Bang & Olufsen BeoVision 7 Manual - page 11
See two sources at the same time
Your remote control gives you access
to a dual-screen function for viewing
two video sources at the same time.
For example, you can view a video
tape playback and a TV programme
at the same time, provided that the
selected sources are available in your
system.
While watching a programme or
recording, you can divide the screen
between the current programme or
recording (picture A in the second
illustration) and a new programme or
recording (picture B). You can also
swap the two pictures at any time.
Volume adjustment always affects picture A,
while other operations, such as selecting channels,
affect picture B. Choosing a new source cancels
dual-screen viewing.
You can view two HDMI (High Definition
Multimedia Interface) sources at the same time,
but only if one of the sources is connected to
either the HDMI A or HDMI B socket, and the
other source is connected to either the HDMI C or
HDMI D socket. For further information about the
HDMI sockets, refer to the chapter ‘Connection
panels’ on page 20 in the Reference book.
While watching, for example, TV …
> Press
P-and-P to bring up the P-and-P display
on Beo5. (Beo4: Press
LIST repeatedly to display
P-AND-P).
> Press, for example,
DVD to select the source to
view on the right side of the screen (B).
> Press
Swap to swap the left picture and right
picture. (Beo4: Press
0).
To leave the dual-screen function …
> Press
Exit to leave the function and return to
normal viewing of the source on the left side of
the screen (A)
Pressing Text while the function is active brings up
teletext on the right hand side of the screen for
the source shown in picture B. If there is no
teletext service available for this source, the screen
turns black.
To bring up V.TUNER on the right hand side of the
screen, you must press P-and-P, then TV. (Beo4:
Press LIST repeatedly to display P-AND-P, then
press TV). To bring up hard disc recordings on the
right hand side of the screen, you must press P-
and-P, then VMEM. (Beo4: Press LIST repeatedly
to display P-AND-P, then press VMEM).
A
B
A
B
11
NOTE! If you have a Beo4, press LIST repeatedly
until P-V.AUX is shown in the Beo4 display, to
view a source registered in the CONNECTIONS
menu as V.AUX, such as a set-top box.