Bang & Olufsen BeoVision 7 Manual - page 52

First-time setup of your television 

1

*TV tuner 

Connections 

If you select ‘CABLE BOX’, follow the on-screen information to specify which 

cable box you have connected to the TV. If you select ‘ANTENNA’ or ‘CABLE’, 

a scanning process begins when you store the setting. 

Select the type of equipment connected to each socket, the sockets used, the 

product name, and the source name. 

Information 

This first-time setup procedure is activated when the TV is connected to the mains 

and switched on for the first time. If you want to change your setup at a later date, 

you can access the same menus and update your settings. 

2

*NOTE! When you have made the preferred 

settings in a menu, you may have to press the 

green button to continue to the next menu in the 

first-time setup procedure. Follow on-screen 

instructions. 

Switch on the TV 

Make settings 

You are led through the following settings only 

when you switch on the TV for the first time.*

2

It takes the TV approx. 20 seconds to start up and 

become ready for use. 

Switch on 

Select setting 

Accept and go to next menu item 

Calibrate the speakers 

Set up the speakers to optimise sound from 

your listening position. 

First-time setup of loudspeakers applies only to speakers for TV 

viewing. After first-time setup, you can set up speakers for Home 

cinema viewing. See also ‘Loudspeaker setup’ on pp. 52–53 and 

‘Surround sound and Home cinema’ on p. 22. 

Adjust volume, bass, treble and loudness and preset two default 

speaker combinations. Select a different speaker combination at any 

time. See p. 22. 

Disable or enable internal TV tuner or ATSC, see p. 35*

1

Register connected equipment, see p. 43 

TUNER SETUP 

CONNECTIONS 

SPEAKER TYPES 

TV SPEAKER ROLES 

TV SPEAKER DISTANCE 

SPEAKER LEVEL 

SOUND ADJUSTMENT 

TV 

50