Campbell CCFC Instruction Manual - page 100
Other manuals for CCFC:
Instruction Manual
Manual is about: field camera
of
106
CCFC Field Camera
90
Figure 20-2 CCFC Mounting Holes
When using the optional Mounting Kit, align the outer holes of the CCFC with
the center hole and the 180° slot of the mount. Loosely secure the two together
with the two ¼-20 x 0.5” Hex bolts included with the kit. It is now possible to
mount the CCFC to either a crossarm or other mounting surface with the
included u-bolt.
With the hardware loose, the camera and the mount can be pivoted to allow a
full range of motion when aiming the camera. The hardware should be secured
once the camera is properly aimed at the intended target.
Figure 20-3 CCFC Mounted to Crossarm
Crossarm
U-Bolt
¼-20 x 0.5”
Hex bolts