Campbell CCFC Instruction Manual - 19. Remote Photo Retrieval
CCFC Field Camera
86
18.3 CR1000 COM Port (Control Port) Communications
On the CR1000, a pair of control ports can be configured to function as RS-232
communication (COM) ports. Any of these 4 COM ports can be configured as
PakBus ports and used to communicate with the camera.
The COM ports can be activated as PakBus ports using the Device
Configuration Utility or by using the SerialOpen instruction in the CR1000
program.
The following SerialOpen instruction configures COM Port 2.
x BAUD rate - 115200
x PakBus Port – 4
x Transmit delay – 0
x Buffer size – 1000
x SerialOpen(Com2,115200,4,0,1000)
19. Remote Photo Retrieval
Once the camera has transferred a photo or video to a datalogger, existing
LoggerNet communications can be used to remotely retrieve the photos and
video from the datalogger memory.
There are also permanent links available in the CCFC web interface to
download the most recently captured photos or video files that have been saved
to the camera memory (see Section 7.3.1 Link to Most Recent Photo and
Video).
19.1 LoggerNet File Retrieval
LoggerNet (version 4.0 or newer) includes the File Retrieval setup that
facilitates the photo and video file retrieval from PakBus dataloggers (CR800
series, CR1000, and CR3000, CR300, CR6). The File Retrieval tab is located
in the Setup Screen as part of the datalogger configuration. Once configured,
File Retrieval is used to retrieve photos and video from a datalogger.