Bulldog Security DELUXE 500 Installation Manual - Programming
. .
25
PROGRAMMING
Exit: Turn ignition switch to the on position, or leave
it for 15 seconds. 3 long chirps and 3 parking light
flashes will confirm programming exit.
ALARM FEATURE #3 PROGRAMMING CHART
One Chirp with
Press
One LED Pulse
Transmitter Factory Default
Two Chirps with
Three Chirps with
Four Chirps with
Button
Setting
Two LED Pulses
Three LED Pulses
Four LED Pulses
1
2
H7/8 Lt. Green/ H7/8 Lt. Green/
H7/8 Lt. Green/
Black Wire=
Black Wire=
Black Wire= Start
Factory Security
Dual Pulse Door
Status Output
Disarm SignalUnlock (Shock Sensor
Output
Bypass)
3
H5/8 White/
H5/8 White/
H5/8 White/Black
Wire=1 Pulse
Wire= 2 Pulses
Wire= 3 Pulses
Activate
Activate
Activate
4
5 +
H7/6 Violet/
H7/6 Violet/
H7/6 Violet/
H7/6 Violet/
Black Wire
Black Wire
Black Wire
Black Wire
Channel 4 Output= Channel 4 Output= Channel 4 Output= Channel 4 Output=
Momentary
Latched Output
Latched output &
Timer programm-
Output
reset with ignition ing (set to any
on
interval between
1 sec. and 2 min.)
6 +
H7/5 Black/Red H7/5 Black/Red H7/5 Black/Red H7/5 Black/Red
Wire Channel 5
Wire Channel 5
Wire Channel 5
Wire Channel 5
Output =
Output=
Output=
Output=
Momentary Output Latched Output
Latched output and Timer programm-
reset with ignition ing (set to any
on
interval between
1 sec. and 2 min.)
7 +
H7/2 Black/
H7/2 Black/
H7/2 Black/
H7/2 Black/
Violet Wire
Violet Wire
Violet Wire
Violet Wire
Channel 6 Output= Channel 6 Output= Channel 6 Output= Channel 6 Output=
Momentary Output Latched Output
Latched Output and Timer programm-
reset with ignition ing (set to any
on
interval between
1 sec. and 2 min.)