appendix d ms2850a default value list d-29 app endi x a ppendix d segment-19 segment setup segment ms2850a-047 : off ms2850a-046 : on start freq ms2850a-047 : 1 ghz ms2850a-046 : 32 ghz stop freq ms2850a-047 : 26.5 ghz ms2850a-046 : 42 ghz reference level 0 dbm attenuator auto, 10 db detection posit...

  • Page 374

    Appendix d ms2850a default value list d-30 segment-20 segment setup segment ms2850a-047 : off ms2850a-046 : on start freq ms2850a-047 : 1 ghz ms2850a-046 : 42 ghz stop freq ms2850a-047 : 26.5 ghz ms2850a-046 : 44.5 ghz reference level 0 dbm attenuator auto, 10 db detection positive rbw ms2850a-047 :...

  • Page 375

    Appendix d ms2850a default value list d-31 app endi x a ppendix d toi on/off off tone frequency auto manual auto lower tone frequency 5.062500000 ghz upper tone frequency 8.437500000 ghz im3 frequency search on/off off zero span measurement on/off off zero span bandwidth auto/manual auto zero span b...

  • Page 376

    Appendix d ms2850a default value list d-32..

  • Page 377

    E-1 ap p endix a ppendix e appendix e standard parameter list the parameters set by the standard functions are listed below. E.1 acp ............................................................................... E-3 5g pre-standard .......................................................... E-3 w-cd...

  • Page 378

    Appendix e standard parameter list e-2 lte/lte tdd uplink ................................................ E-212 td-scdma .............................................................. E-264 xg-phs .................................................................... E-294 cdma2000 .....................

  • Page 379: E.1 Acp

    E.1 acp e-3 ap p endix a ppendix e e.1 acp 5g pre-standard table e.1-1 standard parameters for acp function standard parameter name setting 5g pre-standard (99 mhz 1 carrier) frequency span 500 mhz rbw 300 khz detection rms swp auto, normal trace point 10001 acp reference carrier select carrier numb...

  • Page 380

    Appendix e standard parameter list e-4 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting 5g pre-standard (100 mhz 1 carrier) frequency span 500 mhz rbw 300 khz detection rms swp auto, normal trace point 10001 acp reference carrier select carrier number 1 carri...

  • Page 381

    E.1 acp e-5 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting 5g pre-standard (99 mhz 2 carrier) frequency span 600 mhz rbw 300 khz detection rms swp auto, normal trace point 10001 acp reference carrier select carrier number 2 carrier bw...

  • Page 382

    Appendix e standard parameter list e-6 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting 5g pre-standard (100 mhz 2 carrier) frequency span 600 mhz rbw 300 khz detection rms swp auto, normal trace point 10001 acp reference carrier select carrier number 2 carri...

  • Page 383

    E.1 acp e-7 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting 5g pre-standard (99 mhz 4 carrier) frequency span 800 mhz rbw 300 khz detection rms swp auto, normal trace point 10001 acp reference carrier select carrier number 4 carrier bw...

  • Page 384

    Appendix e standard parameter list e-8 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting 5g pre-standard (100 mhz 4 carrier) frequency span 800 mhz rbw 300 khz detection rms swp auto, normal trace point 10001 acp reference carrier select carrier number 4 carri...

  • Page 385

    E.1 acp e-9 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting 5g pre-standard (99 mhz 8 carrier) frequency span 1.2 ghz rbw 300 khz detection rms swp auto, normal trace point 10001 acp reference carrier select carrier number 8 carrier bw...

  • Page 386

    Appendix e standard parameter list e-10 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting 5g pre-standard (100 mhz 8 carrier) frequency span 1.2 ghz rbw 300 khz detection rms swp auto, normal trace point 10001 acp reference carrier select carrier number 8 carr...

  • Page 387: W-Cdma

    E.1 acp e-11 ap p endix a ppendix e w-cdma table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting w-cdma uplink frequency span 25 mhz rbw 30 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier number 1 carri...

  • Page 388

    Appendix e standard parameter list e-12 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting w-cdma downlink (single carrier) frequency span 25 mhz rbw 30 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrie...

  • Page 389

    E.1 acp e-13 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting w-cdma downlink (2 carriers) frequency span 30 mhz rbw 30 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference both sides of carriers c...

  • Page 390

    Appendix e standard parameter list e-14 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting w-cdma downlink (3 carriers) frequency span 35 mhz rbw 30 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference both sides of carrie...

  • Page 391

    E.1 acp e-15 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting w-cdma downlink (4 carriers) frequency span 40 mhz rbw 30 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference both sides of carriers c...

  • Page 392: Mobile Wimax

    Appendix e standard parameter list e-16 mobile wimax table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting mobile wimax dl / ul 10mhz bw frequency span 50 mhz rbw 30 khz vbw 100 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp refe...

  • Page 393

    E.1 acp e-17 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting mobile wimax dl / ul 5mhz bw frequency span 25 mhz rbw 30 khz vbw 100 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 ca...

  • Page 394: Lte

    Appendix e standard parameter list e-18 lte table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 1.4mhz bw (utra 5mhz) trace points 1001 span frequency 21.4 mhz rbw 10 khz detection rms sweep time switch auto auto sweep time select normal acp ...

  • Page 395

    E.1 acp e-19 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 1.4mhz bw (utra 1.6mhz) trace points 1001 span frequency 7.8 mhz rbw 10 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 396

    Appendix e standard parameter list e-20 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 1.4mhz bw (e-utra 1.4mhz) trace points 1001 span frequency 7 mhz rbw 10 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 397

    E.1 acp e-21 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 1.4mhz bw (e-utra 1.4mhz) trace points 1001 span frequency 7 mhz rbw 10 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 398

    Appendix e standard parameter list e-22 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 1.4mhz bw (adv mode) trace points 1001 span frequency 10 mhz rbw 10 khz detection rms sweep time switch auto auto sweep time select normal acp reference ...

  • Page 399

    E.1 acp e-23 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 1.4mhz bw (adv mode) (cont’d) bw offset-1 1.095 mhz bw offset-2 1.095 mhz bw offset-3 1.28 mhz bw offset-4 1.28 mhz bw offset-5 1.28 mhz bw offset-6 1.28 mhz...

  • Page 400

    Appendix e standard parameter list e-24 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 3mhz bw (utra 5mhz) trace points 1001 span frequency 23 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp referenc...

  • Page 401

    E.1 acp e-25 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 3mhz bw (utra 1.6mhz) trace points 1001 span frequency 9.4 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp refer...

  • Page 402

    Appendix e standard parameter list e-26 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 3mhz bw (e-utra 3mhz) trace points 1001 span frequency 15 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp refere...

  • Page 403

    E.1 acp e-27 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 3mhz bw (e-utra 3mhz) trace points 1001 span frequency 15 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp refere...

  • Page 404

    Appendix e standard parameter list e-28 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 3mhz bw (adv mode) trace points 1001 span frequency 20 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference ca...

  • Page 405

    E.1 acp e-29 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 3mhz bw (adv mode) (cont’d) bw offset-1 4.515 mhz bw offset-2 4.515 mhz bw offset-3 1.28 mhz bw offset-4 1.28 mhz bw offset-5 1.28 mhz bw offset-6 1.28 mhz b...

  • Page 406

    Appendix e standard parameter list e-30 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 5mhz bw (utra 5mhz) trace points 1001 span frequency 25 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp referenc...

  • Page 407

    E.1 acp e-31 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 5mhz bw (utra 1.6mhz) trace points 1001 span frequency 11.4 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp refe...

  • Page 408

    Appendix e standard parameter list e-32 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 5mhz bw (utra 5mhz) trace points 1001 span frequency 25 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference c...

  • Page 409

    E.1 acp e-33 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 5mhz bw (utra 10mhz) trace points 1001 span frequency 45 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference carr...

  • Page 410

    Appendix e standard parameter list e-34 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 5mhz bw (e-utra 5mhz) trace points 1001 span frequency 25 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp refere...

  • Page 411

    E.1 acp e-35 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 5mhz bw (e-utra 5mhz) trace points 1001 span frequency 25 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp refere...

  • Page 412

    Appendix e standard parameter list e-36 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 5mhz bw (adv mode) trace points 1001 span frequency 45 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference ca...

  • Page 413

    E.1 acp e-37 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 5mhz bw (adv mode) (cont’d) bw offset-1 4.515 mhz bw offset-2 4.515 mhz bw offset-3 1.28 mhz bw offset-4 1.28 mhz bw offset-5 3.84 mhz bw offset-6 3.84 mhz b...

  • Page 414

    Appendix e standard parameter list e-38 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 10mhz bw (utra 5mhz) trace points 1001 span frequency 30 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp referen...

  • Page 415

    E.1 acp e-39 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 10mhz bw (utra 1.6mhz) trace points 1001 span frequency 16.4 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 416

    Appendix e standard parameter list e-40 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 10mhz bw (utra 5mhz) trace points 1001 span frequency 30 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference ...

  • Page 417

    E.1 acp e-41 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 10mhz bw (utra 10mhz) trace points 1001 span frequency 50 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference car...

  • Page 418

    Appendix e standard parameter list e-42 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 10mhz bw (e-utra 10mhz) trace points 1001 span frequency 50 mhz rbw 100 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 419

    E.1 acp e-43 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 10mhz bw (e-utra 10mhz) trace points 1001 span frequency 50 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp refe...

  • Page 420

    Appendix e standard parameter list e-44 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 10mhz bw (adv mode) trace points 1001 span frequency 50 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference c...

  • Page 421

    E.1 acp e-45 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 10mhz bw (adv mode) (cont’d) bw offset-1 9.015 mhz bw offset-2 9.015 mhz bw offset-3 1.28 mhz bw offset-4 1.28 mhz bw offset-5 3.84 mhz bw offset-6 3.84 mhz ...

  • Page 422

    Appendix e standard parameter list e-46 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 15mhz bw (utra 5mhz) trace points 1001 span frequency 35 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp referen...

  • Page 423

    E.1 acp e-47 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 15mhz bw (utra 1.6mhz) trace points 1001 span frequency 21.4 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 424

    Appendix e standard parameter list e-48 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 15mhz bw (utra 5mhz) trace points 1001 span frequency 35 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference ...

  • Page 425

    E.1 acp e-49 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 15mhz bw (utra 10mhz) trace points 1001 span frequency 55 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference car...

  • Page 426

    Appendix e standard parameter list e-50 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 15mhz bw (e-utra 15mhz) trace points 1001 span frequency 75 mhz rbw 100 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 427

    E.1 acp e-51 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 15mhz bw (e-utra 15mhz) trace points 1001 span frequency 75 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp refe...

  • Page 428

    Appendix e standard parameter list e-52 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 15mhz bw (adv mode) trace points 1001 span frequency 75 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference c...

  • Page 429

    E.1 acp e-53 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 15mhz bw (adv mode) (cont’d) bw offset-1 13.515 mhz bw offset-2 13.515 mhz bw offset-3 1.28 mhz bw offset-4 1.28 mhz bw offset-5 3.84 mhz bw offset-6 3.84 mh...

  • Page 430

    Appendix e standard parameter list e-54 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 20mhz bw (utra 5mhz) trace points 1001 span frequency 40 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp referen...

  • Page 431

    E.1 acp e-55 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 20mhz bw (utra 1.6mhz) trace points 1001 span frequency 26.4 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 432

    Appendix e standard parameter list e-56 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 20mhz bw (utra 5mhz) trace points 1001 span frequency 40 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference ...

  • Page 433

    E.1 acp e-57 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 20mhz bw (utra 10mhz) trace points 1001 span frequency 60 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference car...

  • Page 434

    Appendix e standard parameter list e-58 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte uplink/downlink 20mhz bw (e-utra 20mhz) trace points 1001 span frequency 100 mhz rbw 100 khz detection rms sweep time switch auto auto sweep time select normal acp re...

  • Page 435

    E.1 acp e-59 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd uplink/downlink 20mhz bw (e-utra 20mhz) trace points 1001 span frequency 100 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp ref...

  • Page 436

    Appendix e standard parameter list e-60 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 20mhz bw (adv mode) trace points 1001 span frequency 100 mhz rbw 30 khz detection rms sweep time switch auto auto sweep time select normal acp reference ...

  • Page 437

    E.1 acp e-61 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting lte tdd downlink 20mhz bw (adv mode) (cont’d) bw offset-1 18.015 mhz bw offset-2 18.015 mhz bw offset-3 1.28 mhz bw offset-4 1.28 mhz bw offset-5 3.84 mhz bw offset-6 3.84 mh...

  • Page 438: Dsrc

    Appendix e standard parameter list e-62 dsrc table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting dsrc /4dqpsk trace points 1001 span frequency 25 mhz rbw 30 khz vbw 100 khz vbw mode power detection positive sweep time freq. Domain 7.1 s auto sweep time select n...

