Baby Lock ellegante BLG guid Instruction And Reference Manual - Automatically Resuming

ADJUSTMENTS DURING THE EMBROIDERY PROCESS

154

Automatically Resuming 

Embroidery When the Power 

Goes Off

The current color, stitch number and design 

position are saved when the power is interrupted 

during embroidering. The next time that the 

machine is turned on, you can resume 

embroidering.

!

Turn the main power to ON.

"

Follow the instructions shown on the screen 

and remove the embroidery frame.

! The following message will appear.

#

Press .

! The previous sewing screen displayed before the 

machine was turned off appears.

$

Press the “Start/Stop” button to continue 

embroidering.

a Stitch number when embroidery is resumed

Memo

Even if the power goes out in the middle of 

embroidery, the machine returns to the point 

where embroidery was stopped when the 

machine is turned on again.

Note

• Do not remove the embroidery unit or the 

memory will no longer remember your 

design.

Memo

If you want to start a new operation, press 

 so the pattern selection screen 

appears.

a