Concept Pro VXH960-16 User Manual - page 49
46
System Information
You can check the current system version and system-related settings.
1.
From
2.
Check the status of the current system.
3.
When done, press the [EXIT] button on the remote control or click
the previous menu.
Control Device
Confi gure the settings of the remote control and keyboard controller.
R
This function is provided for controlling individual DVR separately
to using a control device or remote control, in case the site has
multiple DVRs of the same model.
1.
From
2.
Use the [pqtu/ENTER] buttons on the remote control
or use the mouse to set the connection options for the control device.
>
SYSTEM ID: Set the ID of the VXH960 so that the keyboard
controller can control the correct VXH960.
>
PROTOCOL: Set up the protocol of the keyboard controller.
>
BAUD RATE: Specify the RS485 communication speed.
>
REMOTE CONTROLLER ID: Set the ID of the remote control.
3.
To apply the change, click
4.
When done, press the [EXIT] button on the remote control or click
you will return to the previous menu
System Setup
System
Settings