  • Page 439

    E.1 acp e-63 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting dsrc ask trace points 1001 span frequency 25 mhz rbw 30 khz vbw 100 khz vbw mode power detection positive sweep time freq. Domain 7.1 s auto sweep time select normal acp refe...

  • Page 440: Td-Scdma

    Appendix e standard parameter list e-64 td-scdma table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (single carrier) trace points 1001 span frequency 8 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time...

  • Page 441

    E.1 acp e-65 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (2 carriers) trace points 1001 span frequency 10 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select normal a...

  • Page 442

    Appendix e standard parameter list e-66 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (3 carriers) trace points 1001 span frequency 12 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select norm...

  • Page 443

    E.1 acp e-67 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (4 carriers) trace points 1001 span frequency 13 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select normal a...

  • Page 444

    Appendix e standard parameter list e-68 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (5 carriers) trace points 1001 span frequency 15 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select norm...

  • Page 445

    E.1 acp e-69 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (6 carriers) trace points 1001 span frequency 16 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select normal a...

  • Page 446

    Appendix e standard parameter list e-70 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (7 carriers) trace points 1001 span frequency 18 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select norm...

  • Page 447

    E.1 acp e-71 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (8 carriers) trace points 1001 span frequency 20 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select normal a...

  • Page 448

    Appendix e standard parameter list e-72 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (9 carriers) trace points 1001 span frequency 21 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select norm...

  • Page 449

    E.1 acp e-73 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (10 carriers) trace points 1001 span frequency 23 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select normal ...

  • Page 450

    Appendix e standard parameter list e-74 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (11 carriers) trace points 1001 span frequency 25 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select nor...

  • Page 451

    E.1 acp e-75 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting td-scdma (12 carriers) trace points 1001 span frequency 26 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676 ms auto sweep time select normal ...

  • Page 452: Cdma2000

    Appendix e standard parameter list e-76 cdma2000 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting cdma2000 forward link trace points 1001 span frequency 4.05 mhz rbw 30 khz detection rms sweep time freq. Domain 1.25 s auto sweep time select normal acp referen...

  • Page 453: Ev-Do

    E.1 acp e-77 ap p endix a ppendix e ev-do table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting ev-do forward link trace points 1001 span frequency 4.05 mhz rbw 30 khz detection rms sweep time freq. Domain 1.667 s auto sweep time select normal acp reference carrie...

  • Page 454: Telec-T403

    Appendix e standard parameter list e-78 telec-t403 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting telec-t403 18mhz span (wlan) frequency span 100 mhz rbw 300 khz detection positive swp auto, normal trace point 1001 adjacent channel power on acp reference ca...

  • Page 455

    E.1 acp e-79 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting telec-t403 19mhz span (wlan) frequency span 100 mhz rbw 300 khz detection positive swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier...

  • Page 456

    Appendix e standard parameter list e-80 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting telec-t403 38mhz span (wlan) frequency span 200 mhz rbw 300 khz detection positive swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 car...

  • Page 457

    E.1 acp e-81 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting telec-t403 78mhz span (wlan) frequency span 400 mhz rbw 300 khz detection positive swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier...

  • Page 458: Telec-T405

    Appendix e standard parameter list e-82 telec-t405 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting telec-t405 20mhz bw (wlan) frequency span 100 mhz rbw 30 khz detection positive swp auto, normal trace point 1001 adjacent channel power on acp reference carri...

  • Page 459

    E.1 acp e-83 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting telec-t405 40mhz bw (wlan) frequency span 200 mhz rbw 30 khz detection positive swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier nu...

  • Page 460: Bpsk

    Appendix e standard parameter list e-84 bpsk table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting bpsk 950mhz (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier numb...

  • Page 461: Gfsk

    E.1 acp e-85 ap p endix a ppendix e gfsk table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 50ksps 950mhz (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier n...

  • Page 462

    Appendix e standard parameter list e-86 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 100ksps 950mhz (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier n...

  • Page 463

    E.1 acp e-87 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 200ksps 950mhz (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier numbe...

  • Page 464

    Appendix e standard parameter list e-88 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 50ksps 920mhz (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier nu...

  • Page 465

    E.1 acp e-89 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 100ksps 920mhz (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier numbe...

  • Page 466

    Appendix e standard parameter list e-90 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 200ksps 920mhz (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier n...

  • Page 467

    E.1 acp e-91 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 50ksps 802.15.4gd7 (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier n...

  • Page 468

    Appendix e standard parameter list e-92 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 100ksps 802.15.4gd7 (lr-wpans) frequency span 2 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carr...

  • Page 469

    E.1 acp e-93 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting gfsk 200ksps 802.15.4gd7 (lr-wpans) frequency span 3 mhz rbw 10 khz detection rms swp auto, normal trace point 1001 adjacent channel power on acp reference carrier-1 carrier ...

  • Page 470: Apco

    Appendix e standard parameter list e-94 apco table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting apco p25 except 700mhz-band frequency span 100 khz rbw 100 hz detection rms storage mode average sweep time switch auto auto sweep time select normal adjacent channe...

  • Page 471

    E.1 acp e-95 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting apco p25 700mhz-bw-6.2 5khz frequency span 100 khz rbw 100 hz detection rms storage mode average sweep time switch auto auto sweep time select normal adjacent channel power o...

  • Page 472

    Appendix e standard parameter list e-96 table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting apco p25 700mhz-bw-25k hz frequency span 250 khz rbw 100 hz detection rms storage mode average sweep time switch auto auto sweep time select normal adjacent channel power...

  • Page 473

    E.1 acp e-97 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting apco p25 700mhz-bw-100 khz frequency span 1 mhz rbw 100 hz detection rms storage mode average sweep time switch auto auto sweep time select normal adjacent channel power on a...

  • Page 474: Nxdn

    Appendix e standard parameter list e-98 nxdn table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting nxdn bw-6.25khz frequency span 30 khz rbw 100 hz detection rms storage mode average sweep time switch auto auto sweep time select normal adjacent channel power on ac...

  • Page 475

    E.1 acp e-99 ap p endix a ppendix e table e.1-1 standard parameters for acp function (cont’d) standard parameter name setting nxdn bw-12.5khz frequency span 70 khz rbw 100 hz detection rms storage mode average sweep time switch auto auto sweep time select normal adjacent channel power on acp referen...

  • Page 476: E.2  Burst Average Power

    Appendix e standard parameter list e-100 e.2 burst average power w-cdma/mobile wimax/lte/dsrc table e.2-1 standard parameters for burst average power standard parameter name setting w-cdma uplink/downlink rbw 20 mhz detection rms swp 10 ms trace point 1001 burst average power on mobile wimax dl / ul...

  • Page 477

    E.2 burst average power e-101 ap p endix a ppendix e td-scdma/lte tdd/cdma2000/ev-do table e.2-1 standard parameters for burst average power (cont’d) standard parameter name setting td-scdma 5ms subframe rbw 20 mhz detection rms swp 5 ms trace point 1001 burst average power on lte tdd uplink/downlin...

  • Page 478: E.3 Channel Power

    Appendix e standard parameter list e-102 e.3 channel power w-cdma table e.3-1 standard parameters for channel power function standard parameter name setting w-cdma uplink/downlink (mean power) frequency span 10 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel cen...

  • Page 479: Mobile Wimax

    E.3 channel power e-103 ap p endix a ppendix e mobile wimax table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting mobile wimax dl / ul 10mhz bw frequency span 20 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel center...

  • Page 480: Lte

    Appendix e standard parameter list e-104 lte table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting lte uplink/downlink mean power 1.4mhz bw frequency span 2.8 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel center ce...

  • Page 481

    E.3 channel power e-105 ap p endix a ppendix e table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting lte uplink/downlink mean power 10mhz bw frequency span 20 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel center ce...

  • Page 482

    Appendix e standard parameter list e-106 table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting lte uplink/downlink filtered power 1.4mhz bw frequency span 2.8 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel center ce...

  • Page 483

    E.3 channel power e-107 ap p endix a ppendix e table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting lte uplink/downlink filtered power 10mhz bw frequency span 20 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel cente...

  • Page 484: Lte Tdd

    Appendix e standard parameter list e-108 lte tdd table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting lte tdd uplink/downlink mean power 1.4mhz bw frequency span 2.8 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel c...

  • Page 485

    E.3 channel power e-109 ap p endix a ppendix e table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting lte tdd uplink/downlink mean power 10mhz bw frequency span 20 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel cente...

  • Page 486

    Appendix e standard parameter list e-110 table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting lte tdd uplink/downlink filtered power 1.4mhz bw frequency span 2.8 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel cente...

  • Page 487

    E.3 channel power e-111 ap p endix a ppendix e table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting lte tdd uplink/downlink filtered power 10mhz bw frequency span 20 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel c...

  • Page 488: Dsrc/td-Scdma

    Appendix e standard parameter list e-112 dsrc/td-scdma table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting dsrc /4dqpsk frequency span 10 mhz rbw auto detection rms sweep time switch manual sweep time freq. Domain 7.1 s auto sweep time select normal t...

  • Page 489: Xg-Phs

    E.3 channel power e-113 ap p endix a ppendix e xg-phs table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting xg-phs mean power 10mhz bw frequency span 20 mhz rbw auto detection rms gate sweep off sweep time switch manual sweep time freq. Domain 5000 ms tr...

  • Page 490: Cdma2000/ev-Do

    Appendix e standard parameter list e-114 cdma2000/ev-do table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting cdma2000 forward link frequency span 2.5 mhz rbw auto detection rms sweep time switch manual sweep time freq. Domain 1.25 s auto sweep time sele...

  • Page 491: Isdb-Tmm/isdb-T

    E.3 channel power e-115 ap p endix a ppendix e isdb-tmm/isdb-t table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting isdb-tmm 14.2mhz bw (mean power) frequency span 20 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel ...

  • Page 492: Isdb-T

    Appendix e standard parameter list e-116 isdb-t sb table e.3-1 standard parameters for channel power function (cont’d) standard parameter name setting isdb-t sb 3.9mhz bw (mean power) frequency span 20 mhz rbw auto detection rms swp auto, normal trace point 1001 channel power on channel center cente...

  • Page 493: E.4 Obw

    E.4 obw e-117 ap p endix a ppendix e e.4 obw w-cdma/mobile wimax table e.4-1 standard parameters for obw function standard parameter name setting w-cdma uplink/downlink method n% of power n% ratio 99.00% frequency span 10 mhz rbw 30 khz detection rms swp auto, normal obw on trace point 1001 mobile w...

  • Page 494: Lte

    Appendix e standard parameter list e-118 lte table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting lte uplink/downlink 1.4mhz bandwidth method n% of power n% ratio 99.00% frequency span 2.8 mhz rbw 10 khz detection rms swp auto, normal obw on trace point 1001 lte ...

  • Page 495

    E.4 obw e-119 ap p endix a ppendix e table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting lte uplink/downlink 10mhz bandwidth method n% of power n% ratio 99.00% frequency span 20 mhz rbw 100 khz detection rms swp auto, normal obw on trace point 1001 lte uplink/do...

  • Page 496: Lte Tdd

    Appendix e standard parameter list e-120 lte tdd table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting lte tdd uplink/downlink 1.4mhz bandwidth method n% of power n% ratio 99.00% frequency span 2.8 mhz rbw 10 khz detection rms swp auto, normal obw on trace point 4...

  • Page 497

    E.4 obw e-121 ap p endix a ppendix e table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting lte tdd uplink/downlink 10mhz bandwidth method n% of power n% ratio 99.00% frequency span 20 mhz rbw 100 khz detection rms swp auto, normal obw on trace point 1001 lte tdd u...

  • Page 498: Dsrc

    Appendix e standard parameter list e-122 dsrc table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting dsrc /4dqpsk method n% of power n% ratio 99.00% frequency span 10 mhz rbw 30 khz vbw 30 khz vbw mode power detection positive sweep time switch manual sweep time f...

  • Page 499

    E.4 obw e-123 ap p endix a ppendix e td-scdma/xg-phs/cdma2000/ev-do table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting td-scdma method n% of power n% ratio 99.00% frequency span 5 mhz rbw 30 khz detection rms sweep time switch manual sweep time freq. Domain 676...

  • Page 500

    Appendix e standard parameter list e-124 table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting xg-phs 20mhz bandwidth method n% of power n% ratio 99.00% frequency span 40 mhz rbw 100 khz vbw 300 khz storage mode max hold storage count 10 detection positive sweep t...

  • Page 501: Isdb-Tmm/isdb-T/isdb-T

    E.4 obw e-125 ap p endix a ppendix e isdb-tmm/isdb-t/isdb-t sb table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting isdb-tmm 14.2mhz bw method n% of power n% ratio 99.00% frequency span 20 mhz rbw 10 khz detection rms swp auto, normal obw on trace point 1001 isdb...

