Concept Pro VXH960-16 User Manual - page 43
40
DDNS
You can confi gure the DDNS settings so remote users who are connected to
the network can access the VXH960H remotely
R
DDNS is an IP redirection service in a dynamic IP environment that
redirects the new IP address to a registered domain name each
time the IP address is changed..
1.
From
2.
Use the [pqtu/ENTER] buttons on the remote control or use the
mouse to specify the use of DDNSand select a server.
>
DDNS: Specify the use of DDNS connection.
>
DDNS SERVER: Select a server to connect to.
>
DVR NAME: Enter the name of the DVR that you want to use
as DDNS.
>
DDNS REGISTRATION TEST: Check if the
can be set as DDNS. If there is a duplicate name in the server,
the registration will fail. If this is the case, rename the
>
DVR ADDRESS: Provide the
automatically.
>
DDNS CONNECTION TEST: Perform the connection test to
check if DDNS is normally registered
3.
To apply the change, click
4.
When done, press the [EXIT] button on the remote control or click
you will return to the previous menu.
Network Setup
System
Settings