Baby Lock ellegante BLG guid Instruction And Reference Manual - Setting The Bobbin
LOWER THREADING
24
$
Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.
%
Holding the thread with your hands, slide
the thread into the grooves on the thread
guide plate.
a Thread guide plate
&
Pass the thread through the thread guide.
a Thread guide
'
Pass the thread under the pin. Then pass the
thread around the pretension disk making
sure that the thread is under the pretension
disk.
a Thread guide
b Pin
c Pretension disk
(
Follow steps
'
through
*
on page 22
through 23.
Setting the Bobbin
Press
!
!
!
in that order to display a video example of
the operation on the LCD (see page 20). Follow
the steps explained below to complete the
operation.
!
Press the “Presser Foot Lifter” button to
raise the presser foot.
"
Slide the bobbin cover latch to the right.
a Bobbin cover
b Latch
! The bobbin cover opens.
#
Remove the bobbin cover.
$
Hold the bobbin with your right hand and
hold the end of the thread with your left
hand.
a
a
a
b
c
CAUTION
• Use a bobbin thread that has been correctly
wound. Otherwise, the needle may break or
the thread tension will be incorrect.
a
b