Baby Lock ellegante BLG guid Instruction And Reference Manual - Changing The Needle

CHANGING THE NEEDLE

36

CHANGING THE NEEDLE

!

Press the “Needle Position” button to raise 

the needle.

"

Press .

! The key appears as 

.

#

Use the screwdriver to turn the screw 

toward the front of the machine and loosen 

the screw, then remove the needle.

 CAUTION

• Always press 

 on the screen before changing the needle. If 

 is not pressed and the Start/

Stop button or another operation button is pressed accidentally, the machine will start and injury may 

result.

• Use only sewing machine needles made for home use-type 130/705H needle. Other needles may bend or 

break and may cause injury.

• Never sew with a bent needle. A bent needle will easily break and may cause injury. 

Memo

To check the needle correctly, place the flat 

side of the needle on a flat surface. Check the 

needle from the top and the sides. Throw 

away any bent needles.

a Parallel space

b Level surface (bobbin cover, glass, etc.)

b

a

Note

• Do not apply pressure to the needle clamp 

screw. Doing so may damage the needle or 

machine.