Cabletron Systems SmartSwitch 9000 Supplementary Manual - page 11
9
9H423-28 Module Specific Information
MULTICASTS
Displays the number of multicasts received.
LINK STATUS
Indicates whether there is a physical connection from this port to another device.
One of the following values appears:
•
Link - There is a link signal present; there is a valid physical connection from
this port to another device.
•
No Link - There is no link signal present; there is no valid physical connection
from this port to another device.
PORT TYPE
Displays one of the following values:
•
AUI
•
BNC
•
EPIM-x
•
FE-xx
•
MMF SMA
•
MMF SC
•
RJ45
•
RJ71
•
SMF ST
PORT STATUS
Indicates the administrative status of the selected port. Possible values are:
•
ENABLED - The port is turned on administratively
•
DISABLED - The port is turned off administratively
APPLICATION
Displays
BRIDGING
, indicating that the port is operating as a bridge with a
high-speed backbone connection.
OPERATION MODE
Displays the value
FULL DUPLEX
. The port can transmit and receive data at the
same time.
Enable or disable ports from the Bridge Configuration screen.
NOTE