Bulldog Security DELUXE 500 Installation Manual - Table of Contents
. .
TABLE OF CONTENTS
4
2 Steps Door Unlock Wire Connection
Type A Positive Switched Door Lock System .............................16
H7: 10-PIN WHITE WIRE HARNESS.............................................17
H7/1 Blue /Black wire (-) 200mA Ignition 3 Control Output............17
H7/2 Black / Violet wire (-)
200mA Channel 6 Programmable Output....................................17
H7/3 Brown / Black wire (-) 200mA Programmable Output ............17
Horn Output (Factory Default Setting)
Factory Security Rearm Signal Output
H7/4 Black / White wire (-) 200mA
Dome Light Supervision Output ................................................18
H7/5 Black / Red wire (-) 200mA
Channel 5 Programmable Output .............................................18
H7/6 Violet / Black wire (-) 200mA Programmable Output .............18
Channel 4 Programmable Output (Factory Default Setting)
Ground Output During Start (Crank)
H7/7 Red / White wire (-) 200mAChannel 3 (Trunk) Output ...........19
H7/8 LT. Green / Black wire (-) 200mA Programmable Output........19
Dual Pulse Door Unlock Output
Factory Security Disarm Signal Output (Factory default setting)
Start Status (Shock Sensor By-Pass Control) Output..................19
H7/9 Orange / White wire (-)
200mA Grounded Output When Disarmed ..................................20
H7/10 Orange wire (-) 200mA Grounded Output When Armed .......20
H8. 2 PIN BLUE CONNECTOR FOR THE VALET SWITCH ................20
H9. 2 PIN WHITE CONNECTOR
FOR THE LED STATUS INDICATOR...............................................20
PROGRAMMING & TESTING:
A. AUTOMATIC / MANUAL TRANSMISSION VEHICLE ...................21
B. PROGRAMMING A NEW TRANSMITTER....................................21
C. FEATURES PROGRAMMING .................................................21-22
Alarm Feature #1 Programming...............................................22-23
3 / 30 seconds Delay Door Ajar Error Chirp
Alarm Feature #2 Programming...............................................23-24
Comfort Feature
Alarm Feature #3 Programming...............................................24-26
Channel 4 (5 / 6) Timer Control Output Programming
Ground Output During Start (Crank) Programming