Baby Lock ellegante BLG guid Instruction And Reference Manual - page 39

UPPER THREADING

28

%

Holding the thread with your hands, slide 

the thread into the grooves on the thread 

guide plate.

a Thread guide plate

&

While holding the thread in your right 

hand, pass the thread through the thread 

guide in the direction indicated.

'

When finished pulling the thread through 

the thread guide, cut the thread and leave 

the thread in position.

a Cutter

(

Press the “Automatic Threading” button to 

have the machine automatically thread the 

needle.

! The upper threading is finished.

Memo

When sewing with fine, cross-wound thread, 

use the small spool cap, and leave a small 

space between the cap and the thread spool.

a Spool cap (small)

b Thread spool (cross-wound thread)

c Space

a

c

b

a

a

Memo

When the “Automatic Threading” button is 

pressed, the presser foot will be automatically 

lowered.

Note

In case the needle is not completely thread, 

slowly pull the loop of the thread through from 

the back of the needle.

a About 50mm (approx. 2 inches)

Memo

If the needle could not be threaded or the 

thread was not passed through the needle bar 

thread guides, perform the procedure again 

starting from step 

#

.

a