Baby Lock ellegante BLG guid Instruction And Reference Manual - Pulling Up The Bobbin Thread

LOWER THREADING

Ge

tt

ing

 Re

ad

y

25

1

%

Set the bobbin in the bobbin case so that 

the thread unwinds to the left.

&

Hold the bobbin lightly with your right 

hand, and then guide the thread with your 

left hand.

'

Pass the thread through the guide, and then 

pull the thread out towards the front.

a Cutter

! The cutter cuts the thread.

(

Insert the tab in the lower-left corner of the 

bobbin cover, and then lightly press down 

on the right side to close the cover.

Pulling Up the Bobbin Thread

There may be some sewing applications where 

you want to pull up the bobbin thread; for 

example, when making gathers, darts, or doing 

free motion quilting or embroidery.

!

Guide the bobbin thread through the 

groove, following the arrow in the 

illustration.

*

Do not cut the thread with the cutter.

*

Do not replace the bobbin cover.

"

While holding the upper thread, press the 

needle position button to lower the needle.

a Needle position button

 CAUTION

• Be sure to hold down the bobbin with your 

finger and unwind the bobbin thread correctly. 

Otherwise, the thread may break or the thread 

tension will be incorrect.

a

Memo

You can pull up the bobbin thread after thread-

ing the upper thread (see “UPPER THREAD-

ING” on page 27).

a