  • Page 502: Telec-T401/telec-T403

    Appendix e standard parameter list e-126 telec-t401/telec-t403 table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting telec-t401 dsss/cck (wlan) method n% of power n% ratio 99.00% frequency span 60 mhz rbw 300 khz vbw 300 khz detection positive swp auto, normal obw...

  • Page 503

    E.4 obw e-127 ap p endix a ppendix e table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting telec-t403 40mhz (wlan) method n% of power n% ratio 99.00% frequency span 80 mhz rbw 300 khz vbw 300 khz detection positive swp auto, normal obw on trace point 1001 telec-t4...

  • Page 504: Telec-T405

    Appendix e standard parameter list e-128 telec-t405 table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting telec-t405 20mhz (wlan) method n% of power n% ratio 99.00% frequency span 60 mhz rbw 30 khz vbw 30 khz detection positive swp auto, normal obw on trace point ...

  • Page 505: Etsi En 301 893

    E.4 obw e-129 ap p endix a ppendix e etsi en 301 893 table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 5mhz (wlan) method xdb down xdb value 6db frequency span 10 mhz rbw 100 khz vbw 100 khz detection positive swp auto, normal obw o...

  • Page 506

    Appendix e standard parameter list e-130 table e.4-1 standard parameters for obw function (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 40mhz (wlan) method xdb down xdb value 6 db frequency span 80 mhz rbw 100 khz vbw 100 khz detection positive swp auto, normal obw on trace po...

  • Page 507: E.5 Sem

    E.5 sem e-131 ap p endix a ppendix e e.5 sem w-cdma table e.5-1 standard parameters for spectrum emission mask standard parameter name setting w-cdma uplink limit side both noise cancel off reference mode channel channel bw 3.84 mhz rbw 30 khz sweep time auto auto sweep time select normal detection ...

  • Page 508

    Appendix e standard parameter list e-132 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma uplink offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-1 auto sweep time select normal offset...

  • Page 509

    E.5 sem e-133 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma uplink offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off off offset-6 on/off off limit-1 abs1 start level –69.6 db...

  • Page 510

    Appendix e standard parameter list e-134 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma uplink (additional) limit side both noise cancel off reference mode channel channel bw 3.84 mhz rbw 30 khz sweep time auto auto sweep time select normal...

  • Page 511

    E.5 sem e-135 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma uplink (additional) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-4 auto sweep...

  • Page 512

    Appendix e standard parameter list e-136 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma uplink (additional) limit-1 abs2 stop level –15 dbm limit-2 abs2 stop level –13 dbm limit-3 abs2 stop level –13 dbm limit-4 abs2 stop level –13 dbm limi...

  • Page 513

    E.5 sem e-137 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p ≥ 43dbm) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep time auto auto sweep time select normal detec...

  • Page 514

    Appendix e standard parameter list e-138 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p ≥ 43dbm) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep time auto offset...

  • Page 515

    E.5 sem e-139 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p ≥ 43dbm) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/off off limit-1 abs1 start l...

  • Page 516

    Appendix e standard parameter list e-140 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p ≥ 43dbm) (additional) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep time auto auto sweep time se...

  • Page 517

    E.5 sem e-141 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p ≥ 43dbm) (additional) offset-1 rbw 30 khz offset-2 rbw 30 khz offset-3 rbw 30 khz offset-4 rbw 100 khz offset-5 rbw 1 mhz offset-1 sweep time au...

  • Page 518

    Appendix e standard parameter list e-142 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p ≥ 43dbm) (additional) offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw 1 mhz offset-5 integrate bw auto offset-1 ...

  • Page 519

    E.5 sem e-143 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (39dbm ≤ p 43dbm) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep time auto auto sweep time select normal...

  • Page 520

    Appendix e standard parameter list e-144 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (39dbm ≤ p 43dbm) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep time auto ...

  • Page 521

    E.5 sem e-145 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (39dbm ≤ p 43dbm) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/off off limit-1 abs1 s...

  • Page 522

    Appendix e standard parameter list e-146 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (39dbm ≤ p 43dbm) (additional) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep time auto auto sweep t...

  • Page 523

    E.5 sem e-147 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (39dbm ≤ p 43dbm) (additional) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep t...

  • Page 524

    Appendix e standard parameter list e-148 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (39dbm ≤ p 43dbm) (additional) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/off o...

  • Page 525

    E.5 sem e-149 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (31dbm ≤ p 39dbm) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep time auto auto sweep time select normal...

  • Page 526

    Appendix e standard parameter list e-150 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (31dbm ≤ p 39dbm) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep time auto ...

  • Page 527

    E.5 sem e-151 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (31dbm ≤ p 39dbm) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/off off limit-1 abs1 s...

  • Page 528

    Appendix e standard parameter list e-152 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (31dbm ≤ p 39dbm) (additional) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep time auto auto sweep t...

  • Page 529

    E.5 sem e-153 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (31dbm ≤ p 39dbm) (additional) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep t...

  • Page 530

    Appendix e standard parameter list e-154 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (31dbm ≤ p 39dbm) (additional) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/off o...

  • Page 531

    E.5 sem e-155 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep time auto auto sweep time select normal detection rms ...

  • Page 532

    Appendix e standard parameter list e-156 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep time auto offset-1 auto s...

  • Page 533

    E.5 sem e-157 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting w-cdma downlink (p offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/off off limit-1 abs1 start level –20....

  • Page 534: Mobile Wimax

    Appendix e standard parameter list e-158 mobile wimax table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting mobile wimax downlink 5mhz bw limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 1 mhz sweep time auto auto sweep time s...

  • Page 535

    E.5 sem e-159 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting mobile wimax uplink 5mhz bw limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 1 mhz vbw auto sweep time auto auto sweep time select norm...

  • Page 536

    Appendix e standard parameter list e-160 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting mobile wimax uplink 5mhz bw limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –13.0 dbm limit-3 abs1 start level –20.0 dbm limit-4 abs1 start level –...

  • Page 537

    E.5 sem e-161 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting mobile wimax downlink 10mhz bw limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 1 mhz sweep time auto auto sweep time select normal de...

  • Page 538

    Appendix e standard parameter list e-162 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting mobile wimax uplink 10mhz bw limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 1 mhz vbw auto sweep time auto auto sweep time selec...

  • Page 539

    E.5 sem e-163 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting mobile wimax uplink 10mhz bw limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –13.0 dbm limit-3 abs1 start level –13.0 dbm limit-4 abs1 start level –25....

  • Page 540: Lte/lte Tdd Downlink

    Appendix e standard parameter list e-164 lte/lte tdd downlink table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 1.4mhz bw) lte tdd downlink (categorya 1.4mhz bw) limit side both noise cancel off reference mode channel channel ...

  • Page 541

    E.5 sem e-165 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 1.4mhz bw) lte tdd downlink (categorya 1.4mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on...

  • Page 542

    Appendix e standard parameter list e-166 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 3mhz bw) lte tdd downlink (categorya 3mhz bw) limit side both noise cancel off reference mode channel channel bw 3 mhz rbw 30 khz sweep...

  • Page 543

    E.5 sem e-167 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 3mhz bw) lte tdd downlink (categorya 3mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/off...

  • Page 544

    Appendix e standard parameter list e-168 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 5mhz bw) lte tdd downlink (categorya 5mhz bw) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep...

  • Page 545

    E.5 sem e-169 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 5mhz bw) lte tdd downlink (categorya 5mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/off...

  • Page 546

    Appendix e standard parameter list e-170 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 10mhz bw) lte tdd downlink (categorya 10mhz bw) limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 30 khz sw...

  • Page 547

    E.5 sem e-171 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 10mhz bw) lte tdd downlink (categorya 10mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/o...

  • Page 548

    Appendix e standard parameter list e-172 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 15mhz bw) lte tdd downlink (categorya 15mhz bw) limit side both noise cancel off reference mode channel channel bw 15 mhz rbw 30 khz sw...

  • Page 549

    E.5 sem e-173 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 15mhz bw) lte tdd downlink (categorya 15mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/o...

  • Page 550

    Appendix e standard parameter list e-174 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 20mhz bw) lte tdd downlink (categorya 20mhz bw) limit side both noise cancel off reference mode channel channel bw 20 mhz rbw 30 khz sw...

  • Page 551

    E.5 sem e-175 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya 20mhz bw) lte tdd downlink (categorya 20mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/o...

  • Page 552

    Appendix e standard parameter list e-176 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 1.4mhz bw) lte tdd downlink (categorya > 1ghz 1.4mhz bw) limit side both noise cancel off reference mode channel channel bw 1.4 ...

  • Page 553

    E.5 sem e-177 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 1.4mhz bw) lte tdd downlink (categorya > 1ghz 1.4mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off o...

  • Page 554

    Appendix e standard parameter list e-178 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 3mhz bw) lte tdd downlink (categorya > 1ghz 3mhz bw) limit side both noise cancel off reference mode channel channel bw 3 mhz rb...

  • Page 555

    E.5 sem e-179 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 3mhz bw) lte tdd downlink (categorya > 1ghz 3mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off o...

  • Page 556

    Appendix e standard parameter list e-180 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 5mhz bw) lte tdd downlink (categorya > 1ghz 5mhz bw) limit side both noise cancel off reference mode channel channel bw 5 mhz rb...

  • Page 557

    E.5 sem e-181 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 5mhz bw) lte tdd downlink (categorya > 1ghz 5mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off o...

  • Page 558

    Appendix e standard parameter list e-182 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 10mhz bw) lte tdd downlink (categorya > 1ghz 10mhz bw) limit side both noise cancel off reference mode channel channel bw 10 mhz...

  • Page 559

    E.5 sem e-183 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 10mhz bw) lte tdd downlink (categorya > 1ghz 10mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off...

  • Page 560

    Appendix e standard parameter list e-184 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 15mhz bw) lte tdd downlink (categorya > 1ghz 15mhz bw) limit side both noise cancel off reference mode channel channel bw 15 mhz...

  • Page 561

    E.5 sem e-185 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 15mhz bw) lte tdd downlink (categorya > 1ghz 15mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off...

  • Page 562

    Appendix e standard parameter list e-186 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 20mhz bw) lte tdd downlink (categorya > 1ghz 20mhz bw) limit side both noise cancel off reference mode channel channel bw 20 mhz...

  • Page 563

    E.5 sem e-187 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categorya > 1ghz 20mhz bw) lte tdd downlink (categorya > 1ghz 20mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off...

  • Page 564

    Appendix e standard parameter list e-188 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 1.4mhz bw) lte tdd downlink (categoryb 1.4mhz bw) limit side both noise cancel off reference mode channel channel bw 1.4 mhz rbw 30 khz...

  • Page 565

    E.5 sem e-189 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 1.4mhz bw) lte tdd downlink (categoryb 1.4mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on...

  • Page 566

    Appendix e standard parameter list e-190 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 3mhz bw) lte tdd downlink (categoryb 3mhz bw) limit side both noise cancel off reference mode channel channel bw 3 mhz rbw 30 khz sweep...

  • Page 567

    E.5 sem e-191 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 3mhz bw) lte tdd downlink (categoryb 3mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/off...

  • Page 568

    Appendix e standard parameter list e-192 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 5mhz bw) lte tdd downlink (categoryb 5mhz bw) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 30 khz sweep...

  • Page 569

    E.5 sem e-193 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 5mhz bw) lte tdd downlink (categoryb 5mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/off...

  • Page 570

    Appendix e standard parameter list e-194 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 10mhz bw) lte tdd downlink (categoryb 10mhz bw) limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 30 khz sw...

  • Page 571

    E.5 sem e-195 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 10mhz bw) lte tdd downlink (categoryb 10mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/o...

  • Page 572

    Appendix e standard parameter list e-196 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 15mhz bw) lte tdd downlink (categoryb 15mhz bw) limit side both noise cancel off reference mode channel channel bw 15 mhz rbw 30 khz sw...

  • Page 573

    E.5 sem e-197 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 15mhz bw) lte tdd downlink (categoryb 15mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/o...

  • Page 574

    Appendix e standard parameter list e-198 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 20mhz bw) lte tdd downlink (categoryb 20mhz bw) limit side both noise cancel off reference mode channel channel bw 20 mhz rbw 30 khz sw...

  • Page 575

    E.5 sem e-199 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb 20mhz bw) lte tdd downlink (categoryb 20mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/o...

  • Page 576

    Appendix e standard parameter list e-200 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 1.4mhz bw) lte tdd downlink (categoryb > 1ghz 1.4mhz bw) limit side both noise cancel off reference mode channel channel bw 1.4 ...

  • Page 577

    E.5 sem e-201 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 1.4mhz bw) lte tdd downlink (categoryb > 1ghz 1.4mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off o...

  • Page 578

    Appendix e standard parameter list e-202 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 3mhz bw) lte tdd downlink (categoryb > 1ghz 3mhz bw) limit side both noise cancel off reference mode channel channel bw 3 mhz rb...

