Baby Lock ellegante BLG guid Instruction And Reference Manual - Before Embroidering
BEFORE EMBROIDERING
128
BEFORE EMBROIDERING
Embroidery Step by Step
Follow the steps below to prepare the machine for embroidery.
Step #
Aim
Action
Page
1
Presser foot attachment
Attach embroidery foot “W”.
129
2
Checking the needle*
Use needle 75/11 for embroidery. *
38
3
Embroidery unit attachment
Attach the embroidery unit.
130
4
Bobbin thread setup**
For the bobbin thread, wind embroidery bobbin thread and set it in place.
21
5
Fabric preparation
Attach a stabilizer material to the fabric, and hoop it in the embroidery frame.
140
6
Pattern selection
Turn the main power to ON, and select an embroidery pattern.
132
7
Embroidery frame attachment
Attach the embroidery frame to the embroidery unit.
145
8
Checking the layout
Check and adjust the size and position of the embroidery.
146
9
Embroidery thread setup
Set up embroidery thread according to the pattern.
27
* It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.).
** Use the alternate bobbin case for any embroidery bobbin thread other than the recommended embroidery bobbin thread (item BBT-W,
page 6).
Step 3
Step 1, 2
Step 7
Step 5
Step 4
Step 6, 8
Step 9