Campbell CCFC Instruction Manual - 3. Initial
CCFC Field Camera
3
Modem Power Control
x Maximum Output Current: 750 mA
x 12 Vdc
RS-232 or RS-485
x Maximum Baud rate: 115.2 KBaud
For RS-232: The maximum recommended cable length at 115.2 K
BAUD rate is 15 m. The use of the 57.6 KBAUD rate has a
recommended maximum cable length of 30 m (90 ft).
For RS-485: A user-supplied (twisted pair) cable could be spliced
onto the communication wires to extend to a maximum cable
length of 305 m (1000 ft). Power wires still need to be kept to the
20 m (65 ft) factory length (or 0.7 Ohm user-supplied spliced
cable) limit.
Camera Memory
x File Type: jpeg (photo); avi (video)
x Size: 16 GB
Zoom
x 18x Optical zoom
3. Initial
Inspection
x Upon receipt of the CCFC, inspect the packaging and contents for damage.
File any damage claims with the shipping company. Immediately check
package contents against the shipping documentation. Contact Campbell
Scientific about any discrepancies.
x The model number and cable length are printed on a label at the
connection end of the cable (if a cable was purchased). Check this
information against the shipping documents to ensure the expected product
and cable length are received.
x The CCFC is shipped with a Quick Start Guide, 2 screws, 2 lock washers,
2 flat washers, 4 Lens wipes, a ResourceDVD, and the Female DB9 to
Terminal block adaptor (L28840).
4. Quick
Notes
4.1 CCFC
General
x The LED will flash when the camera is in an Active Power State.
x When the LED is steadily on, the camera is booting up. Avoid
interrupting this process.
Note