  • Page 579

    E.5 sem e-203 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 3mhz bw) lte tdd downlink (categoryb > 1ghz 3mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off o...

  • Page 580

    Appendix e standard parameter list e-204 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 5mhz bw) lte tdd downlink (categoryb > 1ghz 5mhz bw) limit side both noise cancel off reference mode channel channel bw 5 mhz rb...

  • Page 581

    E.5 sem e-205 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 5mhz bw) lte tdd downlink (categoryb > 1ghz 5mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off o...

  • Page 582

    Appendix e standard parameter list e-206 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 10mhz bw) lte tdd downlink (categoryb > 1ghz 10mhz bw) limit side both noise cancel off reference mode channel channel bw 10 mhz...

  • Page 583

    E.5 sem e-207 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 10mhz bw) lte tdd downlink (categoryb > 1ghz 10mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off...

  • Page 584

    Appendix e standard parameter list e-208 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 15mhz bw) lte tdd downlink (categoryb > 1ghz 15mhz bw) limit side both noise cancel off reference mode channel channel bw 15 mhz...

  • Page 585

    E.5 sem e-209 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 15mhz bw) lte tdd downlink (categoryb > 1ghz 15mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off...

  • Page 586

    Appendix e standard parameter list e-210 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 20mhz bw) lte tdd downlink (categoryb > 1ghz 20mhz bw) limit side both noise cancel off reference mode channel channel bw 20 mhz...

  • Page 587

    E.5 sem e-211 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte downlink (categoryb > 1ghz 20mhz bw) lte tdd downlink (categoryb > 1ghz 20mhz bw) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off...

  • Page 588: Lte/lte Tdd Uplink

    Appendix e standard parameter list e-212 lte/lte tdd uplink table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 1.4mhz) lte tdd uplink (general 1.4mhz) limit side both noise cancel off reference mode channel channel bw 1.4 mhz rbw 3...

  • Page 589

    E.5 sem e-213 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 1.4mhz) lte tdd uplink (general 1.4mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off o...

  • Page 590

    Appendix e standard parameter list e-214 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 3mhz) lte tdd uplink (general 3mhz) limit side both noise cancel off reference mode channel channel bw 3 mhz rbw 30 khz sweep time 1000 ms ...

  • Page 591

    E.5 sem e-215 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 3mhz) lte tdd uplink (general 3mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off o...

  • Page 592

    Appendix e standard parameter list e-216 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 5mhz) lte tdd uplink (general 5mhz) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 100 khz sweep time 500 ms ...

  • Page 593

    E.5 sem e-217 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 5mhz) lte tdd uplink (general 5mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off o...

  • Page 594

    Appendix e standard parameter list e-218 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 10mhz) lte tdd uplink (general 10mhz) limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 300 khz sweep time 400 ...

  • Page 595

    E.5 sem e-219 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 10mhz) lte tdd uplink (general 10mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off...

  • Page 596

    Appendix e standard parameter list e-220 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 15mhz) lte tdd uplink (general 15mhz) limit side both noise cancel off reference mode channel channel bw 15 mhz rbw 300 khz sweep time 500 ...

  • Page 597

    E.5 sem e-221 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 15mhz) lte tdd uplink (general 15mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off...

  • Page 598

    Appendix e standard parameter list e-222 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 20mhz) lte tdd uplink (general 20mhz) limit side both noise cancel off reference mode channel channel bw 20 mhz rbw 300 khz sweep time 1000...

  • Page 599

    E.5 sem e-223 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (general 20mhz) lte tdd uplink (general 20mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off...

  • Page 600

    Appendix e standard parameter list e-224 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 1.4mhz) lte tdd uplink (ns-03 1.4mhz) limit side both noise cancel off reference mode channel channel bw 1.4 mhz rbw 30 khz sweep time 500 ms...

  • Page 601

    E.5 sem e-225 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 1.4mhz) lte tdd uplink (ns-03 1.4mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off o...

  • Page 602

    Appendix e standard parameter list e-226 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 3mhz) lte tdd uplink (ns-03 3mhz) limit side both noise cancel off reference mode channel channel bw 3 mhz rbw 30 khz sweep time 1000 ms auto...

  • Page 603

    E.5 sem e-227 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 3mhz) lte tdd uplink (ns-03 3mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off offse...

  • Page 604

    Appendix e standard parameter list e-228 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 5mhz) lte tdd uplink (ns-03 5mhz) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 100 khz sweep time 500 ms auto...

  • Page 605

    E.5 sem e-229 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 5mhz) lte tdd uplink (ns-03 5mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off offse...

  • Page 606

    Appendix e standard parameter list e-230 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 10mhz) lte tdd uplink (ns-03 10mhz) limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 300 khz sweep time 400 ms a...

  • Page 607

    E.5 sem e-231 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 10mhz) lte tdd uplink (ns-03 10mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off off...

  • Page 608

    Appendix e standard parameter list e-232 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 15mhz) lte tdd uplink (ns-03 15mhz) limit side both noise cancel off reference mode channel channel bw 15 mhz rbw 300 khz sweep time 500 ms a...

  • Page 609

    E.5 sem e-233 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 15mhz) lte tdd uplink (ns-03 15mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off off...

  • Page 610

    Appendix e standard parameter list e-234 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 20mhz) lte tdd uplink (ns-03 20mhz) limit side both noise cancel off reference mode channel channel bw 20 mhz rbw 300 khz sweep time 1000 ms ...

  • Page 611

    E.5 sem e-235 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-03 20mhz) lte tdd uplink (ns-03 20mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off off...

  • Page 612

    Appendix e standard parameter list e-236 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 1.4mhz) lte tdd uplink (ns-04 1.4mhz) limit side both noise cancel off reference mode channel channel bw 1.4 mhz rbw 30 khz sweep time 500 ms...

  • Page 613

    E.5 sem e-237 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 1.4mhz) lte tdd uplink (ns-04 1.4mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off o...

  • Page 614

    Appendix e standard parameter list e-238 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 3mhz) lte tdd uplink (ns-04 3mhz) limit side both noise cancel off reference mode channel channel bw 3 mhz rbw 30 khz sweep time 1000 ms auto...

  • Page 615

    E.5 sem e-239 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 3mhz) lte tdd uplink (ns-04 3mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off offse...

  • Page 616

    Appendix e standard parameter list e-240 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 5mhz) lte tdd uplink (ns-04 5mhz) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 100 khz sweep time 500 ms auto...

  • Page 617

    E.5 sem e-241 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 5mhz) lte tdd uplink (ns-04 5mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off offse...

  • Page 618

    Appendix e standard parameter list e-242 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 10mhz) lte tdd uplink (ns-04 10mhz) limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 300 khz sweep time 400 ms a...

  • Page 619

    E.5 sem e-243 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 10mhz) lte tdd uplink (ns-04 10mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off off...

  • Page 620

    Appendix e standard parameter list e-244 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 15mhz) lte tdd uplink (ns-04 15mhz) limit side both noise cancel off reference mode channel channel bw 15 mhz rbw 300 khz sweep time 500 ms a...

  • Page 621

    E.5 sem e-245 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 15mhz) lte tdd uplink (ns-04 15mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off off...

  • Page 622

    Appendix e standard parameter list e-246 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 20mhz) lte tdd uplink (ns-04 20mhz) limit side both noise cancel off reference mode channel channel bw 20 mhz rbw 300 khz sweep time 1000 ms ...

  • Page 623

    E.5 sem e-247 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-04 20mhz) lte tdd uplink (ns-04 20mhz) (cont’d) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off off off...

  • Page 624

    Appendix e standard parameter list e-248 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-06/07 1.4mhz) lte tdd uplink (ns-06/07 1.4mhz) limit side both noise cancel off reference mode channel channel bw 1.4 mhz rbw 30 khz sweep time ...

  • Page 625

    E.5 sem e-249 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-06/07 1.4mhz) lte tdd uplink (ns-06/07 1.4mhz) (cont’d) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 in...

  • Page 626

    Appendix e standard parameter list e-250 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-06/07 3mhz) lte tdd uplink (ns-06/07 3mhz) limit side both noise cancel off reference mode channel channel bw 3 mhz rbw 30 khz sweep time 1000 m...

  • Page 627

    E.5 sem e-251 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-06/07 3mhz) lte tdd uplink (ns-06/07 3mhz) (cont’d) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integr...

  • Page 628

    Appendix e standard parameter list e-252 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-06/07 5mhz) lte tdd uplink (ns-06/07 5mhz) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 100 khz sweep time 500 m...

  • Page 629

    E.5 sem e-253 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-06/07 5mhz) lte tdd uplink (ns-06/07 5mhz) (cont’d) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integr...

  • Page 630

    Appendix e standard parameter list e-254 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-06/07 10mhz) lte tdd uplink (ns-06/07 10mhz) limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 300 khz sweep time 40...

  • Page 631

    E.5 sem e-255 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (ns-06/07 10mhz) lte tdd uplink (ns-06/07 10mhz) (cont’d) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 inte...

  • Page 632

    Appendix e standard parameter list e-256 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (japan 5mhz) limit side both noise cancel off reference mode channel channel bw 5 mhz rbw 100 khz sweep time 500 ms auto sweep time select normal de...

  • Page 633

    E.5 sem e-257 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (japan 5mhz) (cont’d) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw auto offset-1 on/off on off...

  • Page 634

    Appendix e standard parameter list e-258 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (japan 10mhz) limit side both noise cancel off reference mode channel channel bw 10 mhz rbw 300 khz sweep time 400 ms auto sweep time select normal ...

  • Page 635

    E.5 sem e-259 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (japan 10mhz) (cont’d) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw auto offset-1 on/off on of...

  • Page 636

    Appendix e standard parameter list e-260 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (japan 15mhz) limit side both noise cancel off reference mode channel channel bw 15 mhz rbw 300 khz sweep time 500 ms auto sweep time select normal ...

  • Page 637

    E.5 sem e-261 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (japan 15mhz) (cont’d) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw auto offset-1 on/off on of...

  • Page 638

    Appendix e standard parameter list e-262 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (japan 20mhz) limit side both noise cancel off reference mode channel channel bw 20 mhz rbw 300 khz sweep time 1000 ms auto sweep time select normal...

  • Page 639

    E.5 sem e-263 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting lte uplink (japan 20mhz) (cont’d) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw auto offset-1 on/off on of...

  • Page 640: Td-Scdma

    Appendix e standard parameter list e-264 td-scdma table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma dl trace point tune (34dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manua...

  • Page 641

    E.5 sem e-265 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma dl trace point tune (34dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offse...

  • Page 642

    Appendix e standard parameter list e-266 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma dl trace point tune (26dbm ≤ p 34dbm) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual s...

  • Page 643

    E.5 sem e-267 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma dl trace point tune (26dbm ≤ p 34dbm) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal...

  • Page 644

    Appendix e standard parameter list e-268 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma dl trace point tune (p limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual sweep time freq....

  • Page 645

    E.5 sem e-269 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma dl trace point tune (p offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-4 auto ...

  • Page 646

    Appendix e standard parameter list e-270 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma ul trace point tune (–53.5dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual swee...

  • Page 647

    E.5 sem e-271 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma ul trace point tune (–53.5dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal of...

  • Page 648

    Appendix e standard parameter list e-272 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma ul trace point tune (–55dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual sweep ...

  • Page 649

    E.5 sem e-273 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma ul trace point tune (–55dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offs...

  • Page 650

    Appendix e standard parameter list e-274 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink actual (34dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual sweep time ...

  • Page 651

    E.5 sem e-275 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink actual (34dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-4 ...

  • Page 652

    Appendix e standard parameter list e-276 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink actual (26dbm ≤ p 34dbm) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual sweep...

  • Page 653

    E.5 sem e-277 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink actual (26dbm ≤ p 34dbm) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal off...

  • Page 654

    Appendix e standard parameter list e-278 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink actual (p limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual sweep time freq. Dom...

  • Page 655

    E.5 sem e-279 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink actual (p offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-4 auto swee...

  • Page 656

    Appendix e standard parameter list e-280 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma uplink actual (–53.5dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual sweep time...

  • Page 657

    E.5 sem e-281 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma uplink actual (–53.5dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-1...

  • Page 658

    Appendix e standard parameter list e-282 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma uplink actual (–55dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time switch manual sweep time f...

  • Page 659

    E.5 sem e-283 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma uplink actual (–55dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-1 d...

  • Page 660

    Appendix e standard parameter list e-284 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink fast (34dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time auto auto sweep time select...

  • Page 661

    E.5 sem e-285 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink fast (34dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-4 au...

  • Page 662

    Appendix e standard parameter list e-286 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink fast (26dbm ≤ p 34dbm) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time auto auto sweep time ...

  • Page 663

    E.5 sem e-287 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink fast (26dbm ≤ p 34dbm) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offse...

