Concept Pro VXH960-16 User Manual - page 15

12

Network Connection

Installation

Network 

Connection

PC connection in the local network

You can connect the VXH960 to a network so that it can be accessed via a PC.

1.  

Connect the [WAN(UPLINK)] port in the rear panel to the router or hub.

R

    The LAN (DOWN LINK) port is reserved and only for servicing and development. 

(Do not connect devices to this port.)

2.  

Connect the local PC to the router or hub.

3.  

Enter the address in the Web browser of your PC in the format of: “http://IP address:Web service port”

(Ex: http://192.168.0.23:8080) The web service port is set to 8080 by default. From the Network   

Setup screen, you can change the port number.

R

     If using the dedicated PC S/W, refer to the user manual of the program.

4.

 Provide the ID and password bfore logging in, then you can view the monitoring screen.

Factory defaults are: User ID: ADMIN, Password: 1234

   !

      For security purpose, change the password before you use the product for the fi rst 

       time after purchasing it.