Concept Pro VXH960-16 User Manual - page 47
44
System Setup
System
Settings
System Management
You can check, update or reset the system information.
1.
From MANAGEMENT>. 2. Use the [pqtu/ENTER] buttons on the remote control or use the mouse to set each option of the system management. > FW UPDATE: you can update the current software with the latest version. > FACTORY DEFAULT: Return the VXH960 settings to the factory default. ! If you proceed to upgrade the fi rmware or reset the VXH960 to the factory default, all current settings of the DVR will be erased. The settings of the DVR will have to be confi gured again. > SYSTEM DATA: Save the system settings or get the system information from another device. - SAVE: Store the DVR settings to a storage device. Connect the storage device to the USB port of the DVR - LOAD: Apply the settings of the storage device to the DVR. Connect the storage device to the USBportofDVR. > SYSTEM ID: Set the main unit’s system ID. > PASSWORD: Open or close the dialog box for setting the menu’s: quit, system settings, record settings, archiving, and search. ! If it is set to and access to all menus will be restricted. > EXPIRED TERM OF PASSWORD: You will be prompted to change the current password after a certainperiodoftime. > AUTO LOGOUT: If there is no user input for a certain period of time, you can set to log out automatically. > WAIT TIME: Specify the waiting time for Auto Logout. 3. When done, press the [EXIT] button on the remote control or click