  • Page 664

    Appendix e standard parameter list e-288 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink fast (p limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time auto auto sweep time select normal d...

  • Page 665

    E.5 sem e-289 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma downlink fast (p offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-4 auto sweep ...

  • Page 666

    Appendix e standard parameter list e-290 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma uplink fast (–53.5dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time auto auto sweep time selec...

  • Page 667

    E.5 sem e-291 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma uplink fast (–53.5dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-1 d...

  • Page 668

    Appendix e standard parameter list e-292 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma uplink fast (–55dbm ≤ p) limit side both noise cancel off reference mode channel channel bw 1.6 mhz rbw 30 khz sweep time auto auto sweep time select ...

  • Page 669

    E.5 sem e-293 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting td-scdma uplink fast (–55dbm ≤ p) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-1 det...

  • Page 670: Xg-Phs

    Appendix e standard parameter list e-294 xg-phs table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting xg-phs 10mhz bw bs frequency span 50 mhz rbw 30 khz reference mode channel reference channel bandwidth 10 mhz reference sweep time switch auto reference...

  • Page 671

    E.5 sem e-295 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting xg-phs 10mhz bw ue frequency span 50 mhz rbw 30 khz reference mode channel reference channel bandwidth 10 mhz reference sweep time switch auto reference auto sweep...

  • Page 672

    Appendix e standard parameter list e-296 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting xg-phs 10mhz bw ue limit-2 fail logic abs1 offset-2 detection positive offset-3 on/off on offset-3 start freq-1 20 mhz offset-3 stop freq-1 25 mhz offset-3 rbw...

  • Page 673: Cdma2000

    E.5 sem e-297 ap p endix a ppendix e cdma2000 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (pout 28dbm) limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto...

  • Page 674

    Appendix e standard parameter list e-298 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (pout 28dbm) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto ...

  • Page 675

    E.5 sem e-299 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (pout 28dbm) limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –13.0 dbm limit-3 abs1 start level –46.0 dbm...

  • Page 676

    Appendix e standard parameter list e-300 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (28dbm ≤ pout limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto swe...

  • Page 677

    E.5 sem e-301 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (28dbm ≤ pout offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time ...

  • Page 678

    Appendix e standard parameter list e-302 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (28dbm ≤ pout limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –27.0 dbm limit-3 abs1 start level –46....

  • Page 679

    E.5 sem e-303 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (pout ≥ 33dbm) limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep ...

  • Page 680

    Appendix e standard parameter list e-304 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (pout ≥ 33dbm) offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep ...

  • Page 681

    E.5 sem e-305 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 0,2,5,7,9,10 (pout ≥ 33dbm) limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –13.0 dbm limit-3 abs1 start level –46.0 d...

  • Page 682

    Appendix e standard parameter list e-306 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (pout 28dbm) limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep...

  • Page 683

    E.5 sem e-307 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (pout 28dbm) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offse...

  • Page 684

    Appendix e standard parameter list e-308 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (pout 28dbm) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off off offse...

  • Page 685

    E.5 sem e-309 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (pout 28dbm) limit-1 rel start level –45.0 db limit-2 rel start level –45.0 db limit-3 rel start level –50.0 db limit-...

  • Page 686

    Appendix e standard parameter list e-310 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (28dbm ≤ pout limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto swee...

  • Page 687

    E.5 sem e-311 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (28dbm ≤ pout offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offs...

  • Page 688

    Appendix e standard parameter list e-312 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (28dbm ≤ pout offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off off offs...

  • Page 689

    E.5 sem e-313 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (28dbm ≤ pout limit-1 rel start level –45.0 db limit-2 rel start level –45.0 db limit-3 rel start level –50.0 db limit...

  • Page 690

    Appendix e standard parameter list e-314 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (pout ≥ 33dbm) limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto swe...

  • Page 691

    E.5 sem e-315 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (pout ≥ 33dbm) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto off...

  • Page 692

    Appendix e standard parameter list e-316 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (pout ≥ 33dbm) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off off off...

  • Page 693

    E.5 sem e-317 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 1,4,8,14,15 (pout ≥ 33dbm) limit-1 rel start level –45.0 db limit-2 rel start level –45.0 db limit-3 rel start level –55.0 db limi...

  • Page 694

    Appendix e standard parameter list e-318 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (pout 28dbm) limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep time auto...

  • Page 695

    E.5 sem e-319 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (pout 28dbm) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep ...

  • Page 696

    Appendix e standard parameter list e-320 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (pout 28dbm) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/off ...

  • Page 697

    E.5 sem e-321 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (pout 28dbm) limit-1 rel start level –45.0 db limit-2 rel start level –45.0 db limit-3 rel start level –55.0 db limit-4 rel star...

  • Page 698

    Appendix e standard parameter list e-322 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (28dbm ≤ pout limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep time aut...

  • Page 699

    E.5 sem e-323 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (28dbm ≤ pout offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep...

  • Page 700

    Appendix e standard parameter list e-324 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (28dbm ≤ pout offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off off offset-5 on/off on offset-6 on/of...

  • Page 701

    E.5 sem e-325 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (28dbm ≤ pout limit-1 rel start level –45.0 db limit-2 rel start level –45.0 db limit-3 rel start level –55.0 db limit-4 rel sta...

  • Page 702

    Appendix e standard parameter list e-326 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (pout ≥ 33dbm) limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep time au...

  • Page 703

    E.5 sem e-327 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (pout ≥ 33dbm) offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 swee...

  • Page 704

    Appendix e standard parameter list e-328 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (pout ≥ 33dbm) offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/of...

  • Page 705

    E.5 sem e-329 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 6 (pout ≥ 33dbm) limit-1 rel start level –45.0 db limit-2 rel start level –45.0 db limit-3 rel start level –55.0 db limit-4 rel st...

  • Page 706

    Appendix e standard parameter list e-330 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 11,12 limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep time auto auto swe...

  • Page 707

    E.5 sem e-331 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 11,12 offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset-...

  • Page 708

    Appendix e standard parameter list e-332 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting cdma2000 forward link band class 11,12 limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –9.0 dbm limit-3 abs1 start level –9.0 dbm limit-4 abs1 star...

  • Page 709: Ev-Do

    E.5 sem e-333 ap p endix a ppendix e ev-do table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 0,2,5,7,9,10 limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep time 20 ms a...

  • Page 710

    Appendix e standard parameter list e-334 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 0,2,5,7,9,10 offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal...

  • Page 711

    E.5 sem e-335 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 0,2,5,7,9,10 limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –13.0 dbm limit-3 abs1 start level –46.0 dbm limit-4 abs1 st...

  • Page 712

    Appendix e standard parameter list e-336 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 1,4,14,15 limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep time 20 ms auto s...

  • Page 713

    E.5 sem e-337 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 1,4,14,15 offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offset...

  • Page 714

    Appendix e standard parameter list e-338 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 1,4,14,15 limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –9.0 dbm limit-3 abs1 start level –13.0 dbm limit-4 abs1 st...

  • Page 715

    E.5 sem e-339 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 6,8,13 limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep time 20 ms auto sweep ti...

  • Page 716

    Appendix e standard parameter list e-340 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 6,8,13 offset-1 auto sweep time select normal offset-2 auto sweep time select normal offset-3 auto sweep time select normal offse...

  • Page 717

    E.5 sem e-341 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 6,8,13 limit-1 abs1 start level –13.0 dbm limit-2 abs1 start level –13.0 dbm limit-3 abs1 start level –13.0 dbm limit-4 abs1 start le...

  • Page 718

    Appendix e standard parameter list e-342 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 11,12 limit side both noise cancel off reference mode channel channel bw 1.23 mhz rbw 30 khz vbw auto sweep time 20 ms auto sweep...

  • Page 719

    E.5 sem e-343 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 11,12 offset-1 sweep time 20 ms offset-2 sweep time 20 ms offset-3 sweep time 20 ms offset-4 sweep time 20 ms offset-5 sweep time aut...

  • Page 720

    Appendix e standard parameter list e-344 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 11,12 offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off off offset-6 on/off off limit-1...

  • Page 721

    E.5 sem e-345 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting ev-do forward link band class 11,12 limit-1 rel start level –45.0 db limit-2 rel start level –60.0 db limit-3 rel start level –65.0 db limit-4 rel start level –75....

  • Page 722: Isdb-Tmm

    Appendix e standard parameter list e-346 isdb-tmm table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-tmm 14.2mhz bw limit side both noise cancel off reference mode channel channel bw 14.2 mhz rbw 10 khz vbw 300 hz sweep time auto auto sweep time ...

  • Page 723

    E.5 sem e-347 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-tmm 14.2mhz bw offset-1 sweeptime auto offset-2 sweeptime auto offset-3 sweeptime auto offset-4 sweeptime auto offset-1 auto sweep time select fast offset-2 a...

  • Page 724

    Appendix e standard parameter list e-348 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-tmm 14.2mhz bw (abs) limit side lower * 2 noise cancel off reference mode channel channel bw 14.2 mhz rbw 10 khz vbw 300 hz sweep time auto auto sweep tim...

  • Page 725

    E.5 sem e-349 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-tmm 14.2mhz bw (abs) offset-1 sweeptime auto offset-2 sweeptime auto offset-3 sweeptime auto offset-4 sweeptime auto offset-5 sweeptime auto offset-1 auto swe...

  • Page 726

    Appendix e standard parameter list e-350 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-tmm 14.2mhz bw (abs) limit-1 fail logic off * 2 limit-2 fail logic off * 2 limit-3 fail logic off * 2 limit-4 fail logic off * 2 limit-5 fail logic abs1 a...

  • Page 727

    E.5 sem e-351 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-tmm (isdb-t) 5.6mhz bw limit side both noise cancel off reference mode channel channel bw 5.6 mhz rbw 10 khz vbw 300 hz sweep time auto auto sweep time select...

  • Page 728

    Appendix e standard parameter list e-352 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-tmm (isdb-t) 5.6mhz bw offset-1 sweeptime auto offset-2 sweeptime auto offset-3 sweeptime auto offset-4 sweeptime auto offset-1 auto sweep time select fas...

  • Page 729: Isdb-T

    E.5 sem e-353 ap p endix a ppendix e isdb-t table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-t 5.6mhz bw limit side both noise cancel off reference mode channel channel bw 5.6 mhz rbw 10 khz vbw 300 hz sweep time auto auto sweep time select fas...

  • Page 730

    Appendix e standard parameter list e-354 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-t 5.6mhz bw offset-1 sweeptime auto offset-2 sweeptime auto offset-3 sweeptime auto offset-4 sweeptime auto offset-1 auto sweep time select fast offset-2 ...

  • Page 731: Isdb-T

    E.5 sem e-355 ap p endix a ppendix e isdb-t sb table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-t sb 3.9mhz bw limit side both noise cancel off reference mode channel channel bw 3.9 mhz rbw 10 khz vbw 300 hz sweep time auto auto sweep time sele...

  • Page 732

    Appendix e standard parameter list e-356 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting isdb-t sb 3.9mhz bw offset-1 sweeptime auto offset-2 sweeptime auto offset-3 sweeptime auto offset-4 sweeptime auto offset-1 auto sweep time select fast offset...

  • Page 733

    E.5 sem e-357 ap p endix a ppendix e *4: value when antenna power exceeds 5 w. The value for each antenna power can be calculated using the following formula (source: arib std-b46 2.0). Antenna power p in watts. Antenna power [w] setting [db] p > 5 –75.9 5 ≥ p > 0.5 – (10log(6000/14×9/10)+43+10log (...

  • Page 734: Sem 802.11A

    Appendix e standard parameter list e-358 sem 802.11a table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11a bw_20mhz (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 18 mhz rbw 100 khz vbw 30 khz sweep ...

  • Page 735

    E.5 sem e-359 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11a bw_20mhz (wlan) (ieee 802.11-2012) offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fast offse...

  • Page 736: Sem 802.11B

    Appendix e standard parameter list e-360 sem 802.11b table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11b dsss/cck (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 22 mhz rbw 100 khz vbw 30 khz sweep ...

  • Page 737

    E.5 sem e-361 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11b dsss/cck (wlan) (ieee 802.11-2012) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/off off offset-6 on/off of...

  • Page 738: Sem 802.11G

    Appendix e standard parameter list e-362 sem 802.11g table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11g ofdm (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 18 mhz rbw 100 khz vbw 30 khz sweep time...

  • Page 739

    E.5 sem e-363 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11g ofdm (wlan) (ieee 802.11-2012) offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fast offset-4 ...

  • Page 740

    Appendix e standard parameter list e-364 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11g dsss/cck (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 22 mhz rbw 100 khz vbw 30 khz sweep time auto au...

  • Page 741

    E.5 sem e-365 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11g dsss/cck (wlan) (ieee 802.11-2012) offset-1 on/off on offset-2 on/off on offset-3 on/off off offset-4 on/off off offset-5 on/off off offset-6 on/off of...

