Baby Lock ellegante BLG guid Instruction And Reference Manual - page 94
Other manuals for ellegante BLG guid:
Additional Accessories Manual
of
241
SEWING THE STITCHES
U
tility
S
titc
h
es
83
3
One-step buttonholes are sewn from the front of the presser foot to the back, as shown below.
a Reinforcement stitching
!
Select a buttonhole stitch, and attach
buttonhole foot “A”.
"
Mark the position and length of the
buttonhole on the fabric.
#
Pull out the button holder plate on the
presser foot, and insert the button that will
be put through the buttonhole. Then tighten
the button holder plate around the button.
a Button holder plate
a
a
a
a
Memo
The maximum buttonhole length is about
28 mm (approx. 1-1/16 inches) (diameter +
thickness of the button).
Memo
The size of the buttonhole is decided by the
button holder plate holding the button.
a