Concept Pro VXH960-16 User Manual - page 37
34
To add a sequence
1.
Click
2.
When the “ADD” dialog appears, enter a title using the virtual keyboard.
3.
Enter the name of the sequence and click
4.
When the
5.
When the “SEQUENCE SETUP” dialog appears, select a split mode that
you want to add from
6.
If the selected split mode is CONFIGURE displayed on
a channel you want to display in each split screen.
7.
Click
added to the Add Sequence list in order
8.
When done, click
After the sequence type is saved, you will return to the previous screen.
9.
Place your mouse cursor over a desired tile of added
Sequence, right click on it or press the [ENTER] button of the remote
control to edit or delete it.
To edit a sequence
1.
Select a sequence that you want to edit in the list.
2.
The “EDIT” dialog appears.
3.
Use the [pqtu/ENTER] buttons on the remote control or use the
mouse to edit the selected sequence.
>
SEQUENCE TITLE: enter a new sequence name.
>
ACTIVATION: specify the use of the sequence.
>
MODIFY: change the settings of the sequence mode.
>
DELETE: delete the selected sequence list.
>
CANCEL: cancel the changes.
4.
Pressing the
5.
To change the existing settings, select a screen mode that you want
to edit and right-click to display the context menu. Then, select
6.
When done, click
7.
To apply your changes, click Display Settings System Settings