Canon ImageCLASS MF4690 Service Manual - page 160
Chapter 14
14-20
Bit 6 details
Select whether to enable the host machine to work as a USB storage device or not. If the host machine is plugged into a PC with this setting enabled, it allows user
registration data (user data and telephone registration data) to be imported and exported to and from the PC, except for the data embedded in the department man-
agement information and user management IDs in the system management information.
14.9 Counter Indication (COUNTER)
14.9.1 Counters
0016-2108
This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies. The counter
set increments by one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).
T-14-19
14.9.2 Clearing Counters
0016-2110
- Maintenance counter all clear
Execute service mode > CLEAR > COUNTER to clear all maintenance counters.
2
Not used
-
-
3
Not used
-
-
4
Not used
-
-
5
Not used
-
-
6
Imports and exports user information via USB.
Enable
Disable
7
Not used
-
-
Maintenance counter list
Item
Counter
Explanation
TOTAL (Total counter)
SERVICE1
Service total counter 1
SERVICE2
Service total counter 2
TTL
Total counter
COPY
Total copy counter
PDL-PRT
PDL print counter
FAX-PRT
Fax print counter
RPT-PRT
Report print counter
2-SIDE
Double-sided copy/print counter
SCAN
Scan counter
PICK-UP (Paper pickup counter)
C1
Cassette jam counter
C2
Not used
C3
Not used
C4
Not used
MF
Multi-purpose tray pickup total counter
2-SIDE
Double-sided paper pickup total counter
FEEDER (Feeder related counters)
FEED
ADF pickup total counter
DFOP-CNT
Not used
JAM (Jam counters)
TTL
Unit total jam count
FEEDER
ADF total jam count
SORTER
Not used
2-SIDE
Duplex unit jam counter
MF
Multi-purpose tray jam counter
C1
Cassette jam counter
C2
Not used
C3
Not used
C4
Not used
MISC (Other required counter)
WST-TNR
Not used
Bit
Function
1
0