Campbell CCFC Instruction Manual - page 21

CCFC Field Camera 

11 

x  Timed Capture 2: 

o 

http://1.2.3.4/stc2.jpg

o 

http://1.2.3.4/stc2.avi

x  External Trigger: 

o 

http://1.2.3.4/etc.jpg

o 

http://1.2.3.4/etc.avi

x  Motion Detect: 

o 

http://1.2.3.4/mdc.jpg

o 

http://1.2.3.4/mdc.avi

7.3.2  FTP Photo Collection from Camera Memory 

If the camera is setup to store photos to the camera memory, it may be 

necessary to collect all the photos from the camera memory. The web interface 

provides a user-friendly method of viewing and saving select files from the 

camera memory through the File Explorer (Section 12.7). However, if it is 

desired to collect a large number of files from an entire folder, using the web 

interface is cumbersome.  

It is recommended to access the CCFC memory using the FTP file transfer 

process. On most Windows machines this is easily done by typing in the IP 

address assigned to the camera by the network. For example,  ftp://1.2.3.4:21 

into a supported web browser, where ‘1.2.3.4’ is the IP address of the camera 

and ‘.21’ is the port used for FTP access. The camera supports FTP access to 

the camera memory on port 21 of the camera. This requires a network 

connection. 

Selecting a directory such as TimedCapture1 will begin the navigation into that 

directory. Whole directories or files can be saved just like any other Windows 

folder.  

Files cannot be deleted this way. 

Figure 7-2 Photo Collection from Installed Camera Memory  

Note