CAME ZM3E Installation Manual - page 7
RX
TX
CAME
RX
TX
./ # .#
DFW
DIR
DELTA-S
DELTA
p.
77
-
M
an
u
al c
od
e:
F
A
0
0
3
8
5
-E
N
FA
0
0
3
8
5
-E
N
v.
11
02
/2
0
1
6
© C
A
M
E c
an
ce
lli auto
m
ati
ci S
.p.
A
. -
Th
e c
onte
nts of th
is m
an
u
al m
ay b
e c
h
an
g
ed at a
ny ti
m
e w
ith
ou
t p
rio
r n
oti
ce
.
Gate-open warning output (contact rated
for: 24 V AC - 3 W max).
To warn that the gate is open.
It switches off when the gate is closed.
Signaling devices
Movement flashing light (contact rating: 230 V -
25 W max). Flashes when the gate is opening and
closing.
Photocells
Configure contact CX, CY or CZ (NC), input for EN 12978
safety devices like photocells.
See [CX input], [CY input] or [CZ input] functions.
- C1 reopening during closing closing. When the gate leaves
are closing, opening the contact causes their movement to
invert, until they are fully opened;
- C2 closing during opening. When the gate leaves are
opening, opening the contact causes their movement to
invert, until they are fully closed;
- C3 partial stop. Stops the gate leaves, if they are moving,
and turns on automatic closing (if the automatic closing
function is on);
- C4 obstruction wait. Stops the gate leaves, and resumes
their movement once the obstruction is removed.
If unused, contacts CX, CY and CZ should be disabled
during programming.
Safety devices
Sensitive Safety Edges
Configure contact CX, CY or CZ (NC), input for EN
12978 safety devices such as sensitive safety-edges.
See the [CX input], [CY input] or [CZ input]
functions.
- C7 reopening during closing. When the gate
leaves are closing, opening the contact causes their
movement to invert, until they are fully opened;
- C8 reclosing during opening. When the gate
leaves are opening, opening the contact inverts their
movement until they are fully closed.
If unused, contacts CX, CY and CZ should be
disabled during programming.
DFW with control
board of the DFI
connections
Cycle or courtesy light (contact rating: 230 V - 60 W max).
Auxiliary connection of an outdoor light which can be positioned
where you like, to increase lighting in the driveway/parking area.
Cycle: it stays lit from the moment that the gate leaf starts opening
until it is completely closed (including the automatic closing time).
Courtesy: it stays on for a fixed time of five minutes.
See [Light E] in [FUNCTIONS].
www.metalines.com
sales@metalines.com