Canon ImageCLASS MF4690 Service Manual - page 100
Chapter 9
9-2
9.3 Parts Replacement Procedure
9.3.1 Front Cover
9.3.1.1 Removing the Front Cover
0016-4962
1) Remove the paper cassette [1].
F-9-2
2) Open the control panel [1].
3) Open the printer cover [2].
4) Remove the front cover [5].
- 2 screws [3]
- 2 claws [4]
F-9-3
9.3.2 Rear Cover
9.3.2.1 Preparation for Removing the Rear Cover
0016-4964
1) Remove the front cover.
2) Remove the right cover.
3) Remove the left cover.
9.3.2.2 Removing the Rear Cover
0016-4965
1) Remove the 2 shafts [1], and detach the rear cover [2].
F-9-4
2) Remove the rear cover 2 [3].
- 4 screws [1]
- 2 claws [2]
F-9-5
9.3.3 Right Cover
9.3.3.1 Removing the Right Cover
0016-4966
1) Remove the front cover.
2) Unhook the 6 claws [1], and detach the right cover [2].
F-9-6
9.3.4 Left Cover
9.3.4.1 Removing the Left Cover
0016-4972
1) Remove the front over.
2) Close the printer cover [1].
3) Disengage the claw to remove the holder [2].
F-9-7
4) Remove from the damper rail while picking the damper [1]