Concept Pro VXH960-16 User Manual - page 86
83
Setup
Web Viewer
Covert Setting
To to hide the video of a specifi c camera from a specifi c user group tick
the check box against the channel in the correct user group column. When
done, click
PTZ Setting
You can set the camera ID, protocol, baud rate and data transmission speed
for each channel.
R
For information about how to set the PTZ, refer to “PTZ Settings”.
(page 30)
Privacy Mask
To set the privacy mask activate the channel
and then select an area of where the mask
is needed.
R
For more information on Privacy Mask
refer to “PRIVACY MASK.” (Page 30)
Motion Setting
To set each camera’s motion detection,
day and night time. Select a channel. Set
the mask area, activation and specify the
daytime range. When done, click
to apply the changes.
R
For information about how to set the
motion area, refer to “Motion Area Setup”.
(page 29)
TAMPER
To detect a tampering attempt on the installed camera, change the settings
here.
R
For information about how to set the TAMPER, refer to “TEMPER
DETECTION”. (page 31)