  • Page 742

    Appendix e standard parameter list e-366 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11g dsss-ofdm (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 18 mhz rbw 100 khz vbw 30 khz sweep time auto a...

  • Page 743

    E.5 sem e-367 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11g dsss-ofdm (wlan) (ieee 802.11-2012) offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fast offs...

  • Page 744: Sem 802.11J

    Appendix e standard parameter list e-368 sem 802.11j table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11j bw_10mhz (wlan) (ieee 802.11-2007) limit side both noise cancel off reference mode peak channel bw 9 mhz rbw 100 khz vbw 30 khz sweep t...

  • Page 745

    E.5 sem e-369 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11j bw_10mhz (wlan) (ieee 802.11-2007) offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fast offse...

  • Page 746: Sem 802.11P

    Appendix e standard parameter list e-370 sem 802.11p table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11p bw_10mhz (wlan) (ieee 802.11-2007) limit side both noise cancel off reference mode peak channel bw 9 mhz rbw 100 khz vbw 30 khz sweep t...

  • Page 747

    E.5 sem e-371 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11p bw_10mhz (wlan) (ieee 802.11-2007) offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fast offse...

  • Page 748: Sem 802.11N

    Appendix e standard parameter list e-372 sem 802.11n table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11n bw_20mhz (2.4ghz) (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 18 mhz rbw 100 khz sweep ti...

  • Page 749

    E.5 sem e-373 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11n bw_20mhz (2.4ghz) (wlan) (ieee 802.11-2012) offset-1 detection rms offset-2 detection rms offset-3 detection rms offset-4 detection rms offset-1 trace ...

  • Page 750

    Appendix e standard parameter list e-374 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11n bw_20mhz (5ghz) (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 18 mhz rbw 100 khz sweep time auto auto s...

  • Page 751

    E.5 sem e-375 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11n bw_20mhz (5ghz) (wlan) (ieee 802.11-2012) offset-1 detection rms offset-2 detection rms offset-3 detection rms offset-4 detection rms offset-1 trace po...

  • Page 752

    Appendix e standard parameter list e-376 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11n bw_40mhz (2.4ghz) (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 38 mhz rbw 100 khz sweep time auto auto...

  • Page 753

    E.5 sem e-377 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11n bw_40mhz (2.4ghz) (wlan) (ieee 802.11-2012) offset-1 detection rms offset-2 detection rms offset-3 detection rms offset-4 detection rms offset-1 trace ...

  • Page 754

    Appendix e standard parameter list e-378 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11n bw_40mhz (5ghz) (wlan) (ieee 802.11-2012) limit side both noise cancel off reference mode peak channel bw 38 mhz rbw 100 khz sweep time auto auto s...

  • Page 755

    E.5 sem e-379 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11n bw_40mhz (5ghz) (wlan) (ieee 802.11-2012) offset-1 detection rms offset-2 detection rms offset-3 detection rms offset-4 detection rms offset-1 trace po...

  • Page 756: Sem 802.11Ac

    Appendix e standard parameter list e-380 sem 802.11ac table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11ac bw_20mhz (wlan) (ieee 802.11ac-2013) limit side both noise cancel off reference mode peak channel bw 18 mhz rbw 100 khz sweep time au...

  • Page 757

    E.5 sem e-381 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11ac bw_20mhz (wlan) (ieee 802.11ac-2013) offset-1 detection rms offset-2 detection rms offset-3 detection rms offset-4 detection rms offset-1 trace point ...

  • Page 758

    Appendix e standard parameter list e-382 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11ac bw_40mhz (wlan) (ieee 802.11ac-2013) limit side both noise cancel off reference mode peak channel bw 38 mhz rbw 100 khz sweep time auto auto sweep...

  • Page 759

    E.5 sem e-383 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11ac bw_40mhz (wlan) (ieee 802.11ac-2013) offset-1 detection rms offset-2 detection rms offset-3 detection rms offset-4 detection rms offset-1 trace point ...

  • Page 760

    Appendix e standard parameter list e-384 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11ac bw_80mhz (wlan) (ieee 802.11ac-2013) limit side both noise cancel off reference mode peak channel bw 78 mhz rbw 100 khz sweep time auto auto sweep...

  • Page 761

    E.5 sem e-385 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11ac bw_80mhz (wlan) (ieee 802.11ac-2013) offset-1 detection rms offset-2 detection rms offset-3 detection rms offset-4 detection rms offset-1 trace point ...

  • Page 762

    Appendix e standard parameter list e-386 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11ac bw_160mhz (wlan) (ieee 802.11ac-2013) limit side both noise cancel off reference mode peak channel bw 158 mhz rbw 100 khz sweep time auto auto swe...

  • Page 763

    E.5 sem e-387 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting sem 802.11ac bw_160mhz (wlan) (ieee 802.11ac-2013) offset-1 detection rms offset-2 detection rms offset-3 detection rms offset-4 detection rms offset-1 trace point...

  • Page 764: Etsi En 301 893

    Appendix e standard parameter list e-388 etsi en 301 893 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 5mhz (wlan) limit side both noise cancel off reference mode peak channel bw 5 mhz rbw 1 mhz vbw 30 khz sweep time a...

  • Page 765

    E.5 sem e-389 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 5mhz (wlan) offset-1 vbw 30 khz offset-2 vbw 30 khz offset-3 vbw 30 khz offset-4 vbw 30 khz offset-5 vbw 30 khz offset-6 vbw 30 khz off...

  • Page 766

    Appendix e standard parameter list e-390 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 5mhz (wlan) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw auto offset-5 in...

  • Page 767

    E.5 sem e-391 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 10mhz (wlan) limit side both noise cancel off reference mode peak channel bw 10 mhz rbw 1 mhz vbw 30 khz sweep time auto auto sweep tim...

  • Page 768

    Appendix e standard parameter list e-392 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 10mhz (wlan) offset-1 vbw 30 khz offset-2 vbw 30 khz offset-3 vbw 30 khz offset-4 vbw 30 khz offset-5 vbw 30 khz offset-6 vbw 30 kh...

  • Page 769

    E.5 sem e-393 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 10mhz (wlan) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw auto offset-5 integ...

  • Page 770

    Appendix e standard parameter list e-394 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 20mhz (wlan) limit side both noise cancel off reference mode peak channel bw 20 mhz rbw 1 mhz vbw 30 khz sweep time auto auto sweep...

  • Page 771

    E.5 sem e-395 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 20mhz (wlan) offset-1 vbw 30 khz offset-2 vbw 30 khz offset-3 vbw 30 khz offset-4 vbw 30 khz offset-5 vbw 30 khz offset-6 vbw 30 khz of...

  • Page 772

    Appendix e standard parameter list e-396 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 20mhz (wlan) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw auto offset-5 i...

  • Page 773

    E.5 sem e-397 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 40mhz (wlan) limit side both noise cancel off reference mode peak channel bw 20 mhz rbw 1 mhz vbw 30 khz sweep time auto auto sweep tim...

  • Page 774

    Appendix e standard parameter list e-398 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 40mhz (wlan) offset-1 vbw 30 khz offset-2 vbw 30 khz offset-3 vbw 30 khz offset-4 vbw 30 khz offset-5 vbw 30 khz offset-6 vbw 30 kh...

  • Page 775

    E.5 sem e-399 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 ofdm 40mhz (wlan) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-4 integrate bw auto offset-5 integ...

  • Page 776: O-Qpsk

    Appendix e standard parameter list e-400 o-qpsk table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting o-qpsk 2450mhz (lr-wpans) limit side both noise cancel off reference mode peak channel bw 2 mhz rbw 100 khz sweep time auto auto sweep time select norma...

  • Page 777: Bpsk

    E.5 sem e-401 ap p endix a ppendix e bpsk table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting bpsk 950mhz (lr-wpans) limit side both noise cancel off reference mode peak channel bw 2 mhz rbw 100 khz sweep time auto auto sweep time select normal detecti...

  • Page 778: Gfsk

    Appendix e standard parameter list e-402 gfsk table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting gfsk 50ksps 950mhz (lr-wpans) limit side both noise cancel off reference mode peak channel bw 2 mhz rbw 100 khz sweep time auto auto sweep time select nor...

  • Page 779

    E.5 sem e-403 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting gfsk 100ksps 950mhz (lr-wpans) limit side both noise cancel off reference mode peak channel bw 2 mhz rbw 100 khz sweep time auto auto sweep time select normal dete...

  • Page 780

    Appendix e standard parameter list e-404 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting gfsk 200ksps 950mhz (lr-wpans) limit side both noise cancel off reference mode peak channel bw 2 mhz rbw 100 khz sweep time auto auto sweep time select normal ...

  • Page 781

    E.5 sem e-405 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting gfsk 50ksps 920mhz (lr-wpans) limit side both noise cancel off reference mode peak channel bw 2 mhz rbw 100 khz sweep time auto auto sweep time select normal detec...

  • Page 782

    Appendix e standard parameter list e-406 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting gfsk 100ksps 920mhz (lr-wpans) limit side both noise cancel off reference mode peak channel bw 2 mhz rbw 100 khz sweep time auto auto sweep time select normal ...

  • Page 783

    E.5 sem e-407 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting gfsk 200ksps 920mhz (lr-wpans) limit side both noise cancel off reference mode peak channel bw 2 mhz rbw 100 khz sweep time auto auto sweep time select normal dete...

  • Page 784: Apco P25

    Appendix e standard parameter list e-408 apco p25 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting apco p25 fcc 12.5khz limit side both noise cancel off reference mode peak channel bw 11.25 khz rbw 30 khz sweep time 5.7 s auto sweep time select norm...

  • Page 785

    E.5 sem e-409 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting apco p25 fcc 12.5khz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-...

  • Page 786

    Appendix e standard parameter list e-410 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting apco p25 ntia 12.5khz limit side both noise cancel off reference mode peak channel bw 11.25 khz rbw 30 khz sweep time 5.7 s auto sweep time select normal detec...

  • Page 787

    E.5 sem e-411 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting apco p25 ntia 12.5khz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-1 on/off on offset-2 on/off on offset-3 on/off on offset...

  • Page 788: Microlink Etsi Cs: 7Mhz

    Appendix e standard parameter list e-412 microlink etsi cs: 7mhz table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:2 frequency span 35 mhz limit side both reference mode peak channel bw 1 khz rbw 30 khz vbw 300 hz sweep t...

  • Page 789

    E.5 sem e-413 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:2 offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep time auto offset-...

  • Page 790

    Appendix e standard parameter list e-414 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:2 limit-1 rel stop level 1.0 db limit-2 rel stop level –23.0 db limit-3 rel stop level –23.0 db limit-4 rel stop level –45.0 db li...

  • Page 791

    E.5 sem e-415 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:4l freq band:3g - 17ghz frequency span 35 mhz limit side both reference mode peak channel bw 1 khz rbw 30 khz vbw 300 hz sweep time au...

  • Page 792

    Appendix e standard parameter list e-416 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:4l freq band:3g - 17ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select ...

  • Page 793

    E.5 sem e-417 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink ets cs:7mhz class:4l freq band:17g - 30ghz frequency span 35 mhz limit side both reference mode peak channel bw 1 khz rbw 30 khz vbw 300 hz sweep time au...

  • Page 794

    Appendix e standard parameter list e-418 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:4l freq band:17g - 30ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select...

  • Page 795

    E.5 sem e-419 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:4l freq band:above 30ghz frequency span 35 mhz limit side both reference mode peak channel bw 1 khz rbw 30 khz vbw 300 hz sweep time a...

  • Page 796

    Appendix e standard parameter list e-420 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:4l freq band:above 30ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select...

  • Page 797

    E.5 sem e-421 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink ets cs:7mhz class:5b freq band:3g - 17ghz frequency span 35 mhz limit side both reference mode peak channel bw 1 khz rbw 30 khz vbw 300 hz sweep time aut...

  • Page 798

    Appendix e standard parameter list e-422 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:5b freq band:3g - 17ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offset...

  • Page 799

    E.5 sem e-423 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:5b freq band:3g - 17ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 offset...

  • Page 800

    Appendix e standard parameter list e-424 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:5b freq band:17g - 30ghz frequency span 35 mhz limit side both reference mode peak channel bw 1 khz rbw 30 khz vbw 300 hz sweep ti...

  • Page 801

    E.5 sem e-425 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:5b freq band:17g - 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offset-6 ...

  • Page 802

    Appendix e standard parameter list e-426 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:5b freq band:17g - 30ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 o...

  • Page 803

    E.5 sem e-427 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:5b freq band:above 30ghz frequency span 35 mhz limit side both reference mode peak channel bw 1 khz rbw 30 khz vbw 300 hz sweep time a...

  • Page 804

    Appendix e standard parameter list e-428 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:5b freq band:above 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offse...

  • Page 805

    E.5 sem e-429 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:7mhz class:5b freq band:above 30ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/of...

