Connex ProSight Installation And Operation Manual - page 15
Manual is about: HD FPV Vision Kit (Transmitter, Receiver, Camera) for Drone
of
78
15
Installing the Units|Connecting Components to Drone
Doc P/N: 9040962 | Rev 04 | Printed 03 January 2017
Navigation pane
Mounting the Camera
Mount the camera on the front of the drone mounting plate.
The rubber vibration dampers serve as shock absorbers and help
reduce the “Jello” effect in the incoming video.
1. Insert the rubber dampers (3) through the mounting holes in the
camera base (2) and in the drone mounting plate (1).
2. Secure the damper pins (4) and locking clips (5).
3
2
1
4
5
4
Tip:
The camera can be installed using screws instead of dampers.
CONNEX ProSight Installation and Operation Guide