  • Page 806: Microlink Etsi Cs: 14Mhz

    Appendix e standard parameter list e-430 microlink etsi cs: 14mhz table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:2 frequency span 70 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz swee...

  • Page 807

    E.5 sem e-431 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:2 offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep time auto offset...

  • Page 808

    Appendix e standard parameter list e-432 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:2 limit-1 fail logic rel limit-2 fail logic rel limit-3 fail logic rel limit-4 fail logic rel limit-5 fail logic rel.

  • Page 809

    E.5 sem e-433 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:4l freq band:3g - 17ghz frequency span 70 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep time ...

  • Page 810

    Appendix e standard parameter list e-434 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:4l freq band:3g - 17ghz offset-1 detection positive offset-2 detection positive offset-3 detection positive offset-4 detection po...

  • Page 811

    E.5 sem e-435 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:4l freq band:17g - 30ghz frequency span 70 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep time...

  • Page 812

    Appendix e standard parameter list e-436 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:4l freq band:17g - 30ghz offset-1 detection positive offset-2 detection positive offset-3 detection positive offset-4 detection p...

  • Page 813

    E.5 sem e-437 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:4l freq band:above 30ghz frequency span 70 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep time...

  • Page 814

    Appendix e standard parameter list e-438 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:4l freq band:above 30ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time selec...

  • Page 815

    E.5 sem e-439 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:3g - 17ghz frequency span 70 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep time ...

  • Page 816

    Appendix e standard parameter list e-440 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:3g - 17ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offse...

  • Page 817

    E.5 sem e-441 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:3g - 17ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 offse...

  • Page 818

    Appendix e standard parameter list e-442 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:17g - 30ghz frequency span 70 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep ...

  • Page 819

    E.5 sem e-443 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:17g - 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offset-6...

  • Page 820

    Appendix e standard parameter list e-444 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:17g - 30ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 ...

  • Page 821

    E.5 sem e-445 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:above 30ghz frequency span 70 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep time...

  • Page 822

    Appendix e standard parameter list e-446 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:above 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offs...

  • Page 823

    E.5 sem e-447 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:14mhz class:5b freq band:above 30ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/o...

  • Page 824: Microlink Etsi Cs: 28Mhz

    Appendix e standard parameter list e-448 microlink etsi cs: 28mhz table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:2 frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz swe...

  • Page 825

    E.5 sem e-449 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:2 offset-1 sweep time auto offset-2 sweep time auto offset-3 sweep time auto offset-4 sweep time auto offset-5 sweep time auto offset...

  • Page 826

    Appendix e standard parameter list e-450 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:2 offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on limit-1 rel start level 2.0 db l...

  • Page 827

    E.5 sem e-451 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4l freq band:3g - 17ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep time...

  • Page 828

    Appendix e standard parameter list e-452 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4l freq band:3g - 17ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select...

  • Page 829

    E.5 sem e-453 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4l freq band:17g - 30ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep tim...

  • Page 830

    Appendix e standard parameter list e-454 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4l freq band:17g - 30ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time selec...

  • Page 831

    E.5 sem e-455 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4l freq band:above 30ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep tim...

  • Page 832

    Appendix e standard parameter list e-456 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4l freq band:above 30ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time selec...

  • Page 833

    E.5 sem e-457 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:3g - 17ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep time...

  • Page 834

    Appendix e standard parameter list e-458 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:3g - 17ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offse...

  • Page 835

    E.5 sem e-459 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:3g - 17ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/of...

  • Page 836

    Appendix e standard parameter list e-460 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:17g - 30ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep...

  • Page 837

    E.5 sem e-461 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:17g - 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offset-6...

  • Page 838

    Appendix e standard parameter list e-462 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:17g - 30ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 ...

  • Page 839

    E.5 sem e-463 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:above 30ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep tim...

  • Page 840

    Appendix e standard parameter list e-464 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:above 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offs...

  • Page 841

    E.5 sem e-465 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:4h freq band:above 30ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 on/o...

  • Page 842

    Appendix e standard parameter list e-466 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5a - 6a freq band:3g - 17ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz s...

  • Page 843

    E.5 sem e-467 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5a - 6a freq band:3g - 17ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offs...

  • Page 844

    Appendix e standard parameter list e-468 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5a - 6a freq band:3g - 17ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1...

  • Page 845

    E.5 sem e-469 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs: 28mhz class:5a - 6a freq band:17g - 30ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz swe...

  • Page 846

    Appendix e standard parameter list e-470 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs: 28mhz class:5a - 6a freq band:17g - 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 h...

  • Page 847

    E.5 sem e-471 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs: 28mhz class:5a - 6a freq band:17g - 30ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 100...

  • Page 848

    Appendix e standard parameter list e-472 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5a - 6a freq band:above 30ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz ...

  • Page 849

    E.5 sem e-473 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5a - 6a freq band:above 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz off...

  • Page 850

    Appendix e standard parameter list e-474 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5a - 6a freq band:above 30ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offs...

  • Page 851

    E.5 sem e-475 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b - 6b freq band:3g - 17ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep...

  • Page 852

    Appendix e standard parameter list e-476 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b - 6b freq band:3g - 17ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz ...

  • Page 853

    E.5 sem e-477 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b - 6b freq band:3g - 17ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 ...

  • Page 854

    Appendix e standard parameter list e-478 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b6b freq band: 17g - 30ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sw...

  • Page 855

    E.5 sem e-479 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b6b freq band: 17g - 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offse...

  • Page 856

    Appendix e standard parameter list e-480 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b6b freq band: 17g - 30ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 10...

  • Page 857

    E.5 sem e-481 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b6b freq band: above 30ghz frequency span 140 mhz limit side both reference mode peak channel bw 1 khz rbw 100 khz vbw 300 hz sweep ...

  • Page 858

    Appendix e standard parameter list e-482 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b6b freq band: above 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz o...

  • Page 859

    E.5 sem e-483 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:28mhz class:5b6b freq band: above 30ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6 o...

  • Page 860: Microlink Etsi Cs: 56Mhz

    Appendix e standard parameter list e-484 microlink etsi cs: 56mhz table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:4l freq band:3g - 17ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw ...

  • Page 861

    E.5 sem e-485 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:4l freq band:3g - 17ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fas...

  • Page 862

    Appendix e standard parameter list e-486 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:4l freq band:17g - 30ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw 300 khz vbw 300 hz sweep...

  • Page 863

    E.5 sem e-487 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:4l freq band:17g - 30ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fa...

  • Page 864

    Appendix e standard parameter list e-488 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:4l freq band:above 30ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw 300 khz vbw 300 hz sweep...

  • Page 865

    E.5 sem e-489 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:4l freq band:above 30ghz offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fa...

  • Page 866

    Appendix e standard parameter list e-490 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a6a freq band:3g - 17ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw 300 khz vbw 300 hz swee...

  • Page 867

    E.5 sem e-491 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a6a freq band:3g - 17ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz offset-...

  • Page 868

    Appendix e standard parameter list e-492 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a6a freq band:3g - 17ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001...

  • Page 869

    E.5 sem e-493 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a - 6a freq band:17g - 30ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw 300 khz vbw 300 hz swee...

  • Page 870

    Appendix e standard parameter list e-494 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a - 6a freq band:17g - 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz...

  • Page 871

    E.5 sem e-495 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a - 6a freq band:17g - 30ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001...

  • Page 872

    Appendix e standard parameter list e-496 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a - 6a freq band:above 30ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw 300 khz vbw 300 hz ...

  • Page 873

    E.5 sem e-497 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a - 6a freq band:above 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz off...

  • Page 874

    Appendix e standard parameter list e-498 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5a - 6a freq band:above 30ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offs...

  • Page 875

    E.5 sem e-499 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:3g - 17ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw 300 khz vbw 300 hz sweep...

  • Page 876

    Appendix e standard parameter list e-500 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:3g - 17ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz ...

  • Page 877

    E.5 sem e-501 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:3g - 17ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 ...

  • Page 878

    Appendix e standard parameter list e-502 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:17g - 30ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw 300 khz vbw 300 hz ...

  • Page 879

    E.5 sem e-503 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:17g - 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz off...

  • Page 880

    Appendix e standard parameter list e-504 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:17g - 30ghz offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point ...

  • Page 881

    E.5 sem e-505 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:above 30ghz frequency span 280 mhz limit side both reference mode peak channel bw 1 khz rbw 300 khz vbw 300 hz swee...

  • Page 882

    Appendix e standard parameter list e-506 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:above 30ghz offset-1 vbw 300 hz offset-2 vbw 300 hz offset-3 vbw 300 hz offset-4 vbw 300 hz offset-5 vbw 300 hz...

  • Page 883

    E.5 sem e-507 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting microlink etsi cs:56mhz class:5b - 6b freq band:above 30ghz offset-1 on/off on offset-2 on/off on offset-3 on/off on offset-4 on/off on offset-5 on/off on offset-6...

  • Page 884: Telec-T403

    Appendix e standard parameter list e-508 telec-t403 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 ≤18mhz 5180mhz-5240 mhz lower (wlan) limit side lower reference mode channel channel bw 20 mhz rbw 1 mhz sweep time auto auto sweep time ...

  • Page 885

    E.5 sem e-509 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 ≤18mhz 5180mhz-5240 mhz upper (wlan) limit side upper reference mode channel channel bw 20 mhz rbw 1 mhz sweep time auto auto sweep time select fast det...

  • Page 886

    Appendix e standard parameter list e-510 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 ≤18mhz 5180mhz-5240 mhz upper (wlan) offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 offset-...

  • Page 887

    E.5 sem e-511 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 ≤18mhz 5260mhz-5320 mhz lower (wlan) limit side lower reference mode channel channel bw 20 mhz rbw 1 mhz sweep time auto auto sweep time select fast det...

  • Page 888

    Appendix e standard parameter list e-512 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 ≤18mhz 5260mhz-5320 mhz lower (wlan) offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 offset-...

  • Page 889

    E.5 sem e-513 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 ≤18mhz 5260mhz-5320 mhz upper (wlan) limit side upper reference mode channel channel bw 20 mhz rbw 1 mhz sweep time auto auto sweep time select fast det...

  • Page 890

    Appendix e standard parameter list e-514 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 18mhz ≤19mhz 5180mhz-5240 mhz lower (wlan) limit side lower reference mode channel channel bw 20 mhz rbw 1 mhz sweep time auto auto sweep time selec...

  • Page 891

    E.5 sem e-515 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 18mhz ≤19mhz 5180mhz-5240 mhz upper (wlan) limit side upper reference mode channel channel bw 20 mhz rbw 1 mhz sweep time auto auto sweep time select fa...

  • Page 892

    Appendix e standard parameter list e-516 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 18mhz ≤19mhz 5180mhz-5240 mhz upper (wlan) offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 o...

  • Page 893

    E.5 sem e-517 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 18mhz ≤19mhz 5260mhz-5320 mhz lower (wlan) limit side lower reference mode channel channel bw 20 mhz rbw 1 mhz sweep time auto auto sweep time select fa...

  • Page 894

    Appendix e standard parameter list e-518 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 18mhz ≤19mhz 5260mhz-5320 mhz lower (wlan) offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 o...

  • Page 895

    E.5 sem e-519 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 18mhz ≤19mhz 5260mhz-5320 mhz upper (wlan) limit side upper reference mode channel channel bw 20 mhz rbw 1 mhz sweep time auto auto sweep time select fa...

  • Page 896

    Appendix e standard parameter list e-520 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5190mhz-5230 mhz lower (wlan) limit side lower reference mode channel channel bw 40 mhz rbw 1 mhz sweep time auto auto sweep time select fast detect...

  • Page 897

    E.5 sem e-521 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5190mhz-5230 mhz upper (wlan) limit side upper reference mode channel channel bw 40 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection ...

  • Page 898

    Appendix e standard parameter list e-522 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5190mhz-5230 mhz upper (wlan) offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 offset-1 integ...

  • Page 899

    E.5 sem e-523 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5270mhz-5310 mhz lower (wlan) limit side lower reference mode channel channel bw 40 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection ...

  • Page 900

    Appendix e standard parameter list e-524 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5270mhz-5310 mhz lower (wlan) offset-1 auto sweep time select fast offset-2 auto sweep time select fast offset-3 auto sweep time select fast offset-...

  • Page 901

    E.5 sem e-525 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5270mhz-5310 mhz lower (wlan) limit-1 abs1 start level –3.01 db limit-2 abs1 start level –13.01 db limit-3 abs1 start level –21.02 db limit-4 abs1 start...

  • Page 902

    Appendix e standard parameter list e-526 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5270mhz-5310 mhz upper (wlan) limit side upper reference mode channel channel bw 40 mhz rbw 1 mhz sweep time auto auto sweep time select fast detect...

  • Page 903

    E.5 sem e-527 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5210mhz lower (wlan) limit side lower reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection positive ...

  • Page 904

    Appendix e standard parameter list e-528 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5210mhz upper (wlan) limit side upper reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection posit...

  • Page 905

    E.5 sem e-529 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5210mhz upper (wlan) offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 offset-1 integrate bw auto ...

  • Page 906

    Appendix e standard parameter list e-530 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5290mhz lower (wlan) limit side lower reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection posit...

  • Page 907

    E.5 sem e-531 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5290mhz lower (wlan) offset-1 trace point 1001 offset-2 trace point 1001 offset-3 trace point 1001 offset-4 trace point 1001 offset-1 integrate bw auto ...

  • Page 908

    Appendix e standard parameter list e-532 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5290mhz upper (wlan) limit side upper reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection posit...

  • Page 909

    E.5 sem e-533 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5250mhz lower (wlan) limit side lower reference mode channel channel bw 160 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection positive...

  • Page 910

    Appendix e standard parameter list e-534 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5250mhz upper (wlan) limit side upper reference mode channel channel bw 160 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection posi...

  • Page 911

    E.5 sem e-535 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5210mhz 80+80 lower (wlan) limit side lower reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection pos...

  • Page 912

    Appendix e standard parameter list e-536 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5210mhz 80+80 upper (wlan) limit side upper reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection...

  • Page 913

    E.5 sem e-537 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5210mhz 80+80 upper (wlan) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-1 on/off on offset-2 on/off on offset...

  • Page 914

    Appendix e standard parameter list e-538 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5210mhz-5530 mhz lower (wlan) limit side lower reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detect...

  • Page 915

    E.5 sem e-539 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5210mhz-5610 mhz upper (wlan) limit side upper reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection ...

  • Page 916

    Appendix e standard parameter list e-540 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5290mhz 80+80 lower (wlan) limit side lower reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection...

  • Page 917

    E.5 sem e-541 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5290mhz 80+80 lower (wlan) offset-1 integrate bw auto offset-2 integrate bw auto offset-3 integrate bw auto offset-1 on/off on offset-2 on/off on offset...

  • Page 918

    Appendix e standard parameter list e-542 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5290mhz 80+80 upper (wlan) limit side upper reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection...

  • Page 919

    E.5 sem e-543 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5290mhz-5530 mhz lower (wlan) limit side lower reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detection ...

  • Page 920

    Appendix e standard parameter list e-544 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting telec-t403 5290mhz-5610 mhz upper (wlan) limit side upper reference mode channel channel bw 80 mhz rbw 1 mhz sweep time auto auto sweep time select fast detect...

  • Page 921: Nxdn

    E.5 sem e-545 ap p endix a ppendix e nxdn table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting nxdn 47cfr-e_6.25 khz limit side both reference mode peak channel bw 6 khz rbw 30 khz vbw 30 khz vbw mode power sweep time manual sweep time value 3 sec auto ...

  • Page 922

    Appendix e standard parameter list e-546 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting nxdn 47cfr-e_6.25 khz offset-1 sweep time switch manual offset-1 sweep time value 2.9 sec offset-2 sweep time switch manual offset-2 sweep time value 3.5 sec o...

  • Page 923

    E.5 sem e-547 ap p endix a ppendix e table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting nxdn 47cfr-d_12.5 khz limit side both reference mode peak channel bw 11.25 khz rbw 30 khz vbw 30 khz vbw mode power sweep time manual sweep time value 5.7 sec auto...

  • Page 924

    Appendix e standard parameter list e-548 table e.5-1 standard parameters for spectrum emission mask (cont’d) standard parameter name setting nxdn 47cfr-d_12.5 khz offset-1 sweep time switch manual offset-1 sweep time value 2.9 sec offset-2 sweep time switch manual offset-2 sweep time value 3.5 sec o...

  • Page 925: E.6 Spurious Emission

    E.6 spurious emission e-549 ap p endix a ppendix e e.6 spurious emission telec-t401 table e.6-1 standard parameters for spurious emission standard parameter name setting telec-t40 1 (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spuri...

  • Page 926

    Appendix e standard parameter list e-550 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t401 (wlan) segment-4 start freq 2.4965 ghz segment-4 stop freq 12.5 ghz or max frequency segment-4 rbw 1 mhz segment-4 vbw 1 mhz segment-4 sweep time switch ...

  • Page 927

    E.6 spurious emission e-551 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t401 (wlan) segment-8 start freq 2.4965 ghz segment-8 stop freq 2.5095 ghz segment-8 rbw 1 mhz segment-8 vbw 1 mhz segment-8 sweep time switch auto ...

  • Page 928: Telec-T402

    Appendix e standard parameter list e-552 telec-t402 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t402 (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 on s...

  • Page 929

    E.6 spurious emission e-553 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t402 (wlan) segment-4 rbw 1 mhz segment-4 vbw 1 mhz segment-4 sweep time switch auto segment-4 detection positive segment-4 limit start level –26 db...

  • Page 930: Telec-T403

    Appendix e standard parameter list e-554 telec-t403 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 ≤ 18mhz 5.2ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segme...

  • Page 931

    E.6 spurious emission e-555 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 ≤ 18mhz 5.3ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segmen...

  • Page 932

    Appendix e standard parameter list e-556 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 ≤ 18mhz 5.6ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 ...

  • Page 933

    E.6 spurious emission e-557 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 18mhz ≤ 19mhz 5.2ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious ...

  • Page 934

    Appendix e standard parameter list e-558 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 18mhz ≤ 19mhz 5.3ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment sw...

  • Page 935

    E.6 spurious emission e-559 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 18mhz ≤ 19mhz 5.6ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious ...

  • Page 936

    Appendix e standard parameter list e-560 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 19mhz 5.2ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 of...

  • Page 937

    E.6 spurious emission e-561 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 19mhz 5.3ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment ...

  • Page 938

    Appendix e standard parameter list e-562 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 19mhz 5.6ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 of...

  • Page 939

    E.6 spurious emission e-563 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 38mhz ≤ 78mhz 5.2ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious ...

  • Page 940

    Appendix e standard parameter list e-564 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 38mhz ≤ 78mhz 5.3ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment sw...

  • Page 941

    E.6 spurious emission e-565 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 38mhz ≤ 78mhz 5.6ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious ...

  • Page 942

    Appendix e standard parameter list e-566 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 78mhz 5.2ghz 5.3ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment swi...

  • Page 943

    E.6 spurious emission e-567 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 78mhz 5.6ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment ...

  • Page 944

    Appendix e standard parameter list e-568 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 5500mhz-5700 mhz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch...

  • Page 945

    E.6 spurious emission e-569 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 5510mhz-5670 mhz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segm...

  • Page 946

    Appendix e standard parameter list e-570 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 5530mhz-5610 mhz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch...

  • Page 947

    E.6 spurious emission e-571 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t403 5570mhz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switc...

  • Page 948: Telec-T405

    Appendix e standard parameter list e-572 telec-t405 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 5mhz 4.9ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment ...

  • Page 949

    E.6 spurious emission e-573 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 5mhz 4.9ghz (wlan) segment-4 limit start level –37 db segment-4 limit stop level –37 db segment-5 start freq 5.342 ghz segment-5 stop freq 26 g...

  • Page 950

    Appendix e standard parameter list e-574 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 5mhz 5.0ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 on ...

  • Page 951

    E.6 spurious emission e-575 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 5mhz 5.0ghz (wlan) segment-4 limit start level –37 db segment-4 limit stop level –37 db segment-5 start freq 5.342 ghz segment-5 stop freq 26 g...

  • Page 952

    Appendix e standard parameter list e-576 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 10mhz 4.9ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 on...

  • Page 953

    E.6 spurious emission e-577 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 10mhz 4.9ghz (wlan) segment-4 limit start level –37 db segment-4 limit stop level –37 db segment-5 start freq 5.342 ghz segment-5 stop freq 26 ...

  • Page 954

    Appendix e standard parameter list e-578 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 10mhz 5.0ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 on...

  • Page 955

    E.6 spurious emission e-579 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 10mhz 5.0ghz (wlan) segment-4 limit start level –37 db segment-4 limit stop level –37 db segment-5 start freq 5.342 ghz segment-5 stop freq 26 ...

  • Page 956

    Appendix e standard parameter list e-580 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 20mhz 4.9ghz ofdm (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switc...

  • Page 957

    E.6 spurious emission e-581 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 20mhz 4.9ghz ofdm (wlan) segment-4 limit start level –37 db segment-4 limit stop level –37 db segment-5 start freq 5.342 ghz segment-5 stop fre...

  • Page 958

    Appendix e standard parameter list e-582 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 20mhz 4.9ghz dsss/cck (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment s...

  • Page 959

    E.6 spurious emission e-583 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 20mhz 4.9ghz dsss/cck (wlan) segment-4 limit start level –37 db segment-4 limit stop level –37 db segment-5 start freq 5.342 ghz segment-5 stop...

  • Page 960

    Appendix e standard parameter list e-584 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 20mhz 5.0ghz ofdm (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switc...

  • Page 961

    E.6 spurious emission e-585 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 20mhz 5.0ghz ofdm (wlan) segment-4 limit start level –37 db segment-4 limit stop level –37 db segment-5 start freq 5.342 ghz segment-5 stop fre...

  • Page 962

    Appendix e standard parameter list e-586 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 20mhz 5.0ghz dsss/cck (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment s...

  • Page 963

    E.6 spurious emission e-587 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 20mhz 5.0ghz dsss/cck (wlan) segment-4 limit start level –37 db segment-4 limit stop level –37 db segment-5 start freq 5.342 ghz segment-5 stop...

  • Page 964

    Appendix e standard parameter list e-588 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting telec-t405 40mhz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 on spurio...

  • Page 965: Fcc 15 407

    E.6 spurious emission e-589 ap p endix a ppendix e fcc 15 407 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting fcc 15 407 5.15ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious se...

  • Page 966

    Appendix e standard parameter list e-590 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting fcc 15.407 5.25ghz tx (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 off ...

  • Page 967

    E.6 spurious emission e-591 ap p endix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting fcc 15.407 5.25ghz devices (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segme...

  • Page 968

    Appendix e standard parameter list e-592 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting fcc 15.407 5.47ghz (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious segment switch3 off spu...

  • Page 969: Etsi En 301 893

    E.6 spurious emission e-593 ap p endix a ppendix e etsi en 301 893 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on sp...

  • Page 970

    Appendix e standard parameter list e-594 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 (wlan) segment-3 start freq 74 mhz segment-3 stop freq 87.5 mhz segment-3 rbw 100 khz segment-3 vbw 100 khz segment-3 sweep time switch auto ...

  • Page 971

    E.6 spurious emission e-595 ap p e ndix a ppendix e table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 (wlan) segment-7 start freq 2300 mhz segment-7 stop freq 4700 mhz segment-7 rbw 100 khz segment-7 vbw 100 khz segment-7 sweep time...

  • Page 972

    Appendix e standard parameter list e-596 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting etsi en 301 893 v1.5.1 (wlan) segment-11 start freq 5.35 ghz segment-11 stop freq 5.47 ghz segment-11 rbw 1 mhz segment-11 vbw 1 mhz segment-11 sweep time switch au...

  • Page 973: Etsi 300 328

    E.6 spurious emission e-597 ap p endix a ppendix e etsi 300 328 table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting etsi 300 328 v1.7.1 (wlan) spurious result type worst spurious fail stop off spurious segment switch1 on spurious segment switch2 on spurious...

  • Page 974

    Appendix e standard parameter list e-598. Table e.6-1 standard parameters for spurious emission (cont’d) standard parameter name setting etsi 300 328 v1.7.1 (wlan) segment-3 start freq 1.8 ghz segment-3 stop freq 1.9 ghz segment-3 rbw 100 khz segment-3 vbw 30 khz segment-3 sweep time switch auto seg...

  • Page 975: Symbol And Numbers

    Index index-1 index references are to page numbers. Symbol and numbers a abs1 start level ........................................... 6-24 abs1 stop level ............................................ 6-24 abs2 start level ........................................... 6-24 abs2 stop level ................

  • Page 976

    Index index-2 e edit ................................................................. 3-13 edit offset number ..................... 6-21, 6-22, 6-23 edit segment number ................ 6-32, 6-33, 6-34 envelope ......................................................... 3-13 envelope point ............

  • Page 977

    Index index-3 index log scale line ............................................... 2-33 log scale unit ........................ 2-23, 2-35, 8-6, 9-3 low phase noise .................................. 2-18, 2-21 lower.............................................................. 6-25 m manual mode .....

  • Page 978

    Index index-4 r rbw ....... 2-39, 2-40, 2-44, 5-15, 5-16, 6-20, 6-21, ........................................................... 6-32, 6-34 rbw mode ..................................................... 2-39 rbw value ...... 2-39, 2-40, 2-44, 5-16, 6-20, 6-21, .........................................

  • Page 979

    Index index-5 index .................................................................. E-100 standard parameters for channel power function..................................................... E-102 standard parameters for obw function .... E-117 standard parameters for spectrum emission mask .........

  • Page 980

    Index index-6..